What times are you guys running on n20?

[LeanPocket]

just curious.. saw a cam bolt on ls3 m6 run a 10.2.. thats movin!

Post your times, and mods please

[LeanPocket]

C'mon guys :p

[dekan513]

messing around the other day on stock tires ran a 11.5 @ 127 just sprayed the last 1/8 or so . had a 125 jet but i didnt try to heat the bottle or nothing track was about to close. had 500 or so psi. also had it set to progress the shot in from 25% to 100% each gear change over a 1/2 second. these cars love n20 .
it eats that extra weight up . u gain a shit ton of tq.

[VanquisherSS]

Originally Posted by dekan513

it eats that extra weight up . u gain a shit ton of tq.

Hell yeah, I'm making over 800ft/tq at like 3000rpm on the spray feels like a rocketship.

[dekan513]

if u sprayin 100 rwhp, ur possibly getting 125-150 rwtq. its awesomeness lol

[LeanPocket]

Originally Posted by dekan513

messing around the other day on stock tires ran a 11.5 @ 127 just sprayed the last 1/8 or so . had a 125 jet but i didnt try to heat the bottle or nothing track was about to close. had 500 or so psi. also had it set to progress the shot in from 25% to 100% each gear change over a 1/2 second. these cars love n20 .
it eats that extra weight up . u gain a shit ton of tq.

oh yeah! wish it were more mainstream for these cars! still very awesome times. What mods did u have on the car?

[dekan513]

g6x3 cam, obx 1 7/8 lth. 2.5 magnaflow comp catback, rotofab intake, 1le axels , 90mm hsw nitrous plate, nos launcher progressive controller , lnc2000 timing box. if i can ever get around and mount my radials, i should be able to hit 10's consistantly.

ive racex

[LeanPocket]

Originally Posted by dekan513

g6x3 cam, obx 1 7/8 lth. 2.5 magnaflow comp catback, rotofab intake, 1le axels , 90mm hsw nitrous plate, nos launcher progressive controller , lnc2000 timing box. if i can ever get around and mount my radials, i should be able to hit 10's consistantly.

ive racex

Sounds like what im putting on my car.
Doing 25% UDP, 2" TSP headers, TSP CAI, heads, p&p tb, ported ls3 itnake, custom 3 bolt 23x/23x cam, 150 shot N/O plate, FTI 3800 hard hit stall, drag radials. Im hopin for 10's.. but dam thats some good times on street tires!

any videos?

[dekan513]

u will be 10's all day . if i had a clutch im pretty sure i could get low 11's on st. tires lol.

my next steps are rxt clutch , 3.91 gear, port tb, port intake, under drive 25% got some vette rims and some radials alrdy just got to get them mounted and some spacers .

[dekan513]

Originally Posted by LeanPocket

Sounds like what im putting on my car.
Doing 25% UDP, 2" TSP headers, TSP CAI, heads, p&p tb, ported ls3 itnake, custom 3 bolt 23x/23x cam, 150 shot N/O plate, FTI 3800 hard hit stall, drag radials. Im hopin for 10's.. but dam thats some good times on street tires!

any videos?

we have a old airport that they hold the hillbilly arm drops drags on . we go down there between events and on a roll from 20 or so i can pull 2 vettes that run 10.8s them on motor. but on a track my clutch slips with a full pressure bottle and a stick surface.

[VanquisherSS]

Originally Posted by dekan513

u will be 10's all day . if i had a clutch im pretty sure i could get low 11's on st. tires lol.

my next steps are rxt clutch , 3.91 gear, port tb, port intake, under drive 25% got some vette rims and some radials alrdy just got to get them mounted and some spacers .

How long before your clutch started going. I'm at 900whp/810ft/lb on a 100shot. Stock clutch still

[Crusin225]

With a Bad clutch on 20s I ran 11.5 at 124 mods 2300 Maggie, cam Lt, and Borla cat back

[Trackman]

Newbie here...
Do you guys run race fuel when you play with nitrous or just 93 with timing retard?

[VanquisherSS]

Originally Posted by Trackman

Newbie here...
Do you guys run race fuel when you play with nitrous or just 93 with timing retard?

I have a dedicated fuel setup that turns the pump on when I arm the nitrous. Timing is still pulled but this way I don't tax the car's fuel system. I'm running VP109 in the 1 gallon cell.