Race Ramps RR-XT-2 67" question... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jayno20 · 05-05-2017, 12:43 PM

I just bought these and when setting them in front of my ZL1 the front lip BARELY clears, I mean like less than a quarter of an inch of clearance. I am NOT lowered. Are any of you guys noticing this same thing?

ZMEnow · 05-05-2017, 01:21 PM

It's been a few years since I used mine because I bought a lift, but I don't remember any issue that concerned me when pulling on for oil changes.

jayno20 · 05-05-2017, 01:37 PM

I didn't think I'd have any either, but that is a lot closer than I expected it to be.

jayno20 · 05-05-2017, 02:35 PM

I saw a few people suggesting the 56" ramps and saying they work with the ZL1, I don't know how that is possible if the 67" version is this tight on my car....

Boother · 05-05-2017, 03:56 PM

Quote:

Originally Posted by jayno20

I saw a few people suggesting the 56" ramps and saying they work with the ZL1, I don't know how that is possible if the 67" version is this tight on my car....

The ramp slope is the same between the 2 so there is no difference on the approach, only the height of the lift.

jayno20 · 05-05-2017, 03:58 PM

Quote:

Originally Posted by Boother

The ramp slope is the same between the 2 so there is no difference on the approach, only the height of the lift.

I see. Anyone have a picture of their car about to go up the ramp to tell me if the picture I posted is the same as what you see?

Crash76 · 05-05-2017, 04:29 PM

I use the trailer ramps 67" with 4.3 angle, lowered on DSE Springs...

And i have my air dams infront of the wheels

Candr3535 · 05-05-2017, 09:49 PM

I have the same ramps. No problem I promise...

flatrockguy · 05-06-2017, 04:06 AM

I have the same ramps also, and no problems

ZL1 Maniac · 05-06-2017, 10:34 AM

Ditto here, same ramps, closer than I thought it would be, but no problems.

However, I have yet to put the back of the car up on them.
What happens up front when you back up the ramps??

Jeff

ZMEnow · 05-06-2017, 02:36 PM

Quote:

Originally Posted by ZL1 Maniac

Ditto here, same ramps, closer than I thought it would be, but no problems.

However, I have yet to put the back of the car up on them.
What happens up front when you back up the ramps??

Jeff

I had no problems doing that..

ZL1 Maniac · 05-06-2017, 03:48 PM

Cool, kinda figured it would be ok, just haven't tried yet.

jayno20 · 05-06-2017, 10:12 PM

ok, no problems, but do they offer as little clearance as my picture shows for you as well?

ZL1 Maniac · 05-07-2017, 07:40 AM

Quote:

Originally Posted by jayno20

ok, no problems, but do they offer as little clearance as my picture shows for you as well?

Yes

05-05-2017, 12:43 PM	#1
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	Race Ramps RR-XT-2 67" question... I just bought these and when setting them in front of my ZL1 the front lip BARELY clears, I mean like less than a quarter of an inch of clearance. I am NOT lowered. Are any of you guys noticing this same thing? Attached Images

05-05-2017, 04:29 PM	#7
Crash76 Team 913 Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015 Location: USA, Central CA Posts: 1,119	I use the trailer ramps 67" with 4.3 angle, lowered on DSE Springs... And i have my air dams infront of the wheels Last edited by Crash76; 05-05-2017 at 04:44 PM.

05-05-2017, 09:49 PM	#8
Candr3535 Drives: 2013 ZL1 Triple Black Vert M6 #5591 Join Date: May 2013 Location: Galloway,NJ Posts: 747 View My Garage	I have the same ramps. No problem I promise... __________________ 695 RWHP / 660 RWTQ @ 13.5 PSI Dyna-Tech Headers Ceramic Coated w/Super Flo Cats, JRE Custom Rough Idle Racing Cam Package and 125 RWHP Pulley Kit w/ 28% pulley, Custom Tune by Ted, ID850 injectors, JMS Fuel Booster, NGK Plugs, MSD Plug Wires, Roto-Fab CAI, Roto-Fab Big Gulp, Elite Catch Can, Mild to Wild, 90mm VMaxx Ported Throttle Body, Skip Shift Elim., D3 Coolant Resevoir, Separated Clutch Resevoir, and Fuzzy Red Dice..

05-06-2017, 04:06 AM	#9
flatrockguy Drives: 2015 Black ZL1 m6, gone 2012 CTS-V Join Date: May 2014 Location: Metro Detroit Posts: 225 View My Garage	I have the same ramps also, and no problems __________________ 2021-ZL1, Black, 6spd ceramic coated 2019-CTS-V, Black Gone 2015-ZL1, Black 6spd, CAI, JRE 75rwhp Gone 2012-CTS-V, Black 6spd Gone

05-05-2017, 01:21 PM	#2
ZMEnow Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013 Location: Michigan Posts: 1,607	It's been a few years since I used mine because I bought a lift, but I don't remember any issue that concerned me when pulling on for oil changes.

05-05-2017, 01:37 PM	#3
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	I didn't think I'd have any either, but that is a lot closer than I expected it to be.

05-05-2017, 02:35 PM	#4
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	I saw a few people suggesting the 56" ramps and saying they work with the ZL1, I don't know how that is possible if the 67" version is this tight on my car....

05-06-2017, 10:34 AM	#10
ZL1 Maniac Drives: 2014 ZL1 Red Hot M6 Join Date: Oct 2012 Location: Ohio Posts: 75	Ditto here, same ramps, closer than I thought it would be, but no problems. However, I have yet to put the back of the car up on them. What happens up front when you back up the ramps?? Jeff

05-06-2017, 03:48 PM	#12
ZL1 Maniac Drives: 2014 ZL1 Red Hot M6 Join Date: Oct 2012 Location: Ohio Posts: 75	Cool, kinda figured it would be ok, just haven't tried yet.

05-06-2017, 10:12 PM	#13
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	ok, no problems, but do they offer as little clearance as my picture shows for you as well?