05-05-2017, 12:43 PM | #1 |
Go fast, please.
|
Race Ramps RR-XT-2 67" question...
I just bought these and when setting them in front of my ZL1 the front lip BARELY clears, I mean like less than a quarter of an inch of clearance. I am NOT lowered. Are any of you guys noticing this same thing?
|
05-05-2017, 01:21 PM | #2 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
It's been a few years since I used mine because I bought a lift, but I don't remember any issue that concerned me when pulling on for oil changes.
|
05-05-2017, 01:37 PM | #3 |
Go fast, please.
|
I didn't think I'd have any either, but that is a lot closer than I expected it to be.
|
05-05-2017, 02:35 PM | #4 |
Go fast, please.
|
I saw a few people suggesting the 56" ramps and saying they work with the ZL1, I don't know how that is possible if the 67" version is this tight on my car....
|
05-05-2017, 03:56 PM | #5 |
Drives: 14 ZL1 Join Date: Mar 2014
Location: Calgary
Posts: 167
|
The ramp slope is the same between the 2 so there is no difference on the approach, only the height of the lift.
|
05-05-2017, 03:58 PM | #6 |
Go fast, please.
|
|
05-05-2017, 04:29 PM | #7 |
Team 913
Drives: '14 ZL1, '15 Jeep GC, ‘22 Ram 2500 Join Date: Apr 2015
Location: USA, Central CA
Posts: 1,119
|
I use the trailer ramps 67" with 4.3 angle, lowered on DSE Springs...
And i have my air dams infront of the wheels Last edited by Crash76; 05-05-2017 at 04:44 PM. |
05-05-2017, 09:49 PM | #8 |
Drives: 2013 ZL1 Triple Black Vert M6 #5591 Join Date: May 2013
Location: Galloway,NJ
Posts: 747
|
I have the same ramps. No problem I promise...
__________________
695 RWHP / 660 RWTQ @ 13.5 PSI
Dyna-Tech Headers Ceramic Coated w/Super Flo Cats, JRE Custom Rough Idle Racing Cam Package and 125 RWHP Pulley Kit w/ 28% pulley, Custom Tune by Ted, ID850 injectors, JMS Fuel Booster, NGK Plugs, MSD Plug Wires, Roto-Fab CAI, Roto-Fab Big Gulp, Elite Catch Can, Mild to Wild, 90mm VMaxx Ported Throttle Body, Skip Shift Elim., D3 Coolant Resevoir, Separated Clutch Resevoir, and Fuzzy Red Dice.. |
05-06-2017, 04:06 AM | #9 |
Drives: 2015 Black ZL1 m6, gone 2012 CTS-V Join Date: May 2014
Location: Metro Detroit
Posts: 225
|
I have the same ramps also, and no problems
__________________
2021-ZL1, Black, 6spd ceramic coated
2019-CTS-V, Black Gone 2015-ZL1, Black 6spd, CAI, JRE 75rwhp Gone 2012-CTS-V, Black 6spd Gone |
05-06-2017, 10:34 AM | #10 |
Drives: 2014 ZL1 Red Hot M6 Join Date: Oct 2012
Location: Ohio
Posts: 75
|
Ditto here, same ramps, closer than I thought it would be, but no problems.
However, I have yet to put the back of the car up on them. What happens up front when you back up the ramps?? Jeff |
05-06-2017, 02:36 PM | #11 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
|
05-06-2017, 03:48 PM | #12 |
Drives: 2014 ZL1 Red Hot M6 Join Date: Oct 2012
Location: Ohio
Posts: 75
|
Cool, kinda figured it would be ok, just haven't tried yet.
|
05-06-2017, 10:12 PM | #13 |
Go fast, please.
|
ok, no problems, but do they offer as little clearance as my picture shows for you as well?
|
05-07-2017, 07:40 AM | #14 |
Drives: 2014 ZL1 Red Hot M6 Join Date: Oct 2012
Location: Ohio
Posts: 75
|
|
|
|
|
|