Race Proven Motorsports 2014 Dyno Day!!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Frans96ss · 04-21-2014, 12:45 PM

We are having our dyno day Saturday May 31st from 9-6 If you have been to these you know how fun they are. Food and drinks will be provided as always.
Dyno runs will be 3 for $75 W/AFR. Graph will be emailed to you.

Here is the event on facebook. Please click attend if you are coming so I can get an idea for food.

https://www.facebook.com/events/609273885825906/

Here are pics from last years event.

https://www.flickr.com/photos/545785...th/9171807524/

Frans96ss · 04-29-2014, 01:05 PM

Cant wait... hopefully weather is nice.

SteveDoten@ARH · 05-05-2014, 06:24 PM

In years past the turnout at Frans shop has been in the 100's. Def. worth stopping by if you are in the area.

Frans96ss · 05-05-2014, 09:48 PM

Quote:

Originally Posted by SteveDoten@ARH

In years past the turnout at Frans shop has been in the 100's. Def. worth stopping by if you are in the area.

Over 350 last year

Frans96ss · 05-26-2014, 02:33 PM

Weather is looking nice as of now

ChocoTaco369 · 05-28-2014, 09:00 PM

I'm coming by. Definitely looking forward to it. I hope the line isn't half the state of Delaware!

Weather on Saturday says mostly sunny, 75 for New Castle. You can't ask for a more perfect day.

ChocoTaco369 · 05-31-2014, 03:01 PM

Loads of fun today and a great turnout. I showed up around 9:45AM and it was pretty quiet, but the place came to life quickly. I actually regretted coming so early - I was on the dyno within 15 minutes! IAT's were right off the road, and I'm guessing my car would've showed some better numbers if it could've cooled off for an hour or two.

I have kept my car bone stock aside from the shifter to baseline it. Word is we'll get mailed our charts via email on Monday so I'll keep my eyes open. Aside from that, this is the best I can do.

You can't really see it, but the best run was 376 RWHP/380 RWTQ. Honestly, having a 2013 with NPP I was hoping I'd show around 10 RWHP more, but again, heat soak was likely an issue that took a couple away from me.

This was my favorite, apparently homemade. Too cool. It can't weigh much more than 1200 lbs and put down around 446 RWHP (I think from memory), so it must fly.

I also had to photograph this beauty currently under construction.

If you're local to the area and haven't checked this place out, it's definitely worth a trip. It's a very nice, large, impressive facility. Truly something to be proud of building. My 4th gen Firebird blew up last year and I'm having the itch to build it when the funds become available and Fran is on my short list.

Sales tax free doesn't hurt

jkowalski · 05-31-2014, 09:45 PM

I was there today also but didn't make it until around 10:30 also dynoed my car has a few little mods but did sit for about 2hrs before I got on the Dyno made 405hp/390tq

04-21-2014, 12:45 PM	#1
Frans96ss Drives: 96SS Join Date: May 2009 Location: New Castle Delaware Posts: 1,948	Race Proven Motorsports 2014 Dyno Day!!!! We are having our dyno day Saturday May 31st from 9-6 If you have been to these you know how fun they are. Food and drinks will be provided as always. Dyno runs will be 3 for $75 W/AFR. Graph will be emailed to you. Here is the event on facebook. Please click attend if you are coming so I can get an idea for food. https://www.facebook.com/events/609273885825906/ Here are pics from last years event. https://www.flickr.com/photos/545785...th/9171807524/

05-28-2014, 09:00 PM	#6
ChocoTaco369 145lb Powerlifter Drives: 2013 Camaro 2SS RS LS3 Join Date: Jan 2014 Location: Conshohocken, PA Posts: 1,146	I'm coming by. Definitely looking forward to it. I hope the line isn't half the state of Delaware! Weather on Saturday says mostly sunny, 75 for New Castle. You can't ask for a more perfect day. __________________

05-31-2014, 03:01 PM	#7
ChocoTaco369 145lb Powerlifter Drives: 2013 Camaro 2SS RS LS3 Join Date: Jan 2014 Location: Conshohocken, PA Posts: 1,146	Loads of fun today and a great turnout. I showed up around 9:45AM and it was pretty quiet, but the place came to life quickly. I actually regretted coming so early - I was on the dyno within 15 minutes! IAT's were right off the road, and I'm guessing my car would've showed some better numbers if it could've cooled off for an hour or two. I have kept my car bone stock aside from the shifter to baseline it. Word is we'll get mailed our charts via email on Monday so I'll keep my eyes open. Aside from that, this is the best I can do. You can't really see it, but the best run was 376 RWHP/380 RWTQ. Honestly, having a 2013 with NPP I was hoping I'd show around 10 RWHP more, but again, heat soak was likely an issue that took a couple away from me. This was my favorite, apparently homemade. Too cool. It can't weigh much more than 1200 lbs and put down around 446 RWHP (I think from memory), so it must fly. I also had to photograph this beauty currently under construction. If you're local to the area and haven't checked this place out, it's definitely worth a trip. It's a very nice, large, impressive facility. Truly something to be proud of building. My 4th gen Firebird blew up last year and I'm having the itch to build it when the funds become available and Fran is on my short list. Sales tax free doesn't hurt __________________

04-29-2014, 01:05 PM	#2
Frans96ss Drives: 96SS Join Date: May 2009 Location: New Castle Delaware Posts: 1,948	Cant wait... hopefully weather is nice.

05-05-2014, 06:24 PM	#3
SteveDoten@ARH Drives: 2010 SS, (ARH/Farks 8sec car) Join Date: Jul 2013 Location: Deer Park, NY Posts: 140	In years past the turnout at Frans shop has been in the 100's. Def. worth stopping by if you are in the area.

05-26-2014, 02:33 PM	#5
Frans96ss Drives: 96SS Join Date: May 2009 Location: New Castle Delaware Posts: 1,948	Weather is looking nice as of now

05-31-2014, 09:45 PM	#8
jkowalski Drives: 2014 summit white 1ss 1le Join Date: Apr 2014 Location: wilmington delaware Posts: 11	I was there today also but didn't make it until around 10:30 also dynoed my car has a few little mods but did sit for about 2hrs before I got on the Dyno made 405hp/390tq