01-08-2024, 04:53 PM | #1 |
Drives: 2010 Camaro SS 416 ci in ls3 LSA Join Date: Dec 2023
Location: Foristell, MO
Posts: 3
|
Serpentine belt part #
I'm looking to see if anyone has my setup. I have a 2010 ss camaro and have the innovators west 8 rib kit and 10% od balancer with the lsa blower. I wanted to know if anyone had a part # for the 8 rib serpentine belt. I just got the iw kit installed and don't want to order a half dozen belts. Any help would be greatly appreciated.
|
01-08-2024, 05:00 PM | #2 |
Drives: 2010 Camaro SS 416 ci in ls3 LSA Join Date: Dec 2023
Location: Foristell, MO
Posts: 3
|
I tried an 880k8 today and it was too short.
|
01-08-2024, 05:19 PM | #3 |
Drives: 2013 ZL1 Join Date: Sep 2021
Location: Virginia
Posts: 317
|
Take an old belt cut it and measure then put it on the car and measure the gap on the belt and add that to the length of the belt and tell the parts store the length you need.
|
|
|
|
|