01-17-2012, 05:51 PM | #29 |
Flying da helicopter
|
I plan on installing my Kooks 1 7/8 and high flow cats with Borla Atak catback, will I have to cut anything or will it just connect without issues? Thanks
|
02-25-2012, 05:57 PM | #30 |
Recalled user
Drives: '12 Camaro SS, '18 Colorado Z71 Join Date: Mar 2009
Location: Richmond, VA
Posts: 3,419
|
Same question, there's some confusion about when cutting is required.
__________________
2012 2SS 45th AE LS3 M6 Borla ATAK Catback Kooks Stepped LT Headers CAI Intake Hexvents VMAX CNC Ported Throttle Body RX Catch Can Hurst Short Throw Shifter Pfadt ZL-Spec Stage 3 Suspension Forgestar F14 Tuned by Frost |
02-25-2012, 08:34 PM | #31 |
AquaRob
Drives: ABM RS\SS; 69 427 Camaro; 1970 Z28 Join Date: Mar 2010
Location: Bagram Air Base, Afghanistan
Posts: 648
|
Cutting???
I put a set of 1 7\8" Kooks, Cat deletes, etc. and it was all done in less than 2 hours. Didn't remove or cut a thing. Not sure what the H is going on as far as this whole steering column deal, etc.
__________________
Centerline, Weld, Holley, Nick Williams, GMPP, Diamond, ARP, Callies, Nelson Racing, Pro Torque, Strange, J&S Polishing, RMCR, AAC, MBRP, Flowmaster, FAST, Comp Cams, RX Performance, Aeroquip, Spectrum Powder-Coating, Current Performance, RX,TDub Racing, DSS, Fore Innovations, Aeroquip, Earl's, BMR, Ximpac, MPD,Street Scene, Blood, Sweat and Tears
|
02-26-2012, 08:43 AM | #32 |
My car runs on acorns....
Drives: 2010 SS RS Inferno Orange Join Date: Feb 2010
Location: Albuquerque
Posts: 1,351
|
When installing Headers and cats, typically no cutting. There's a sleeve after the cats that hooks up to the catback exhaust. All the brands I've seen are designed to fit in this sleeve.
If your just doing exhaust and not headers you'll probably be cutting your exhaust, varies by brand.
__________________
My car runs on acorns, the tears of ricers and these other slightly less important things...
2.9 Polished Whipple, Kooks LT 1 7/8 headers, HiFlow Cats, Kooks Sleeper catback, Cooling Mist Methanol Injection, PFADT Sport Sways, PFADT Springs, PFADT rear trailing arms, ADM intake, JDP stainless brake lines, Jegs Catch can, Stock SS wheels widened to 10 3/4, Hawks HPS Pads, Pedders Rear Subframe Bushing Inserts, BMR Center Brace, MSD BAP, AAC side markers, Emblem Pro's Custom Lighted Door Sills, Dash-Floor-Cupholder ABL lighting and other stuff.... |
02-26-2012, 10:56 PM | #33 |
Brianskeet
|
Dose anyone have a photo of the steering shaft hook up? I am doing this job very soon and would be interested in seeing it.
__________________
ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats
|
02-29-2012, 07:38 PM | #34 |
Drives: Inferno orange 2011 SS, 6 speed... Join Date: May 2011
Location: Madison, In
Posts: 81
|
OK, i got my Kooks long tubes, off road x pipe and mufflers installed today. it was a pain in the ass getting the stock manifolds off, both pre cat o2 sensors threads broke off while coming out of the pipe (yes i am being serious). On the plus side both new o2 sensors will be here tomorrow, and it only took me like 2 minutes to get the headers slid into place and bolted in and another 30 minutes later i had the rest of the exhaust put into place. by far the best and easiest install ever minus having to spend almost another $300 on my o2 sensors.
|
02-29-2012, 08:14 PM | #35 |
Brianskeet
|
Did you heat the O2 sensor bungs prior to trying to remove them? I am doing this install tomorrow and trying to be ready for any potential hick ups. From what I am reading they come loose much easier if you do it while they are still hot or hit them with a heat gun and some liquid wrench first.
__________________
ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats
|
02-29-2012, 08:15 PM | #36 |
Drives: Inferno orange 2011 SS, 6 speed... Join Date: May 2011
Location: Madison, In
Posts: 81
|
yea i heated them up.
|
02-29-2012, 08:50 PM | #37 |
Brianskeet
|
Well, not much for me to do now except take my best shot at it in the morning.
__________________
ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats
|
02-29-2012, 08:51 PM | #38 |
Drives: Inferno orange 2011 SS, 6 speed... Join Date: May 2011
Location: Madison, In
Posts: 81
|
Like I said it was easy as can b. the threads just broke on me.
|
02-29-2012, 09:47 PM | #39 |
Brianskeet
|
Keep a good thought for me! I would really like to avoid having to buy new sensors right now. This seems to be the most common problem. Apparently GM didn't bother with anti-seize and got a bit carried away with the torque as well.
__________________
ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats
|
03-01-2012, 05:14 PM | #40 |
Drives: Inferno orange 2011 SS, 6 speed... Join Date: May 2011
Location: Madison, In
Posts: 81
|
Well did u get it done today? I took mine out today and wow does it sound good! It's louder and deeper than I thought it would b and that's a plus
|
03-01-2012, 07:45 PM | #41 |
Brianskeet
|
I got it done and my O2 sensors gave up with only a small fight and were in plenty good shape to reuse. Thank Goodness! I unhooked the firewall ends and dropped the manifolds so I could have lots of room while I worked on the sensors. A little soaking with liquid wrench while I worked on other stuff and then I hit the other side of the pipe with a torch for a couple minutes till the liquid wrench started to smoke off. The base hobby shop had good high quality O2 sensor sockets and that made all the difference. They gave up with only a few grunts and groans from me. Thanks for the heads up. Being really ready for a fight made me come out on top.
__________________
ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats
|
06-20-2012, 11:47 AM | #42 |
It was ninety nine cents!
|
Installing LT's with the guidance of some more knowledgeable friends sometime in the next few weeks... this was extremely helpful. Bump for a great thread!
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAMARO WIKI | Tran | Wiki | 66 | 04-22-2024 11:41 AM |
Vortech Supercharger Systems for 2010 Camaro Official Release | Brian@Vortech | Forced Induction - V8 | 98 | 02-19-2010 11:04 PM |
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS | CamaroScotty | 5th Gen Camaro SS LS LT General Discussions | 338 | 04-15-2009 05:33 PM |