Project Gt500 slayer is almost done - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

The Baron · 03-17-2013, 06:24 PM

The final stage of the project is almost finished.. car started this afternoon and all thats left is the meth install and then off to tune and dyno, then off to Bradenton for the real stuff..

here is a quick vid.. just a start file and start up to make sure everything was sealed up.. car bounces to 14 pounds by like 4000 rpm..lol it is going to be interesting for sure to see how much boost it makes. The blower speed is going to be about 25,000 rpm..i cant find the chart but I remember calculating it to about that. im thinking it will be about 18 pounds. Even with the extreme porting im pretty sure the blower is maxxxxxed out..any more speed and even if i can keep the inlet temps down and octane high enough the rotor speed will soon start getting into a very dangerous redline.. i know they explode about 26,000 rpm..lol

mods list
I.D 850 injectors
LPE cold air
LPE 2.38 upper pulley
N/w 102 tb
LPE 9.11 lower pulley
TSP 2" headers
C.B.I custom grind (nickname E.S.A.D)
Ported blower and snout (baron racing lol)
head studs
ls9 gaskets
C.B.I custom meth kit (single nozzle for now)
3600 rpm stall ( i am hoping its not to loose)
20" weld RT's front and back...
DSX tuneing

goal... anything in the 10s on a 20" tire and any mph over 130.. Im pretty sure im there..

CanadianZL1#992 · 03-17-2013, 07:12 PM

Here's the chart. Nothing like running it right on the edge!!

ayousef · 03-17-2013, 07:22 PM

awesome! Now im wondering are those wheels streetable? and how much weight did they save over the ZL1 wheels

The Baron · 03-17-2013, 07:59 PM

they are welds street wheels.. that dont mena they wont bend but hey..lol

they are a few pounds lighter than the stock wheel.. i got the widest fronts though because i wanted a street setup and not to completly ruin the car..

Makinrain · 03-17-2013, 08:11 PM

You coming to Bradenton, Fl?

The Baron · 03-17-2013, 09:00 PM

as long as everything works this week in the tuning stage, Ill be in the RPM transmission pit.

DadzZL1 · 03-18-2013, 08:44 AM

That thing sounds NASTY!

Rainman1 · 03-18-2013, 04:10 PM

Quote:

Originally Posted by The Baron

as long as everything works this week in the tuning stage, Ill be in the RPM transmission pit.

Sounds great. With all those mods, why did you choose not to replace the throttle body?

The Baron · 03-18-2013, 04:51 PM

Quote:

Originally Posted by Rainman1

Sounds great. With all those mods, why did you choose not to replace the throttle body?

Its got a nick Williams 102 on it.. I guess I forgot to add that to the list.. fixed

Rainman1 · 03-18-2013, 05:32 PM

Quote:

Originally Posted by The Baron

Its got a nick Williams 102 on it.. I guess I forgot to add that to the list.. fixed

I'm sure you forgot to add injectors to your list. But what about fuel pump upgrade?

Stephen12ZL1 · 03-18-2013, 07:04 PM

I remember a previous post about ID850s

Trackman · 03-18-2013, 09:25 PM

subscribed.

NASTY99Z28 · 03-19-2013, 06:27 AM

Gt500 "slayer"? That's a bold statement friend and I wish u the best of luck but a light bolt on gt500 will give u a hard time even with those mods.

sammyv · 03-19-2013, 06:38 AM

What a beast! Looking forward to dyno no's and 1/4 mi times!

03-17-2013, 07:12 PM	#2
CanadianZL1#992 ANGRY Z Drives: 2015 Camaro ZL1 Join Date: May 2012 Location: Alberta, Canada Posts: 1,406	Here's the chart. Nothing like running it right on the edge!! Attached Images

03-17-2013, 07:22 PM	#3
ayousef Drives: 2013 ZL1 Join Date: Oct 2012 Location: Dubai Posts: 757	awesome! Now im wondering are those wheels streetable? and how much weight did they save over the ZL1 wheels __________________ 1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1

03-17-2013, 07:59 PM	#4
The Baron Drives: 2013 zl1 Join Date: Nov 2012 Location: st louis Posts: 838	they are welds street wheels.. that dont mena they wont bend but hey..lol they are a few pounds lighter than the stock wheel.. i got the widest fronts though because i wanted a street setup and not to completly ruin the car.. __________________ 2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far..

03-17-2013, 09:00 PM	#6
The Baron Drives: 2013 zl1 Join Date: Nov 2012 Location: st louis Posts: 838	as long as everything works this week in the tuning stage, Ill be in the RPM transmission pit. __________________ 2011 cts-v coupe (pinky) wifes car.. ls9 cam c.a.i. 11.44 2007 corvette vert ..retired.. 2013 zl1 stock blower stock ci 20" wheels 10.36 135...so far..

03-18-2013, 08:44 AM	#7
DadzZL1 Drives: 2012 Camaro ZL1, 2013 Porsche 911 Join Date: Feb 2013 Location: Florida Posts: 27	That thing sounds NASTY! __________________ 6 Speed Manual with nothing else needed

03-17-2013, 08:11 PM	#5
Makinrain Drives: 2012 ZL1 Join Date: Aug 2012 Location: Jacksonville, Fl Posts: 42	You coming to Bradenton, Fl?

03-18-2013, 07:04 PM	#11
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	I remember a previous post about ID850s __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

03-18-2013, 09:25 PM	#12
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,408	subscribed.

03-19-2013, 06:27 AM	#13
NASTY99Z28 Drives: 99z28 with bolt-ons and a mwc fab 9 Join Date: Jul 2012 Location: Florida Posts: 1,277	Gt500 "slayer"? That's a bold statement friend and I wish u the best of luck but a light bolt on gt500 will give u a hard time even with those mods. __________________ I like my woman like my milk shakes, THICK!!!!

03-19-2013, 06:38 AM	#14
sammyv Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012 Location: zionsville IN Posts: 567	What a beast! Looking forward to dyno no's and 1/4 mi times!