04-13-2010, 06:27 PM | #1 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
Turn Key Engine Supply 700hp LS3
i got the LS3 700hp package for my 2010 Camaro SS from a company called Turn Key Engine Supply http://www.turnkeyenginesupply.com/E...1&key=packages on top of that i asked them to port the heads for extra 30hp to 35hp, what do you guys think of the price, i compared all engine packages from hennessey performance store, SLP Performance Parts and Lingenfelter Performance Engineering all there engine packages that are 700hp or above cost more then $35000 , so what do you think of my choice guys.
|
04-13-2010, 06:35 PM | #2 |
Drives: 2010 2SS IOM L99 Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,545
|
price doesn't sound bad.isn't this company in california?
looks like you are in kuwait. |
04-13-2010, 06:50 PM | #3 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
Lool yes that is true but that didn't stop me from buying it.
|
04-13-2010, 07:47 PM | #4 |
Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
is the 700HP rating at the flywheel, or tire?
Do you get a warranty? |
04-13-2010, 08:02 PM | #5 |
NOICE!!! ™
|
I'm pretty sure that's at crank
__________________
|
04-13-2010, 08:06 PM | #6 |
Account Suspended
Drives: 2021 Camaro ZL1 Join Date: Jan 2010
Location: Swamplands Of Louisiana
Posts: 106
|
That seems about 14K over priced but with the $$$ you guys have in the Middle East Go For It!!!!
BW |
04-13-2010, 11:45 PM | #7 |
|
looks like a monster!
|
04-13-2010, 11:49 PM | #8 |
Drives: 2010 camaro Join Date: May 2009
Location: PA
Posts: 395
|
Those are ls2 heads. I would say ask if you could get it with ls3 heads because they have had that engine out for a while with ls2 heads, and KB just came out with a blower that fits the ls3 head
|
04-14-2010, 05:09 AM | #9 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
well in the invoice it shows that they are L92 heads am not sure if that means LS2 or LS3
|
04-14-2010, 05:32 AM | #10 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
i dont think it is over priced i bet you cant fined a new supercharged LS3 engine with the same HP ratings and specs for 14K less if you did let me know and i will give you $1000 bonus, and it has nothing to do me got $$$ because i am from the "Middle East" even if i am $$$ am not stupid, i have not found one good company that builds Supercharged LS3 engines with HP ratings above 700hp but this one (Blueprint Engines, Cosworth LLC, Don Hardy Race Cars, Edelbrock, FE Specialties, H&H Flatheads, Jasper Engines & Transmissions, Mancini Racing, Murray's Speed & Custom,Nelson Racing Engines Inc., Performance Parts, Roush Performance, Weber Motor few of them builds them upon request only but wont give any warranty and so you see i did my home work.
|
04-14-2010, 06:57 AM | #11 |
Drives: Transformers Edition Camaro 2SS/RS Join Date: Jan 2010
Location: Mass
Posts: 1,048
|
How do they get 700HP with a 9.0 to 1 compression Ratio??
How do they get 700HP with a 9.0 to 1 compression Ratio??
__________________
The Yellow Camaro Club
http://www.camaro5.com/forums/group.php?groupid=128 Northern Massachusetts & Southern New Hampshire Camaro Club http://www.camaro5.com/forums/group.php?groupid=127 The mother of all supercharger questions thread http://www.camaro5.com/forums/showthread.php?t=77958 My 2010 Camaro Review http://www.camaro5.com/forums/showthread.php?p=2025442#post2025442 2010 Transformer Edition Camaro L99 Auto |
04-14-2010, 07:00 AM | #12 | ||
|
Quote:
Quote:
a lot of boost maybe im just guessing.. im no expert |
||
04-14-2010, 04:56 PM | #13 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
well the supercharger is set for 10psi for a 98 octane fuel and that showed 700hp with a higher octane fuel and 13 to 14 psi it was rated 800+hp but that is on the flywheel so i am waiting for the engine to arrive and to install it then dyno test the car tire HP ratings i am hoping for 650hp or a bit less i hope it dose not disappoint me lool.
|
04-14-2010, 05:00 PM | #14 |
Drives: 2010 ss/rs camaro Join Date: Apr 2010
Location: kuwait
Posts: 18
|
well in the invoice it shows that they are L92 heads am not sure if that means LS2 or LS3
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
g5cr cai system anybody install or looking at one "pics" | camarossrs2150 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 41 | 07-14-2011 08:26 PM |
AirAid Cold Air Intake anyone? | FLYNNZL1 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 12 | 01-01-2010 09:05 PM |
Why i think you cant do a Dyno in the same day | 2SSRS@Gen5diy | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 123 | 10-22-2009 07:37 PM |
Camaro ls3 news...true or false? | Dark Knight | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 74 | 06-05-2008 05:29 PM |
Axial Vector Engine | Mr. Wyndham | General Automotive + Other Cars Discussion | 6 | 06-20-2007 04:00 PM |