Which BAP do you recommend? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jayno20 · 04-11-2016, 06:11 PM

I am in the market for one and I am wondering which one is the most reliable, easiest to setup, etc.

jayno20 · 04-11-2016, 06:50 PM

Quote:

Originally Posted by DrkPhx

I can't speak for the other brand, but I like the JMS unit that is activated by the throttle position because you can adjust the voltage and ramp in rate to prevent pressure spikes. It's a pretty easy install imo.

What has to be run to the front of the vehicle in that units install?

DrkPhx · 04-11-2016, 08:20 PM

Nothing to the engine bay, just a pigtail harness to the tps connector on the gas pedal. There's a good write up in this section.

jayno20 · 04-11-2016, 08:33 PM

Quote:

Originally Posted by DrkPhx

Nothing to the engine bay, just a pigtail harness to the tps connector on the gas pedal. There's a good write up in this section.

Interesting. You have a link for that install? I don't see it.

rjs2010SS · 04-12-2016, 05:21 AM

I have the JMS works great. Clean install in the trunk.

jayno20 · 04-12-2016, 01:16 PM

I like the idea of not messing with anything in the engine bay. I'll probably get this unit.

rjs2010SS · 04-12-2016, 02:10 PM

Quote:

Originally Posted by jayno20

I like the idea of not messing with anything in the engine bay. I'll probably get this unit.

Talk to Ted Jannetty, I bought mine from him.

14ZL1M6 · 04-12-2016, 02:32 PM

Quote:

Originally Posted by jayno20

Interesting. You have a link for that install? I don't see it.

Here is the link....

http://www.camaro5.com/forums/showthread.php?t=443684

jayno20 · 04-12-2016, 02:35 PM

Great write up!

Dega Man · 04-13-2016, 07:18 AM

I have not had any problem with the Kenne Bell on either car nor heard of any, it has been a rock solid performer, just another option seem like the JMS is a good performer from the replies coming in as well.

04-11-2016, 06:11 PM	#1
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	Which BAP do you recommend? I am in the market for one and I am wondering which one is the most reliable, easiest to setup, etc.

04-12-2016, 05:21 AM	#5
rjs2010SS Drives: 2013 AGM ZL1 BELLA* Join Date: Jan 2011 Location: VA Posts: 370	I have the JMS works great. Clean install in the trunk. __________________ Roto Fab CAI, Roto Fab Big Gulp, Jokerz ported SC/Snout, LS7 TB ported, ATI Balancer, 28%(10") Lower Pulley, 2" Headers, No Cats,Forza 3way, E85 Flex Fuel sensor , ID850 injectors,, BTR Stage 3, Ron Davis HX, Mighty Mouse CC, APR Splitter, Aero Sports Concepts Splitter Kit, Showstoppers CarbonFiber wicker bill, MRR Wheels. 720rwhp/690tq on 93, 762rwhp E85. 2013 AGM ZL1 Bella* 2010 MGM Toyota Tacoma 2010 CGM SS (Traded) 1996 Black SS (Sold)

04-11-2016, 08:20 PM	#3
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	Nothing to the engine bay, just a pigtail harness to the tps connector on the gas pedal. There's a good write up in this section.

04-12-2016, 01:16 PM	#6
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	I like the idea of not messing with anything in the engine bay. I'll probably get this unit.

04-12-2016, 02:35 PM	#9
jayno20 Go fast, please. Drives: 2019 Corvette ZR1 Join Date: May 2014 Location: Pittsburgh, PA Posts: 2,471 View My Garage	Great write up!

04-13-2016, 07:18 AM	#10
Dega Man Drives: ZL1 Join Date: Oct 2012 Location: Talladega Posts: 631	I have not had any problem with the Kenne Bell on either car nor heard of any, it has been a rock solid performer, just another option seem like the JMS is a good performer from the replies coming in as well.