10-07-2012, 09:00 AM | #1 |
|
Welds, Slicks and Skinnies ready to go!
I got my wheels, bigs and littles ready to have some fun after we install the G-froce 9" in a couple of weeks. They handle great at speed, in a straight line that is. I can't wait to get it back on the track! Now I just got to re-learn how to launch this beast at 678 RWHP and 671 pounds of torque, any suggestions?
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
10-07-2012, 09:20 AM | #2 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
looks mean
are those hoosier drag radials?
__________________
|
10-07-2012, 09:31 AM | #3 |
|
No they are Hoosier 28" slicks I cleaned off the painted on letters
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
10-07-2012, 09:55 AM | #4 |
chevy pride
|
lookin good when u gonna try them out
__________________
check out ky speeds fb page https://www.facebook.com/kyspeed |
10-07-2012, 09:56 AM | #5 |
Drives: 2010 RS 2 SS Join Date: Aug 2009
Location: FLEMING COUNTY , KY
Posts: 415
|
just put an auto trans in it & hold it straight . lol looks good jim . cant wait to see it in action soon . when are we hitting up the track ? i cant wait to try them .
__________________
|
10-07-2012, 09:58 AM | #6 |
|
I gave it a little test yesterday and Bobby is coming up today I hope and we are going to test it out overall if the rain will hold off.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
10-07-2012, 10:00 AM | #7 |
Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010
Location: South Florida
Posts: 1,237
|
Looks Great!!!
__________________
LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi |
10-07-2012, 10:00 AM | #8 |
|
Probably not until I get the 9" inch installed so it will be st the shootout or later. Just remember none of those monster burnouts on my nice slicks LOL.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
10-07-2012, 10:05 AM | #9 | |
COTW [4/23/12]
Drives: Camaro Of The Week. Join Date: Aug 2011
Location: San Diego, CA
Posts: 2,088
|
question..
1. rims size and prize? 2. tire size and prize? 3. where to buy ? nice car btw.
__________________
Quote:
2010 Camaro V6 1LT | Kooks Catback Exhaust + MBRP exhaust tips | TF3 Stripes | GM Transformers Emblem and Door Sill | Stillen splitter | GMX rear diffuser | K&N CAI | Pulstar iridium spark plugs. | Gm High Wing Spoiler | BBK LT Headers | BMR 4 Point Strut Bar | BMR 1" Lowering Springs | ZL1 Side Skirt | Black Ice-olator | Trifecta Tune | My Build Thread |
|
10-07-2012, 10:18 AM | #10 |
Most hated in NM....
Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011
Location: New Mexico
Posts: 2,904
|
your taking all the fun out of it
__________________
|
10-07-2012, 12:09 PM | #11 |
|
OH, you just don't know "1 BAD RS 2 SS" he doesn't just do big burnouts, he does like 180 mph monster burnouts. Anybody that can sign "1 BAD RS 2 SS" in half of the rubber of one of his tires left over a burnout in 6" letters is a little hard on tires. LOL
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
10-07-2012, 12:39 PM | #12 | |
|
Quote:
The wheels are Weld Wheels The front wheels are 17" x 5" Weld part number 71Hy7050N22A and the backs are 17" x 10" Weld part number 71Hy7100N72A The front tires are M&H Racemaster and are 17" tires, 4.5" wide and 28" tall bias ply DOT Certified. The back tires are Hoosier bias ply slicks and are 17" tires 10" wide 28" tall I PMed you on the other questions.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
|
10-07-2012, 01:48 PM | #13 | |
Drives: 2010 RS 2 SS Join Date: Aug 2009
Location: FLEMING COUNTY , KY
Posts: 415
|
Quote:
i have no idea what your talking about . if you wern't there it didn't happen .
__________________
Last edited by 1 BAD RS 2 SS; 10-07-2012 at 02:02 PM. |
|
10-07-2012, 02:01 PM | #14 |
|
monster burnouts
__________________
Jannetty Racing JRE Street Package
|
|
|
Thread Tools | |
|
|