You are browsing camaro5 
 |
|
04-01-2016, 08:13 AM
|
#16003 |
|
Pcacndy
|
I drove her to work today, she's a durty gurl and I'm hoping the rain stops later, or rinses her off a bit...
|
|
|
04-01-2016, 01:17 PM
|
#16004 |
 Drives: 2012 2SS/RS Vert M6 Join Date: Jun 2014
Location: South East, PA
Posts: 117
|
Last night, I pulled off my nose. It has enough scratches on it I figured I would repaint it. Debated whether to replace it or upgrade to a zl1 or other but decided I'm happy with the SS look. Just need it to look good. So I pulled her off...
  Only to find/be disappointed with rust developing on the bumper support bracket   So I proceeded to grind it all down with a cutting wheel to bare metal since it was bubbling, then sprayed self etching primer, sanded, and finally painted with some paint I had laying around which is almost a perfect match. Pic looks blotchy but that is only because I pulled it out and there is a bush casting a shadow to the left you can't see....  Now, onto my real project of restoring the nose.... to which after I may also jump on the xpel bandwagon and put a clear bra or maybe wrap the front clip.... |
|
|
|
04-01-2016, 01:40 PM
|
#16005 | |
|
El Duderino
|
Quote:
__________________
 I bowl. Drive around. The occasional acid flashback. |
|
|
|
|
04-01-2016, 02:52 PM
|
#16006 |
 Drives: 2011 camaro ss Join Date: May 2014
Location: Houston
Posts: 36
|
Installed a cam, dod delete, and tune
 
|
|
|
|
04-01-2016, 02:54 PM
|
#16007 |
|
Destroyed by flooding
Drives: Wife's car Join Date: Mar 2014
Location: Louisiana
Posts: 4,673
|
Went fishing!
__________________
 |
|
|
|
04-01-2016, 04:05 PM
|
#16008 |
 Drives: 2014 1LT Summit White Join Date: Jul 2014
Location: South Florida
Posts: 73
|
Big Worm tail light and side marker tint
|
|
|
|
04-01-2016, 04:25 PM
|
#16009 |
  
Drives: 2012 SS/RS MN6 Join Date: Mar 2016
Location: Covington Ga
Posts: 783
|
Carbon Fiber Airaid went on today.
  
|
|
|
|
04-02-2016, 12:08 AM
|
#16010 |
         
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
added a 2016 Black rear bowtie. it does fit the 5th gen. they are same size.
 
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
|
|
|
04-02-2016, 07:48 AM
|
#16011 |
Drives: 2014 Z28 Join Date: Apr 2015
Location: San Bernardino, Ca
Posts: 187
|
I have a 2014 Z/28
one of 440 built keeping it stock |
|
|
|
04-02-2016, 08:07 AM
|
#16012 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: NH
Posts: 96
|
Changed out my taillight bezels to flat black. SS and bowtie on order from River City to match flat black theme....
__________________
2010 Camaro SS Inferno Orange 6-Speed . Edelbrock E Force Supercharger, Volant Cold Air Intake, Magnaflow Exhaust, River City Creations Emblems, Oracle ghosted LED markers, SLP faded gills, ...531 rwhp, 490 rwtq
|
|
|
|
04-02-2016, 02:55 PM
|
#16013 |
Drives: 2010 ss/rs Join Date: Feb 2016
Location: southern colorado
Posts: 91
|
put on some taylor 409 wires, and a set of ngk TR6IX plugs. I'm not sure if the stock parts were bad or it really likes the new additions, but it idles and pulls way smoother now. ETA: found the problem one of the factory plugs had a broken off tip.
 
__________________
2010 2ss/rs ls3 dynatech longtubes/exhaust, CAI intake, mgw short throw, pfadt coils, ds i1000 tuned by dynosteve, taylor 409 race wires, elite catch can, bfg comp 2 tires,
Last edited by CO2010ss; 04-03-2016 at 09:06 PM. |
|
|
|
04-02-2016, 03:02 PM
|
#16014 |
|
Drives: 2012 SS/RS MN6 Join Date: Mar 2016
Location: Covington Ga
Posts: 783
|
Stainless Works retro chamber cat back today.
|
|
|
|
04-02-2016, 09:59 PM
|
#16015 |
 Drives: 2010 Camaro SS Join Date: Aug 2014
Location: California
Posts: 3
|
Just gotta touch up along the K&N and she is done.
|
|
|
|
04-03-2016, 12:33 PM
|
#16016 |
|
Vampyr ZL1
Drives: Inferno orange 2013 ZL1 Join Date: Mar 2016
Location: upstate South Carolina
Posts: 68
|
So Dante got some black out treatment today. Plastidip style.
 Still have to do the RS badge (have not figured out how to remove it yet)   could be a little cleaner, but that will be next time I do it.  OK so do I do the tail light trim, remove the outer ring around the bow tie and RS to reveal the chrome, or leave it as is? OK this is better.   
Last edited by VampyrRS; 04-03-2016 at 05:41 PM. |
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
| Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS | Info@PeddersUSA.com | USA - Texas | 39 | 02-01-2010 12:48 PM |
| Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |
