Halltech CAI, OBX LTs, and ETMC Tune Results - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

navyblueSS · 12-02-2010, 10:30 PM

Got my tune done today by East Texas Muscle Cars. Car made 422rwhp and 424rwtq. Only mods are Halltech CAI, OBX LTs, and Magnaflow 3in. catback. Thanks to the guys at ETMC for the awesome tune.

klatterblast · 12-02-2010, 11:30 PM

congrats and wow thats almost unbelievable !

Bad70supreme · 12-03-2010, 07:47 AM

Nice! Those are going to be my first mods too!

96/10SS · 12-03-2010, 08:19 AM

nice!

Prochargedchevyi · 12-03-2010, 09:11 AM

Nice.....add a cam and you'll be darn close to 500rwhp.

caverman · 12-03-2010, 09:20 AM

Nice numbers.....I have about the same except for 1 3/4" and mine was 411. I'm sure my headers account for a few HP but not that many. Many factors can make that difference though. Mine was done in early September when weather around is still hot.

Congrats....now get out to the track and see what ET you can get.

thesnoopster · 12-03-2010, 09:30 AM

Those some nice number there! Congrats !!

navyblueSS · 12-03-2010, 09:51 PM

Quote:

Originally Posted by Prochargedchevyi

Nice.....add a cam and you'll be darn close to 500rwhp.

Thanks, a cam is the next thing on my list.

navyblueSS · 12-03-2010, 10:00 PM

Quote:

Originally Posted by caverman

Nice numbers.....I have about the same except for 1 3/4" and mine was 411. I'm sure my headers account for a few HP but not that many. Many factors can make that difference though. Mine was done in early September when weather around is still hot.

Congrats....now get out to the track and see what ET you can get.

Thanks, i have been trying to resist the urge to take this one to the track. But with the 02 in the shop getting a 402 stroker built for it I my have to run it at least once.

Fraxum · 12-03-2010, 10:41 PM

Quote:

Originally Posted by navyblueSS

Got my tune done today by East Texas Muscle Cars. Car made 422rwhp and 424rwtq. Only mods are Halltech CAI, OBX LTs, and Magnaflow 3in. catback. Thanks to the guys at ETMC for the awesome tune.

Nice numbers! What Dyno was that? I assume you used the OBX straight pipes? if those pipes give the same numbers as high flow cats, then maybe is the 3 inch catback helping out? Did you eliminate the 2 1/2 in. part of the catback? Many say the cat-back does not help.

Even without the cam you can go 5.0 hunting.

CamaroCowboy · 12-03-2010, 10:42 PM

I'm currently waiting for a 5.0 to try me.........

Fraxum · 12-03-2010, 10:49 PM

Quote:

Originally Posted by CamaroCowboy

I'm currently waiting for a 5.0 to try me.........

Your sig is funny. But you may be provoking the natives.

CamaroCowboy · 12-03-2010, 10:52 PM

I know. I have a thread started for when I get pics and video tomorrow. Just wait till they find out I have a complete Kooks system but with OBX headers....

wbt · 12-04-2010, 01:50 AM

Quote:

Originally Posted by CamaroCowboy

I'm currently waiting for a 5.0 to try me.........

Bring it on. I will be at SAR on 12/4 for Midnight Madness.

12-02-2010, 10:30 PM	#1
navyblueSS Drives: 2002 Camaro SS Join Date: Jul 2009 Location: Quitman, LA Posts: 609	Halltech CAI, OBX LTs, and ETMC Tune Results Got my tune done today by East Texas Muscle Cars. Car made 422rwhp and 424rwtq. Only mods are Halltech CAI, OBX LTs, and Magnaflow 3in. catback. Thanks to the guys at ETMC for the awesome tune. __________________ 2015 1LE - CAI intake, TSP longtubes, NPP, Futral Motorsports tuned, BMR 1"lowering springs, BMR trailing arms

12-02-2010, 11:30 PM	#2
klatterblast Drives: 2010 camaro 2ssrs blk. Join Date: Oct 2009 Location: walker la. Posts: 1,732 View My Garage	congrats and wow thats almost unbelievable ! __________________ 2010 Hennessey HPE650 2SSRS Blk/Blk Magnuson TVS2300,ported heads,cam,Hotchkis suspension. Weld 17”s, Mickey Thompson’s.

12-03-2010, 09:11 AM	#5
Prochargedchevyi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2010 Location: Castle Rock, Colorado Posts: 153	Nice.....add a cam and you'll be darn close to 500rwhp. __________________ "This house is protected by the good Lord and a gun. You'll meet both if you show up uninvited."

12-03-2010, 09:20 AM	#6
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Nice numbers.....I have about the same except for 1 3/4" and mine was 411. I'm sure my headers account for a few HP but not that many. Many factors can make that difference though. Mine was done in early September when weather around is still hot. Congrats....now get out to the track and see what ET you can get. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

12-03-2010, 09:30 AM	#7
thesnoopster Drives: '17 Fifty SS - '18 Traverse Redline Join Date: Jul 2009 Location: Northern Virginia Posts: 3,616	Those some nice number there! Congrats !! __________________ 2017 Camaro SS -"FIFTY" Mods: "93 Octane"

12-03-2010, 07:47 AM	#3
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	Nice! Those are going to be my first mods too!

12-03-2010, 08:19 AM	#4
96/10SS Drives: 2010 2SS Orange w/ Grey stripes Join Date: Jul 2010 Location: SFL Posts: 372	nice!

12-03-2010, 10:42 PM	#11
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	I'm currently waiting for a 5.0 to try me......... __________________ Texas speed LT Headers and High Flow Cats, Magnaflow 3 inch cat-back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor, Custom Grill, Amber AAC Headlight and Fog Light Halo, Amber footwell Lighting, Amber under hood lighting, RK Sport Ram Air /Heat Extractor Hood and ADM Racing Scoop. 447.9 RWHP 428 TQ My car is exactly that, No one has to like it but me!

12-03-2010, 10:52 PM	#13
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	I know. I have a thread started for when I get pics and video tomorrow. Just wait till they find out I have a complete Kooks system but with OBX headers.... __________________ Texas speed LT Headers and High Flow Cats, Magnaflow 3 inch cat-back Exhaust, SNL V2 Comp CAM, Texas Speed Underdrive Pully, G5CR CAI, Hurst Short Throw Shifter, JetFlo Mass Air Sensor, Custom Grill, Amber AAC Headlight and Fog Light Halo, Amber footwell Lighting, Amber under hood lighting, RK Sport Ram Air /Heat Extractor Hood and ADM Racing Scoop. 447.9 RWHP 428 TQ My car is exactly that, No one has to like it but me!