From MexiFlush to GringoFlush - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Denis · 11-26-2013, 08:15 AM

yea, either raise it a bit or dial in a little more camber and you should be good.

looks mean

LC · 11-26-2013, 08:48 AM

Quote:

Originally Posted by ss04flores

those wheels looks awesome

Thanks mate

Quote:

Originally Posted by the rich dude

so do you have more pics at this new ride height? like to see some side shots, front, rear.

what exhaust is that?

Attached a new pic, the exhaust was made locally with kooks parts, the tips are made by Sirrosh

Quote:

Originally Posted by LIM3

killer stance

Thanks

Quote:

Originally Posted by the rich dude

would just a little more camber keep your wheels from rubbing the fenders??

The thing is getting a 50/50 between the stance and the rubbing because I added a .175" spacer to bring the tire out.

Right now the tire is at -0.5 camber and with the new height things are better, still rubs but only on harsh "jumps", might as well solve it with a little adjustment on the coil knobs.

Quote:

Originally Posted by RacnJsn95

exactly

Quote:

Originally Posted by Denis

yea, either raise it a bit or dial in a little more camber and you should be good.

looks mean

Thanks, its raised now.

here it is

JorgeSS · 11-26-2013, 08:57 AM

I really enjoy seeing that style of rims on the camaro

Denis · 11-26-2013, 09:10 AM

Quote:

Originally Posted by LC

Thanks, its raised now.

here it is

Looks killer

Jay_LHD3 · 11-26-2013, 09:19 AM

Awesome ride. 22s with the step lip is the perfect look for this car!

Jay'SS Ride · 11-26-2013, 12:23 PM

Quote:

Originally Posted by Jay_LHD3

Awesome ride. 22s with the step lip is the perfect look for this car!

the rich dude · 11-26-2013, 02:23 PM

that is the exact same ride height I'd like to achieve!!! Looks great!! What headers do you have? high flow cats?

do you get any rubbing in the front at that ride height?

and stop being so cheap with the pics!!!

it won't cost you anymore to throw a few up

ModBargains.com · 11-26-2013, 02:28 PM

That's not mexi-flush, that's just getting close to a flush look for sure, but it looks good, I'd leave it if you're not too annoyed by it.

LC · 11-26-2013, 04:51 PM

Quote:

Originally Posted by JorgeSS

I really enjoy seeing that style of rims on the camaro

Quote:

Originally Posted by Denis

Looks killer

Quote:

Originally Posted by Jay_LHD3

Awesome ride. 22s with the step lip is the perfect look for this car!

Quote:

Originally Posted by Jay'SS Ride

Cheers

Quote:

Originally Posted by the rich dude

that is the exact same ride height I'd like to achieve!!! Looks great!! What headers do you have? high flow cats?

do you get any rubbing in the front at that ride height?

and stop being so cheap with the pics!!!

it won't cost you anymore to throw a few up

Custom headers made here locally, but they should sit as any other header, no cats, the exhaust has a pair of kooks bullets in the middle, the collectors and the bullets are squared now.

Front is not rubbing at all while going straight, if I turn and hit a bump at the same time I'm pretty sure the fenders will get "modified" by the tire.

Also Front is at -.75 camber, I have not figured out why but it pulls a lot if we straight them up, may ask in the suspension forum later on.

I hate posting pictures because I can't really make the car justice with my lack of photo skills.

Quote:

Originally Posted by ModBargains.com

That's not mexi-flush, that's just getting close to a flush look for sure, but it looks good, I'd leave it if you're not too annoyed by it.

This was mexi-flush!

ModBargains.com · 11-26-2013, 04:53 PM

Quote:

Originally Posted by LC

This was mexi-flush!

Oh holy crap. Yeah that's mexi-flush, lol.

WONSS · 11-26-2013, 08:07 PM

LC....with the stance your driving at now.. is there still more room to lower the car?...like are the coilovers almost bottomed out? Also did you do anything to the coilovers? There was a member who installed these on a previous thread which he stated the car doesnt go low with those particular coilovers, he still had a gap in the fenders all the way down.. From the looks of your ride these cars slam with these coilovers.....

LC · 11-26-2013, 08:34 PM

At the first picture of the rear wheel, the nuts were about 4 threads from each other, so not a lot more, but still some.

Once I dial the car to height and ride I will measure everything and post pics of the coils

I left the car at the paint shop today for Detective Juanito's pleasure.

IPT · 11-26-2013, 09:07 PM

dude, car looks sick

.

revived · 11-27-2013, 12:52 AM

You got some nice wheels there, I remember seeing a past thread of the damaged one... yikes im guessing you got a new one?

Looks great with the drop,

11-26-2013, 08:15 AM	#15
Denis Drives: 2010 SS Join Date: May 2012 Location: Yorktown Heights, NY Posts: 7,695 View My Garage	yea, either raise it a bit or dial in a little more camber and you should be good. looks mean __________________

11-26-2013, 08:57 AM	#17
JorgeSS Mayhem SS Drives: 2010 2SS/RS L99 SW/IOM Join Date: Nov 2009 Location: ROMA, TX Posts: 949	I really enjoy seeing that style of rims on the camaro __________________ Mayhem SS - 6.2, Roto-Fab CAI, Pacesetter Headers/Magnaflow X-pipe, Built by TMS, Tuned by File La Muerte Z71 - Stock 5.3 Tuned by File

11-26-2013, 08:34 PM	#26
LC ou mai gad Drives: SW 2SS x2 Join Date: Feb 2010 Location: MX Posts: 643	At the first picture of the rear wheel, the nuts were about 4 threads from each other, so not a lot more, but still some. Once I dial the car to height and ride I will measure everything and post pics of the coils I left the car at the paint shop today for Detective Juanito's pleasure. __________________

11-26-2013, 09:07 PM	#27
IPT Drives: '02 Trailblazer, '12 Camaro 2SS/RS Join Date: Jun 2012 Location: AK Posts: 819	dude, car looks sick . __________________

11-27-2013, 12:52 AM	#28
revived Vrrrm. Drives: 2011 2SS/RS LS3 Join Date: Jun 2013 Location: MA Posts: 1,495	You got some nice wheels there, I remember seeing a past thread of the damaged one... yikes im guessing you got a new one? Looks great with the drop, __________________

11-26-2013, 09:19 AM	#19
Jay_LHD3 Drives: 2019 F150 RCSB Abyss FX4 Join Date: Aug 2009 Location: Huntsville, AL Posts: 2,277	Awesome ride. 22s with the step lip is the perfect look for this car!

11-26-2013, 02:23 PM	#21
the rich dude Drives: Getting 2010 Camaro Join Date: Jul 2008 Location: Vancouver Posts: 1,149	that is the exact same ride height I'd like to achieve!!! Looks great!! What headers do you have? high flow cats? do you get any rubbing in the front at that ride height? and stop being so cheap with the pics!!! it won't cost you anymore to throw a few up

11-26-2013, 02:28 PM	#22
ModBargains.com Drives: Widebody 2013 Mustang GT Join Date: Feb 2012 Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631 Posts: 2,848	That's not mexi-flush, that's just getting close to a flush look for sure, but it looks good, I'd leave it if you're not too annoyed by it.

11-26-2013, 08:07 PM	#25
WONSS Drives: 2012 1SS/RS M6 SUMMITT WHITE Join Date: Jul 2012 Location: MIAMI, FL Posts: 406 View My Garage	LC....with the stance your driving at now.. is there still more room to lower the car?...like are the coilovers almost bottomed out? Also did you do anything to the coilovers? There was a member who installed these on a previous thread which he stated the car doesnt go low with those particular coilovers, he still had a gap in the fenders all the way down.. From the looks of your ride these cars slam with these coilovers.....