05-31-2014, 05:46 PM | #1 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
******** 12" Sub Enclosure Install
Anyone have any tips/instructions on how to install the ******** box into the drivers side location? I was searching online and found out that ******** emails a link to the installation instructions, but since I didn't buy it directly from them (bought on Craigslist) I don't think I'll be able to get that link. Appreciate the help.
|
05-31-2014, 05:53 PM | #2 |
Drives: 2012 2SS/RS Join Date: Apr 2014
Location: Fort Wayne
Posts: 560
|
I just finished up the install
It is very tricky getting it in there but here is what I did Make sure you have the carpet backing cut Make sure your carpet floor is out Put the box with the smaller end in first and work it back and then slide the bigger part back..Just keep working with it, it will go eventually
__________________
Flowmaster American Thunder Exhaust
|
05-31-2014, 06:12 PM | #3 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Thanks tim, I remember seeing somewhere online a guy that had a picture of exactly how much to cut the carpet backing on the side but I can't find it. Did you have to cut the floor carpet as well or were u able to slide it back under the box?
|
05-31-2014, 06:48 PM | #4 |
Drives: Black 2011 2SS/RS / Black 2013 ZL1 Join Date: Feb 2012
Location: El Paso, Texas
Posts: 314
|
Here you go.
Sent from my SCH-I535 using Tapatalk |
05-31-2014, 06:49 PM | #5 |
Drives: Black 2011 2SS/RS / Black 2013 ZL1 Join Date: Feb 2012
Location: El Paso, Texas
Posts: 314
|
|
05-31-2014, 07:08 PM | #6 |
Drives: Black 2011 2SS/RS / Black 2013 ZL1 Join Date: Feb 2012
Location: El Paso, Texas
Posts: 314
|
Watch "Door Speaker Install.m4v" on YouTube
Door Speaker Install.m4v: http://youtu.be/Rmtj81AvKw4 Watch "How To Replace Front Door Speakers In A Chevrolet…" on YouTube How To Replace Front Door Speakers In A Chevrolet…: http://youtu.be/8_-_BF98p4Q These may help. |
05-31-2014, 07:28 PM | #7 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Hey thanks ZeuSS that's the one I was talking about. I found some other member's post that said they did it by taking the whole piece of carpet out of the trunk so I tried it that way and I got it to fit (see pic). I think I'll go ahead cut the carpet and put it back in there. Looks like a cleaner install to me.
Last edited by 760bowtie; 08-04-2014 at 06:05 PM. |
06-01-2014, 01:00 AM | #8 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
06-01-2014, 01:17 AM | #9 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Did you cut that piece for the hump from your carpet to slide it under the box?
|
06-01-2014, 01:21 AM | #10 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
its glued to the carpet. i just ripped it off.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
06-01-2014, 01:24 AM | #11 |
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Kool
|
|
|
|
|