GM bulletin: HVAC system reprogram / rear spoiler repair / engine harness inspection - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

imstr8upg · 09-28-2009, 12:46 PM

Quote:

Originally Posted by z28mass

Wow this is happening to other people than just me. I also got this message stating "open passenger window and then close it again". I did and message went away. On another occasion I opened my trunk and heard like a loose nut going down the trunk. I was surprise that happened and figure it was an extra nut that stayed in there loose.

Have 2SS/RS IOM 21' rims, sunroof, manual. Baby cost too much to have this happening especially when it's brand new. Hope it doesn't fall apart in another Month.

About a month ago on a cruiz my pass side window would not roll back up. It only happen for 1 day, and I have not had the problem again. But I'm just worried that it will happen at a bad time.. like rain.

Also have the trunk problem.. lame.

-Alex

rays · 09-28-2009, 03:11 PM

Quote:

Originally Posted by MARINE1991

I just brought my camaro SS in to the dealership service and they told me no bulletin on my car...

am I missing somthing??? my VIN 39678.. Was it on vins before mine???

You missed it by 3030 cars. Only up to 36648.

Mines getting done on Wednesday. Vin 17537

MARINE1991 · 09-28-2009, 03:48 PM

OK Thanks, I guess I read it wrong..

Bonemaro · 09-28-2009, 04:27 PM

Quote:

Originally Posted by imstr8upg

About a month ago on a cruiz my pass side window would not roll back up. It only happen for 1 day, and I have not had the problem again. But I'm just worried that it will happen at a bad time.. like rain.

Also have the trunk problem.. lame.

-Alex

I had a problem with the same window; it wouldn't index. DIC said to open window then close again. Window wouldn't budge, and i couldn't close the door as it was stuck in the up position. So i hit reset, and restarted the car thinking of it as rebooting a cpu. By the third restart/try it finally worked.

SOMANYDECISIONS · 09-29-2009, 09:28 AM

When I had my windows done the guy did my spoiler as well; said all the Camaro's he had in at that point had the same issue, one was so loose the nut had fallen completely off; my vin is 28701.

Supermans · 10-02-2009, 04:14 AM

Quote:

Originally Posted by aldaran

What's your VIN production number? As of the end of July, 32k Camaros have been produced since March.

My VIN is 2G1FS1EWXA9122517 and my bolts were loose upon delivery and later came loose again about 1000 miles later. I have to take it in for this, they still have to apply the loctite even if it doesn't fall under the bulletins vin range..

MasterZ · 10-06-2009, 09:05 PM

Is there a printable version of this bulletin? I am bringing the car in tomorrow and want them to take care of this while it is there.

When I made the appointment they had no record of this when I asked about it. So I was going to print it out and bring it in.

fireresq157 · 10-15-2009, 08:30 AM

For those who have had their cars for a while double check your spoiler . I checked mine initially when the issue was brought up and it was tight. Yesterday when I was washing the car I noticed it went down when I went over it. I pulled the rubber plugs on the left side and one nut was completely off and the other about to fall off. I know their is a service bulletin on it but I had figured mine did not have the Issue since the few times I checked till now it had been fine. Luckily it had not damaged the paint from vibration yet. Anyhow just a heads up to check again.

CWI · 10-15-2009, 08:33 AM

Quote:

Originally Posted by fireresq157

For those who have had their cars for a while double check your spoiler . I checked mine initially when the issue was brought up and it was tight. Yesterday when I was washing the car I noticed it went down when I went over it. I pulled the rubber plugs on the left side and one nut was completely off and the other about to fall off. I know their is a service bulletin on it but I had figured mine did not have the Issue since the few times I checked till now it had been fine. Luckily it had not damaged the paint from vibration yet. Anyhow just a heads up to check again.

There have been previous threads about this. I don't remember the VIN when they found the problem was an improperly claibrated torque wrench. What's your VIN?

ZZTOM · 10-15-2009, 08:33 AM

Had the same thing happen to me last week. vin 2083

fireresq157 · 10-15-2009, 08:41 AM

Quote:

Originally Posted by CWIweldace

There have been previous threads about this. I don't remember the VIN when they found the problem was an improperly claibrated torque wrench. What's your VIN?

of the top of my head I think its 16793

bluecamaroguy · 11-01-2009, 11:22 PM

I saw this question asked a lot. But no answer.

How do we get loose screws out of the trunk after they have fallen off!?

FLYNNZL1 · 11-02-2009, 07:51 AM

I had loose spoiler nuts vin#24888

k0jdd · 11-06-2009, 04:57 PM

My HVAC bulletin tale of woe

http://www.camaro5.com/forums/showth...63#post1142563

10-06-2009, 09:05 PM	#49
MasterZ Drives: 2010 Camaro SS/RS Join Date: Sep 2008 Location: Denham Springs, LA Posts: 705	Is there a printable version of this bulletin? I am bringing the car in tomorrow and want them to take care of this while it is there. When I made the appointment they had no record of this when I asked about it. So I was going to print it out and bring it in. __________________ 2014 C7 Z51~ M7 custom paint, Mods soon to come, researching at the moment.

10-15-2009, 08:30 AM	#50
fireresq157 Drives: 1997 SS & 2010 2SS/RS Join Date: Aug 2006 Location: South Florida Posts: 1,027	Double check rear spoiler For those who have had their cars for a while double check your spoiler . I checked mine initially when the issue was brought up and it was tight. Yesterday when I was washing the car I noticed it went down when I went over it. I pulled the rubber plugs on the left side and one nut was completely off and the other about to fall off. I know their is a service bulletin on it but I had figured mine did not have the Issue since the few times I checked till now it had been fine. Luckily it had not damaged the paint from vibration yet. Anyhow just a heads up to check again.

11-02-2009, 07:51 AM	#55
FLYNNZL1 Wicked ZL1 Drives: 2017 ZL1 A10 HBM Join Date: Apr 2009 Location: Tucson, AZ Posts: 3,175 View My Garage	I had loose spoiler nuts vin#24888 __________________ 2017 Hyper Blue Metallic ZL1 A10/CF Hood Insert/PDR/NAV MODS: Rotofab CAI/V-MAX CNC Ported Throttle Body/Clear Bra/LED Reverse Light/Rock Guards/Lift Pads/Darkened Tail Lights/Ghost-Tinted LED Side Markers/Darkened 3rd Brake Light

11-06-2009, 04:57 PM	#56
k0jdd Drives: Chevrolet Camaro / Colorado Join Date: Apr 2009 Location: Minnesota Posts: 283	My HVAC bulletin tale of woe http://www.camaro5.com/forums/showth...63#post1142563 __________________ 2021 3LT RS V6 Automatic / Red Hot w/Adrenaline Red / Sunroof VIN 1G1FD1RS7M0135256 Delivered 6/14/2021 Traded- 2014 2LT V6 Automatic / Red Hot w/Black Leather / 19" Polished Wheels / Sunroof VIN 2G1FC1E31E9202653 Traded - 2010 2LT V6 Manual / Victory Red/Black Leather / 19" Polished Wheels / R6P VIN 2G1FG1EV3A9112601 Sold - 1999 2LT V6 Automatic / Victory Red/Black Leather / 19" Polished Wheels / T-Tops VIN {Still Searching for it...}

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	65	12-14-2022 07:23 AM
LS9 SC old news. Here comes the LSX. 850HP, 840 lb-ft of Torgue	13F20	5th Gen Camaro SS LS LT General Discussions	15	09-22-2008 04:35 PM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 05:29 PM
GM moves closer to HCCI engine production	Scotsman	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	05-16-2008 06:16 PM

09-28-2009, 03:48 PM	#45
MARINE1991 Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009 Location: HOMELESS Posts: 10,010 View My Garage	OK Thanks, I guess I read it wrong..

09-29-2009, 09:28 AM	#47
SOMANYDECISIONS Drives: 08 Duramax Jacked Up, 10 Maro Black Join Date: Oct 2008 Location: Oregon Posts: 86 View My Garage	When I had my windows done the guy did my spoiler as well; said all the Camaro's he had in at that point had the same issue, one was so loose the nut had fallen completely off; my vin is 28701.

10-15-2009, 08:33 AM	#52
ZZTOM Drives: 67 Camaro 350, 2010 2SS Join Date: Apr 2009 Location: Placitas, NM/Carlsbad, CA Posts: 699 View My Garage	Had the same thing happen to me last week. vin 2083

11-01-2009, 11:22 PM	#54
bluecamaroguy Drives: 2010 2LT/RS ABM! Join Date: May 2009 Location: san diego Posts: 254 View My Garage	I saw this question asked a lot. But no answer. How do we get loose screws out of the trunk after they have fallen off!?