02-23-2024, 03:11 PM | #1 |
OE 1LE Splitter (Damaged)
Just testing if there is any interest in the slightly damaged OE splitter from my 2013 1LE.
It is taking up room in my shop and I know these are quite difficult to find. I was going to toss it in the dumpster but I figured I would put it up here in case someone wanted a little project. So, if someone wants to take on a slight repair job to have an OE splitter, please have at it. I removed it because it got damaged when I dodged a deer, but had to go off into the grass shoulder/ditch. That bit of off-road journey damaged the driver side of the splitter. There is heavy scratching on the driver side and a slight bend on the far drivers side. Most of the original mounting clips were broken off and are not included. Shipping will be a bit pricy due to size. If there is any interest, make an offer!
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Mishimoto Oil Cooler, BMR Tunnel Brace, Mishimoto Oil Catch Can, MSD Plug Wires, Mishimoto Radiator and Hoses. |
|
02-23-2024, 08:21 PM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,073
|
What shipping be to 37042?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
02-23-2024, 09:20 PM | #3 |
"Cam Only"
|
I'd be interested. Shipping to 85260?
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
02-26-2024, 11:12 AM | #4 |
Looks to be about $60 on the FedEx calculator.
Says around $45 Honestly, these prices are way cheaper then I expected. I asked my shipping guy at my work about shipping it and he said it would be more like $130... Don't know who is right.
__________________
2013 1SS/1LE
Corsa Extreme cat-back, Speed Engineering LT Headers with black ceramic coating, C7 Z06 Front Brake Upgrade, Mishimoto Oil Cooler, BMR Tunnel Brace, Mishimoto Oil Catch Can, MSD Plug Wires, Mishimoto Radiator and Hoses. |
|
02-27-2024, 09:44 PM | #5 |
"Cam Only"
|
I'll gladly pay for you to ship this to me if it's around that ballpark. Let me know!
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|