Texas Speed Header pics...just arrived - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Stephen12ZL1 · 04-26-2013, 11:49 AM

I plan on installing them tonight. They look good and are not light or thin flanged at all. The welds look good and band clamps are nice. It comes with O2 bungs for the front 02s only as the rear 02s are useless. Here is a pic of the 1 7/8" tubing. We shall see how they fit.

Stephen12ZL1 · 04-26-2013, 11:50 AM

another pic

Muddflap · 04-26-2013, 11:50 AM

I got mine in yesterday but I'm stuck out of town working....

Lethal Z · 04-26-2013, 12:19 PM

Not trying to be a dick...but to me, those welds around the flang look sloppy....

How much did they cost??

hognutz · 04-26-2013, 12:41 PM

1 7/8 or 2"
$509 off road
$779 w cats

Stephen12ZL1 · 04-26-2013, 12:50 PM

Quote:

Originally Posted by Lethal Z

Not trying to be a dick...but to me, those welds around the flang look sloppy....

How much did they cost??

The welds on the outside look a tad sloppy. The inner part which is the part that counts is quite smooth. I need to include a pic of the inner part. I will also post a pic of the Stainless Power Headers later today for comparison. Hognutz posted the price and he is correct.

SamHouseIII · 04-26-2013, 01:16 PM

These things are a work of Art!!

Dznts · 04-26-2013, 03:46 PM

Mine come in today

cybercoaster · 04-26-2013, 04:00 PM

Quote:

Originally Posted by Dznts

Mine come in today

Stephen12ZL1 · 04-26-2013, 06:51 PM

last one

SamHouseIII · 04-26-2013, 07:33 PM

Quote:

Originally Posted by Dznts

Mine come in today

can't wait to hear them!!

AMCBimmer · 04-26-2013, 08:32 PM

Just installed Kooks on my ZL1 and the drivers front pipe hit the driver side engine mount. I had to crush it with a press.

CanadianZL1#992 · 04-26-2013, 08:57 PM

Quote:

Originally Posted by Stephen12ZL1

The welds on the outside look a tad sloppy. The inner part which is the part that counts is quite smooth. I need to include a pic of the inner part. I will also post a pic of the Stainless Power Headers later today for comparison. Hognutz posted the price and he is correct.

Might be a stupid question but aren't all the pipes suppose to be the same length?? I got the KOOKs 1 7/8 and they fit perfectly, no issues whatsoever.

hognutz · 04-26-2013, 11:46 PM

Quote:

Originally Posted by CanadianZL1#992

Might be a stupid question but aren't all the pipes suppose to be the same length?? I got the KOOKs 1 7/8 and they fit perfectly, no issues whatsoever.

they don't have to be. kooks are equal lenght headers. they are also way more money. there are cars making a grip of power with these texas speed headers.

04-26-2013, 11:49 AM	#1
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	Texas Speed Header pics...just arrived I plan on installing them tonight. They look good and are not light or thin flanged at all. The welds look good and band clamps are nice. It comes with O2 bungs for the front 02s only as the rear 02s are useless. Here is a pic of the 1 7/8" tubing. We shall see how they fit. Attached Images __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) Last edited by Stephen12ZL1; 04-26-2013 at 12:04 PM.

04-26-2013, 11:50 AM	#2
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	another pic Attached Images __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

04-26-2013, 12:41 PM	#5
hognutz Drives: 2013 ZL1 Join Date: Oct 2011 Location: tangent or Posts: 2,984	1 7/8 or 2" $509 off road $779 w cats __________________ shopping for 2017+1le or zl1 2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned

04-26-2013, 01:16 PM	#7
SamHouseIII I Carry! Drives: 2013 CRT ZL1 Join Date: Jul 2011 Location: Fletcher, Ok Posts: 2,722	These things are a work of Art!! __________________ I am a Modaholic!! Please Help!! Do Not feed my addicition....See build... http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/

04-26-2013, 03:46 PM	#8
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	Mine come in today __________________

04-26-2013, 11:50 AM	#3
Muddflap Drives: 2010 Camaro SS Join Date: Apr 2013 Location: Longview, Tx Posts: 797	I got mine in yesterday but I'm stuck out of town working....

04-26-2013, 12:19 PM	#4
Lethal Z American Gearhead!! Drives: ZL1 1LE/GT350/Ford RS/Gen 2 Raptor Join Date: Mar 2013 Location: Merica Posts: 433	Not trying to be a dick...but to me, those welds around the flang look sloppy.... How much did they cost??

04-26-2013, 06:51 PM	#10
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	last one Attached Images __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

04-26-2013, 08:32 PM	#12
AMCBimmer Drives: 2002 BMW M5 Join Date: Jun 2011 Location: Aldie, VA Posts: 250	Just installed Kooks on my ZL1 and the drivers front pipe hit the driver side engine mount. I had to crush it with a press. __________________