clutch pedal sticking???? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

trans665 · 06-09-2013, 11:24 AM

i recently installed a night fury cam in my ss.....everything is badass, but when i gun it, by the time i get to third gear my pedal is sticking to the floor.. i have 483 hp to the rear now, so im estimating 550 to the crank, do i need to buy ZL1 parts??? any help?? when i start spraying on a nitrous tune, i dont want this problem.....

06-09-2013, 11:39 AM

Get used it it. Gm hydraulic clutch system is a joke.

IdealG Master cylinder, might help
Lingefelter Pedal Return Spring, might help, might as well buy a zl1 pedal for 60 bucks more.
ZL1 Clutch Pedal, might help
Tick Clutch Line, might help

I am going the ZL1 Pedal, IdealG Master Cylinder, Tick Stainless Line but i am not confident it will help much.

uniqueskillz · 06-09-2013, 12:45 PM

Sounds like its time to buy a street slayer clutch. I think somebody is selling one in the classified section.

trans665 · 06-09-2013, 01:55 PM

what will changing the clutch do???? wont i still have the same problems???

casper sc/1ss/rs · 06-09-2013, 02:05 PM

I dont think your problem is due to to much power, im well over 600rwhp with no issues

slashervrgr · 06-09-2013, 02:05 PM

Yes you will, and as previously stated that's just gm hydraulic systems :P

AngelSpeedFreak · 06-14-2013, 02:08 PM

I have a Mcleod RXT clutch and it still sticks to the floor occasionally. PITA....

Don't think it has anything to do with clutch. More like the master cylinder or maybe the spring would help?

H-E · 06-14-2013, 02:22 PM

We have never had a report of a sticking pedal with a Street Slayer clutch.

06-09-2013, 11:24 AM	#1
trans665 Drives: 2013 2ss Join Date: May 2011 Location: corpus christi Posts: 488	clutch pedal sticking???? i recently installed a night fury cam in my ss.....everything is badass, but when i gun it, by the time i get to third gear my pedal is sticking to the floor.. i have 483 hp to the rear now, so im estimating 550 to the crank, do i need to buy ZL1 parts??? any help?? when i start spraying on a nitrous tune, i dont want this problem..... __________________ 2013 auto ss..full bmr suspension..3800 stall...s475 turbocharger on 16 psi with 150 nitrous outlet plate...,BTR stage 3 turbo cam.....100% Methanol injection....LY6 6.0 iorn block ...

06-09-2013, 11:39 AM	#2
KlugSS Guest Posts: n/a View My Garage	Get used it it. Gm hydraulic clutch system is a joke. IdealG Master cylinder, might help Lingefelter Pedal Return Spring, might help, might as well buy a zl1 pedal for 60 bucks more. ZL1 Clutch Pedal, might help Tick Clutch Line, might help I am going the ZL1 Pedal, IdealG Master Cylinder, Tick Stainless Line but i am not confident it will help much. Last edited by KlugSS; 06-09-2013 at 12:47 PM.

06-09-2013, 01:55 PM	#4
trans665 Drives: 2013 2ss Join Date: May 2011 Location: corpus christi Posts: 488	what will changing the clutch do???? wont i still have the same problems??? __________________ 2013 auto ss..full bmr suspension..3800 stall...s475 turbocharger on 16 psi with 150 nitrous outlet plate...,BTR stage 3 turbo cam.....100% Methanol injection....LY6 6.0 iorn block ...

06-14-2013, 02:08 PM	#7
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	I have a Mcleod RXT clutch and it still sticks to the floor occasionally. PITA.... Don't think it has anything to do with clutch. More like the master cylinder or maybe the spring would help? __________________

06-09-2013, 12:45 PM	#3
uniqueskillz Drives: ETMC built 700+hp Twin Turbo LS3 Join Date: Apr 2010 Location: Killeen, TX Posts: 682	Sounds like its time to buy a street slayer clutch. I think somebody is selling one in the classified section.

06-09-2013, 02:05 PM	#5
casper sc/1ss/rs Drives: 2011 camaro ss vortech supercharged Join Date: Aug 2011 Location: marion VA. Posts: 524 View My Garage	I dont think your problem is due to to much power, im well over 600rwhp with no issues

06-09-2013, 02:05 PM	#6
slashervrgr !!! Drives: 1998 3.8 Camaro Join Date: May 2013 Location: NEPA Posts: 3	Yes you will, and as previously stated that's just gm hydraulic systems :P

06-14-2013, 02:22 PM	#8
H-E Account Suspended Drives: 2010 zr1 Camaro 2011 vert Join Date: Apr 2013 Location: everywhere Posts: 1,121	We have never had a report of a sticking pedal with a Street Slayer clutch.