05-09-2014, 01:38 AM | #1 |
Drives: 2019 ZL1 Join Date: Nov 2009
Location: Lake in the Hills, IL
Posts: 257
|
Added aeroforce gauges and a 2 gauge pillar pod today
very impressed with the aeroforce gauges. high quality and easy instalation. They look great!! im planning on upgrading my pulleys soon and wanted a boost gauge that was very noticible. tell me what ya think? thanks
|
05-09-2014, 01:46 AM | #2 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
It's crooked! LOL! Looks great! I did the single on the column mount becuz they don't have the pillar mount for the vert or I would have had ur setup. Love the gauge though especially the shift light setup!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
05-09-2014, 02:16 AM | #3 |
Drives: 2019 ZL1 Join Date: Nov 2009
Location: Lake in the Hills, IL
Posts: 257
|
yea its a dry run, i was in a hurry and had to go to work. but im ocd over the car they wont be crroked after tomorrow!! LOL
|
05-09-2014, 06:32 AM | #4 | |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
Gauges
Quote:
Bill
__________________
Build Thread: 2018 ZL1 Vert Purchased (Overpar73)
|
|
05-09-2014, 06:58 AM | #5 |
Now just flock the gauge pod and you will be set. Those gauges are great!
http://www.camaro5.com/forums/showthread.php?t=274598 Last edited by Jeff65SS; 05-09-2014 at 07:00 AM. Reason: added link |
|
05-09-2014, 08:14 AM | #6 |
Where did you buy the gauges from with the ZL1 logo on them? That's awesome!
Edit: Nvm I found them. Last edited by Botally Tone; 05-09-2014 at 11:39 AM. |
|
05-09-2014, 08:52 AM | #7 | |
Drives: ZL1 Convertible Join Date: Aug 2012
Location: Chicago, IL
Posts: 484
|
Quote:
I'm suddenly very interested. also, didn't know the 2 gauge setup wouldn't work on the pillar for convertibles. Obviously, didn't think that one through . . . |
|
05-09-2014, 08:39 PM | #8 | |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
Quote:
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
|
05-09-2014, 11:00 PM | #9 |
Reaper Crew
Drives: Blown 2010 Camaro SS Join Date: Aug 2012
Location: Indiana
Posts: 985
|
I have the dual aeroforce gauges too, also went with the SLP steering column gauge
__________________
2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers |
05-11-2014, 11:11 PM | #10 |
Drives: 2019 ZL1 Join Date: Nov 2009
Location: Lake in the Hills, IL
Posts: 257
|
i like the steering column pod. and you got that from slp? im gonig to have to check into that
|
10-05-2014, 10:45 AM | #11 |
COTW 12.15.14
Drives: 2015 Camaro ZL/8 Join Date: Aug 2014
Location: New York
Posts: 304
|
How is the install of the wiring? Is it straight forward? Thanks!
|
10-05-2014, 07:56 PM | #12 |
Drives: '12 SIM ZL1, 1 of 49 Join Date: Sep 2011
Location: Eastern TN
Posts: 459
|
Wiring plugs directly onto the OBDII port. No special wiring needed. I've been running these for over well over two years now.
__________________
Under Hood - Painted strut bar ends w/custom Polished Stainless mounting hardware, E2 CC, RotoFab CAI, ZL1 underhood decal, Amsoil oil, Black billet strut covers, Metco pulleys, intercooler reservoir, JRE 75 RWHP package.
Chassis - Hawk ceramic brake pads, ZL1 wheel decals, Amsoil fluids Interior - A pillar gauge pod w/Aeroforce Interceptor gauges, Polished ZL1 speaker rings, ZL1 mats and console lid, Custom GPS mount Exterior - 3M clear bra, LED driving lights, PIAA Plasma Ion yellow fog lights, Window tint, CF bowties, Technostalgia sequential tail lights |
10-05-2014, 08:33 PM | #13 |
COTW 12.15.14
Drives: 2015 Camaro ZL/8 Join Date: Aug 2014
Location: New York
Posts: 304
|
|
10-05-2014, 08:56 PM | #14 |
Snake Eater
Drives: 2012 AGM ZL1 Join Date: Oct 2011
Location: TN
Posts: 2,737
|
Im interested in these gauges, anybody know who produces these and also does the alcatra(however you spell it) covering
Sent from my iPad using Tapatalk
__________________
Build Thread: http://www.camaro5.com/forums/showth...95#post8351295
Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/ |
|
|
|
|