Adding Mylink to older gen5 camaro's - Page 70 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2SSRS@Gen5diy · 01-17-2014, 12:30 PM

It helps get the part back in the car, i used a dremal on my trim to mod it, its not hard at all.

Sigmon · 01-17-2014, 12:44 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

It helps get the part back in the car, i used a dremal on my trim to mod it, its not hard at all.

So this will need to be done to mine? What is the part number?

The Stig · 01-17-2014, 12:49 PM

Quote:

Originally Posted by Sigmon

So this will need to be done to mine? What is the part number?

Don't know - you have a automatic. Ofer has only tested on a manual.

DWALEX · 01-17-2014, 12:52 PM

I don't have any issue with this but is a little difficult to put back

Sigmon · 01-17-2014, 12:53 PM

Quote:

Originally Posted by The Stig

Don't know - you have a automatic. Ofer has only tested on a manual.

Ok. So automatics may not be affected. We'll just have to wait and find out.

The Stig · 01-17-2014, 12:58 PM

Quote:

Originally Posted by DWALEX

I don't have any issue with this but is a little difficult to put back

Do you have an automatic or a manual?

Sigmon · 01-17-2014, 01:08 PM

Quote:

Originally Posted by The Stig

Do you have an automatic or a manual?

I have a 2010 automatic all original, for now.

Pagliaro · 01-17-2014, 01:09 PM

Ofer are you testing each unit in your car after programming?

2SSRS@Gen5diy · 01-17-2014, 01:10 PM

Quote:

Originally Posted by DWALEX

I don't have any issue with this but is a little difficult to put back

Quote:

Originally Posted by The Stig

Do you have an automatic or a manual?

I said if you have a after market shifter, i have the Hurst and had to remove part of it to fit and mod the trim, DWALEX you have a auto, your 4 pack trim is now cut from GM.

2SSRS@Gen5diy · 01-17-2014, 01:14 PM

Quote:

Originally Posted by Pagliaro

Ofer are you testing each unit in your car after programming?

Are you nuts, LOL that is far to long a job, but we did send GTpix all the wires needed to bench test the units, then send them back to me, he know his programs, and i sent some more things.

DWALEX · 01-17-2014, 01:39 PM

Quote:

Originally Posted by The Stig

Do you have an automatic or a manual?

Automatic

Pagliaro · 01-17-2014, 01:59 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Are you nuts, LOL that is far to long a job, but we did send GTpix all the wires needed to bench test the units, then send them back to me, he know his programs, and i sent some more things.

Bench test is good enough for me. That's all I wanted to know.

Yes sometimes I can be nutty.

Did you get in contact with Richard for anything 2014 related?

CamaroI · 01-17-2014, 02:16 PM

Can you guys with 2010's take some photos further back like from the door looking in on passenger side and drivers. Also pics while sitting in drivers seat. Cover the gambet from far away to up close.

2SSRS@Gen5diy · 01-17-2014, 03:11 PM

Quote:

Originally Posted by CamaroI

Can you guys with 2010's take some photos further back like from the door looking in on passenger side and drivers. Also pics while sitting in drivers seat. Cover the gambet from far away to up close.

here you go.

Dont look at the fact that the Onstar is siting there, this car is my test car.

This will show the fit of the head unit to the dash in the 2010 cars.

Note so we have the final $ set for you guys, will post them next week, we think will do a grope buy that way we can save you guys lots of cash.

01-17-2014, 12:52 PM	#970
DWALEX Drives: Currently 2016-2SS, Future ZL1/Z28 Join Date: Jul 2010 Location: Kansas Posts: 978	I don't have any issue with this but is a little difficult to put back __________________ ...First CAMARO (2SS/RS 2010)

01-17-2014, 01:09 PM	#974
Pagliaro RIP Betsy ( Vitara ) Drives: '11 SGM 1LT/RS Join Date: Oct 2012 Location: Ottawa, Ontario Posts: 1,178	Ofer are you testing each unit in your car after programming? __________________ First retrofitted 2014 mylink.

01-17-2014, 12:30 PM	#967
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	It helps get the part back in the car, i used a dremal on my trim to mod it, its not hard at all.

01-17-2014, 02:16 PM	#979
CamaroI Drives: 2010 IOM Camaro Join Date: Aug 2012 Location: DFW Posts: 3,112	Can you guys with 2010's take some photos further back like from the door looking in on passenger side and drivers. Also pics while sitting in drivers seat. Cover the gambet from far away to up close.