Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics > ZL1 Wheels/Tires


Reply
 
Thread Tools
Old 05-08-2017, 07:26 PM   #1
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
12" wide rear wheels On a ZL1

I want to run a 20x12 43 offset on the rear. The number seem to work but i was wondering if anyone else has run a 12 and what tire size did they use? I am thinking of 335/30/20 or some 345/30/20 like cup 2s.
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter

Last edited by Zl1TopLess; 05-08-2017 at 07:53 PM.
Zl1TopLess is offline   Reply With Quote
Old 05-08-2017, 07:28 PM   #2
Redlineviper

 
Redlineviper's Avatar
 
Drives: 2013 ZL1
Join Date: Jan 2015
Location: Orlando
Posts: 938
Quote:
Originally Posted by Zl1TopLess View Post
I want to run a 20x12 43 offset on the rear. The number seem to work but i was wondering if anyone else has run a 12 and what tire size did they use? I am thinking of 332/30/20 or some 345/30/20 like cup 2s.
Good luck finding 332/30/20 tires.

The wheel should fit fine depending on what tires you put on there, it could rub on the inner fender
__________________
2013 A6 ZL1
Redlineviper is offline   Reply With Quote
Old 05-08-2017, 07:54 PM   #3
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
Quote:
Originally Posted by Redlineviper View Post
Good luck finding 332/30/20 tires.

The wheel should fit fine depending on what tires you put on there, it could rub on the inner fender
fixed
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
Old 05-08-2017, 07:55 PM   #4
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
Quote:
Originally Posted by Redlineviper View Post
Good luck finding 332/30/20 tires.

The wheel should fit fine depending on what tires you put on there, it could rub on the inner fender
Cup 2 345/30ZR20
(106Y) SL
180 AA A 2,094 lbs. 51 psi 7.2/32" 33 lbs. 11.5-12.5" 12" 13.8" 12.7" 28.2" 738 FR
From Tire Rack
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
Old 05-09-2017, 10:42 AM   #5
Can'tHave2MuchHP

 
Can'tHave2MuchHP's Avatar
 
Drives: 2013 ZL1 Convertible M6
Join Date: Mar 2015
Location: Michigan
Posts: 1,608
I'm honestly not seeing a 12 inch wheel fitting very well without sticking wayyyy out side of the fender. If you do it, be sure to post pics because a Corvette size wheel/tire would look sick on our cars.
Can'tHave2MuchHP is offline   Reply With Quote
Old 05-09-2017, 10:50 AM   #6
Liquidity
Account Suspended
 
Drives: 2015 Camaro Z/28
Join Date: Feb 2017
Location: Camaroland
Posts: 307
12' wheels would look really nice.
Liquidity is offline   Reply With Quote
Old 05-09-2017, 04:57 PM   #7
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
So am i going to be the guinea pig? That's an expensive chance. But the numbers seem to all work and i have checked the clearances and its there. The front wheel is about 3 to 5 mm in and the rear is about 15 mm in from outer fender lip to rim face. with a 20x12 43 that's another 13 out, it will be close. I was also consider a 11.5 just to hit the min on a 335 tire. Whats the widest tire anyone has put on the 20x11 43 wheel? Was there any rubbing issues? Camber does come into play with these numbers.
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
Old 05-09-2017, 09:06 PM   #8
Can'tHave2MuchHP

 
Can'tHave2MuchHP's Avatar
 
Drives: 2013 ZL1 Convertible M6
Join Date: Mar 2015
Location: Michigan
Posts: 1,608
Quote:
Originally Posted by Zl1TopLess View Post
So am i going to be the guinea pig? That's an expensive chance. But the numbers seem to all work and i have checked the clearances and its there. The front wheel is about 3 to 5 mm in and the rear is about 15 mm in from outer fender lip to rim face. with a 20x12 43 that's another 13 out, it will be close. I was also consider a 11.5 just to hit the min on a 335 tire. Whats the widest tire anyone has put on the 20x11 43 wheel? Was there any rubbing issues? Camber does come into play with these numbers.
Honestly if you can find a local guy with a GS/Z06/ZR1 body style in C6 or C7 to unbolt his and mock them up on your ZL1 you'd be able to get an idea, those are be 20x12 with 59mm offset, bolt pattern should be the same. Not 100% sure it would work at all but it's worth a shot if you can.

I know a 11" wheel will stick out the same as a 12" wheel as the 12" just adds more on the inside. This is unventured territory.
Can'tHave2MuchHP is offline   Reply With Quote
Old 05-09-2017, 10:19 PM   #9
E. Bryant
Gearhead
 
E. Bryant's Avatar
 
Drives: 2012 ZL1
Join Date: Jun 2014
Location: Michigan
Posts: 239
Here is my car with the OE Z28 wheels, 305/30R19 tires, and stock ride height:



As you can see, this wheel/tire fitment already sticks out past the fender lip. With a 26" tall tire, it doesn't rub, but I'd be concerned that a 28" tall tire would contact sheetmetal.
__________________


2012 Chevrolet Camaro ZL1 M6 - JRE 650 RWHP kit, AFCO heat exchanger, JPSS V4 aero, Z28 wheels for the twisties and Weld big-n-littles for the dragstrip.
11.193@128.13 in 515' DA
E. Bryant is offline   Reply With Quote
Old 05-09-2017, 10:37 PM   #10
VicV
 
Drives: 2012 Camaro ZL1 #1458
Join Date: May 2012
Location: East China, Michigan
Posts: 10
Does anyone know if a 315/35ZR/20 will work on the rears of a ZL1
VicV is offline   Reply With Quote
Old 05-10-2017, 11:04 AM   #11
Can'tHave2MuchHP

 
Can'tHave2MuchHP's Avatar
 
Drives: 2013 ZL1 Convertible M6
Join Date: Mar 2015
Location: Michigan
Posts: 1,608
Quote:
Originally Posted by VicV View Post
Does anyone know if a 315/35ZR/20 will work on the rears of a ZL1
Yes those will absolutely work on OEM ZL1 wheels.
Can'tHave2MuchHP is offline   Reply With Quote
Old 05-11-2017, 07:47 AM   #12
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
Quote:
Originally Posted by E. Bryant View Post
Here is my car with the OE Z28 wheels, 305/30R19 tires, and stock ride height:



As you can see, this wheel/tire fitment already sticks out past the fender lip. With a 26" tall tire, it doesn't rub, but I'd be concerned that a 28" tall tire would contact sheetmetal.
Z28 wheels have a different offset, i believe its,
Quote:
F 19x11ET11 (25mm further out than ZL1/1LE wheels)
R 19x11.5ET26 (23mm further out than ZL1/1LE wheels)
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
Old 05-11-2017, 07:53 AM   #13
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
With a 20x12 43 offset, Thats plus 13 either way. The inside has room and it should make the outside flush or just under. I may just go wuth 11.5 43 offset to be safe. With that i can run a 345/30/20 cup 2 O.D. is 28.2 just under stock. They are on the narrow side of just 12.7 tread width. The wheel width minimum spec is 11.5.
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
Old 05-17-2017, 11:49 AM   #14
Zl1TopLess
 
Zl1TopLess's Avatar
 
Drives: 2013 Victory Red ZL1 M6 Vert
Join Date: Sep 2014
Location: Auburn Hills, Mi
Posts: 56
So I ordered VS02 in matte brushed bronze
20x10 23 offset front with 285/35/20 Cup 2
20x11.5 43 offset rear with 325/30/20 Cup 2
and now I wait 5-7 weeks.
__________________
2013 ZL1 M6

Roto Fab CAI, Kooks Long tube Headers with catless connection pipes, 90mm Ported throttle body to match ported supercharger snout. 2.55 upper pulley, Roto Fab intercooler tank, ID 850 injectors, 9.5 mm wires, Custom 93 octane tune. 600 whp. Hotchkis coils.

White Collar Grease Monkey
https://www.youtube.com/user/gjodexter
Zl1TopLess is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:10 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.