**Sold** Magnuson TVS2300 rear OD pulleys - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

11syn3rgy · 07-02-2013, 05:01 PM

Hey guys,

Anyone want to trade some Maggie rear overdrive pulleys for a 3.6 front pulley? I would be open to selling these rear OD pulleys as well. They came with the package that I just bought from SLP. The blower is still sitting on my work bench and everything is brand new! Let me know if you have any questions or interest.

Thanks!

linehand7 · 07-02-2013, 10:36 PM

i would be interested in the overdrive pulleys and belt, how much? sorry i dont hav a 3.6 pulley to trade.

Supercharged Red · 07-03-2013, 10:35 AM

Are you sure they are OD pulleys? I don't think they send them out new with OD pulleys.

11syn3rgy · 07-03-2013, 02:37 PM

Guys,

I am positive that they are OD pulleys, and they did actually come with this set up. They are 3.0 and 3.49 pulleys which is exactly what you want. This set up was purchased brand new from SLP and it's what they install on their ZL750 and it creates 14 lbs of boost (with the proper front pulley of course). In fact, I have that 3.4 pulley as well if anyone is interested? Unfortunately, I will need the belt as the set up also came with the stock pulleys. but just the one (rear) belt. I'm not looking to get rich on letting these pulleys go and maybe one day I'll regret selling them, but at this point I have no intention of cranking up this blower quite that far. PM me a "fair" price and I'll sell them. I suppose it's only fair to let linehand7 get the first crack.

Thanks!
John

11syn3rgy · 07-03-2013, 04:18 PM

Dumb question guys, but what's the difference between cog pulleys and overdrive pulleys? I assume that these are just OD pulleys, but I'm not sure what the difference is. Just want to make sure I'm saying the right things. I'm a little new to the supercharger world. Thanks!

11syn3rgy · 07-03-2013, 04:26 PM

These rear pulleys are a 10-rib design. Sounds like cogs have "teeth"? No teeth here. Let me know if anyone is interested? Linehand7 passed. He wants the cog set up.

11syn3rgy · 07-04-2013, 09:29 PM

Bump

11syn3rgy · 07-06-2013, 06:06 PM

What are these worth guys? I will have the 2 rear pulleys (3.0 and 3.49) and the front 3.4 pulley available next week. Getting my new Magncharger installed next Sunday and going back to the stock configuration for now. They are brand new and never been used.

11syn3rgy · 07-07-2013, 02:52 PM

Bump

Supercharged SS · 07-07-2013, 02:55 PM

Can you post a picture or what you have? I'm not aware of 10 rib overdrive pulleys.

11syn3rgy · 07-07-2013, 05:28 PM

Quote:

Originally Posted by Supercharged SS

Can you post a picture or what you have? I'm not aware of 10 rib overdrive pulleys.

Here you go...

11syn3rgy · 07-09-2013, 03:12 PM

Anyone interested? I really have no use for these brand new pulleys. Seems like a great way to increase boost without any belt slip. Sounds like the smaller front pulley is what typically causes slippage. The use of these rear OD pulleys and the 3.8 front pulley should bring you down to around the equivilant of having a 3.2 or 3.3 front pulley from what I've read. I just don't plan on cranking mine up quite that far. SLP uses these rear pulleys with the 3.4 front pulley to create 14 lbs of boost and it's what they use in their ZL750!!

11syn3rgy · 07-11-2013, 08:48 PM

Bump

11syn3rgy · 07-21-2013, 08:47 PM

Still available

07-02-2013, 05:01 PM	#1
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Sold Magnuson TVS2300 rear OD pulleys Hey guys, Anyone want to trade some Maggie rear overdrive pulleys for a 3.6 front pulley? I would be open to selling these rear OD pulleys as well. They came with the package that I just bought from SLP. The blower is still sitting on my work bench and everything is brand new! Let me know if you have any questions or interest. Thanks! Last edited by 11syn3rgy; 07-24-2013 at 10:04 AM. Reason: Sold

07-03-2013, 10:35 AM	#3
Supercharged Red Drives: 2011 Camaro 2SS/RS A6 Victory Red Join Date: Aug 2012 Location: Snohomish WA Posts: 203	Are you sure they are OD pulleys? I don't think they send them out new with OD pulleys. __________________ 2011 Camaro 2SS/RS A6/L99 Victory Red SLP TVS2300 Supercharger 6psi & Coil Covers. Roto Fab CAI. RX Catch can ZL1 Fuel Pump Kooks 1 7/8" LT Headers w/ High Flow Cats Corsa out the back! NT555R 305/35/20 472 RWHP 466 RWTQ 12.11 @ 114.3 MPH 1.81 60' Pacific Raceways Kent, WA 6/6/13

07-02-2013, 10:36 PM	#2
linehand7 Drives: 03 duramax 01impala 2010 2ssrs Join Date: Feb 2009 Location: lead sd Posts: 142	i would be interested in the overdrive pulleys and belt, how much? sorry i dont hav a 3.6 pulley to trade.

07-03-2013, 02:37 PM	#4
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Guys, I am positive that they are OD pulleys, and they did actually come with this set up. They are 3.0 and 3.49 pulleys which is exactly what you want. This set up was purchased brand new from SLP and it's what they install on their ZL750 and it creates 14 lbs of boost (with the proper front pulley of course). In fact, I have that 3.4 pulley as well if anyone is interested? Unfortunately, I will need the belt as the set up also came with the stock pulleys. but just the one (rear) belt. I'm not looking to get rich on letting these pulleys go and maybe one day I'll regret selling them, but at this point I have no intention of cranking up this blower quite that far. PM me a "fair" price and I'll sell them. I suppose it's only fair to let linehand7 get the first crack. Thanks! John

07-03-2013, 04:18 PM	#5
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Dumb question guys, but what's the difference between cog pulleys and overdrive pulleys? I assume that these are just OD pulleys, but I'm not sure what the difference is. Just want to make sure I'm saying the right things. I'm a little new to the supercharger world. Thanks!

07-03-2013, 04:26 PM	#6
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	These rear pulleys are a 10-rib design. Sounds like cogs have "teeth"? No teeth here. Let me know if anyone is interested? Linehand7 passed. He wants the cog set up.

07-04-2013, 09:29 PM	#7
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Bump

07-06-2013, 06:06 PM	#8
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	What are these worth guys? I will have the 2 rear pulleys (3.0 and 3.49) and the front 3.4 pulley available next week. Getting my new Magncharger installed next Sunday and going back to the stock configuration for now. They are brand new and never been used.

07-07-2013, 02:52 PM	#9
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Bump

07-07-2013, 02:55 PM	#10
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	Can you post a picture or what you have? I'm not aware of 10 rib overdrive pulleys.

07-09-2013, 03:12 PM	#12
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Anyone interested? I really have no use for these brand new pulleys. Seems like a great way to increase boost without any belt slip. Sounds like the smaller front pulley is what typically causes slippage. The use of these rear OD pulleys and the 3.8 front pulley should bring you down to around the equivilant of having a 3.2 or 3.3 front pulley from what I've read. I just don't plan on cranking mine up quite that far. SLP uses these rear pulleys with the 3.4 front pulley to create 14 lbs of boost and it's what they use in their ZL750!!

07-11-2013, 08:48 PM	#13
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Bump

07-21-2013, 08:47 PM	#14
11syn3rgy JT Synergy RS/2SS Drives: 2011 Camaro RS/2SS (L99) Synergy Join Date: May 2013 Location: Hager City, WI Posts: 697	Still available