You are browsing camaro5 
 |
|
02-05-2016, 05:06 PM
|
#1 |
 
|
WHIPPLE ON STOCK ENGINE??????
Can I install the 2.9l whipple on stock engine with stock headers?? I would have the Cat's deleted and use the stock exhaust. If I keep it on low boost will I be ok for a while or do I have to upgrade the drive shaft and torque converter right away? And will the stock headers hold up to the boost??
|
|
|
|
02-05-2016, 05:10 PM
|
#2 |
   Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
I don't have a whipple but I have a Maggie TVS2300.. my engine is stock with stock headers and stock exhaust, my engine is holding up great so far.. I'm running at 8#'s of boost. It's all about the tune, if you get your car tuned by a reputable person who knows what they are doing.. your car will last a long time.
__________________
 2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
|
|
|
|
02-05-2016, 05:18 PM
|
#3 |
|
|
What's did yours dyno at??? Mine is an automatic so I know I'll be less.
|
|
|
|
|
02-05-2016, 05:22 PM
|
#4 |
|
Drives: 2013 Camaro 2SS/RS M6 Join Date: Feb 2013
Location: So Cal
Posts: 1,048
|
535RWHP / 472 RWTQ @8 PSI w/stock pulley
__________________
2013 Black / Black Camaro 2SS/RS M6 w/Magnuson TVS2300, ZL1 Fuelpump / ADM FPCM, NPP Exhaust, Cold Air Inductions CAI w/ Scoop, Elite Engineering Catch Can, VMAX Ported TB, OEM 1LE Front Splitter, AAC Ghosted Side Markers, Dropped on BMR Split Drop Springs Build#24869 |
|
|
|
|
02-05-2016, 05:27 PM
|
#5 | |
|
|
Quote:
|
|
|
|
|
|
02-05-2016, 05:28 PM
|
#6 |
 Drives: 2010 2SS/RS LS3 Join Date: Apr 2011
Location: Greensburg,PA.
Posts: 151
|
You sure can! I would get it tuned By a good tuner. I used race proven motorsports in DE. I did put a blower cam in it also. They got we down at 747 rwhp and 627 rwtq. with 11 psi boost. That's about all you want to go on a stock block before it goes boom.
|
|
|
|
|
02-05-2016, 05:31 PM
|
#7 |
 Drives: 2013 SS whipple Join Date: Jan 2016
Location: Alabama
Posts: 22
|
My car is stock other than the whipple 500 HP 493 TQ im on the whipple tune the car runs great but a custom tune would pick up some power
|
|
|
|
|
02-05-2016, 06:34 PM
|
#8 |
|
|
What are some problems you all have encountered with a supercharger?
|
|
|
|
|
02-05-2016, 06:43 PM
|
#9 |
|
Drives: 2013 SS whipple Join Date: Jan 2016
Location: Alabama
Posts: 22
|
Only problem ive had is no traction
|
|
|
|
|
02-05-2016, 06:53 PM
|
#10 |
|
|
That can be fixed with smaller rims and some Mickeys. Actually what is the smallest rim you can put on a stock SS. I heard it was 18inch but I'm not sure.
|
|
|
|
|
02-05-2016, 07:19 PM
|
#11 |
     
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
Pretty sure you can get a 16 inch on there but a lot of people run 17's. You will be happy with both just have to decide which one.
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
|
|
|
|
02-05-2016, 07:25 PM
|
#12 |
|
|
[QUOTE=10aSSee D;8885532]Pretty sure you can get a 16 inch on thefigure lot of people run traction u will be happy with both just have to decide which one.[/Qill E]
Do you have any recommendations as to where to buy these rims. i figure I'll need alot more traction to get moving quickly. Either way if I get TT or whipple I'll need better tires.
|
|
|
|
|
02-05-2016, 07:47 PM
|
#13 | |
Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
|
Quote:
Do yourself a huge favor and get an agp kit. You will be much happier in the long run
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
|
|
|
|
|
|
02-05-2016, 08:32 PM
|
#14 |
|
Drives: Silver 2010 SS Camaro Join Date: Jul 2009
Location: TN
Posts: 2,562
|
What kind of rims are you looking for?
__________________
MODS:
ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq |
|
|
|
|
|
|
|
 |
|
|
