01-10-2018, 07:06 PM | #1 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
Huron Twins update
Well, it has been a while since swapping out my Maggie for the Huron twin kit.
First and foremost, huge thanks to Jon at Huron with a super nice complete kit. Very well constructed manifolds down to the oil feed lines and fittings. But most of all, every time I contacted Jon, he immediately got back to me asap!! Base kit with Tubular manifolds and a pair of journal 62/65's, along with the 127lb injectors. I already had the ADM twin pumps which I replaced the pumps with DW300's. OEM intake with an Bo White Tbody firing on Iridium 7's @30. No e85 yet! Straight 93 848hp/754tq @ 14psi Thanks again Jon and Mat Sorian for the tuning. |
01-10-2018, 07:13 PM | #2 |
Nice just got mine done just need tuned but turn cold and crappy so will have to wait. mine is 376 with 64/65s ready for spring
__________________
|
|
01-10-2018, 07:14 PM | #3 |
and you are right Jon has be awesome to deal with
__________________
|
|
01-10-2018, 07:17 PM | #4 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
Matt is a beast he tune my sht
Sent from my SM-N950U using Tapatalk |
01-10-2018, 07:18 PM | #5 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
When i get that lc32 billet inlet and lc32 bracket and 102mm yup ill be pulling away from turbo cars watch
Sent from my SM-N950U using Tapatalk |
01-10-2018, 07:31 PM | #6 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
|
01-10-2018, 07:33 PM | #7 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
|
01-10-2018, 07:35 PM | #8 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Nice results Lee, I bet that is a blast to drive!
Thanks for the kind words as well, I appreciate it! Always fun working on these set-ups with customers, happy to help with anything you need. Always feel free to ask! Jon Huron Speed |
01-10-2018, 07:47 PM | #9 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Post up some photos and videos when you can Lee!
|
01-10-2018, 07:56 PM | #10 |
Drives: Twin turbo G8 GXP Join Date: Dec 2012
Location: MD
Posts: 454
|
OP, manual or auto trans?
__________________
9.88 @ 144
https://youtu.be/nN0rz1RAcJw |
01-10-2018, 08:10 PM | #11 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
|
01-10-2018, 08:48 PM | #12 |
Drives: Black 2SS RS w/White Stripes Join Date: Mar 2011
Location: Katy, TX
Posts: 775
|
Nice results. I have the ADM setup as well. What do you think of the DW300 pumps? Did you have to reprogram the FPCM?
What's your compression ratio?
__________________
2010 2SS/RS "ChriSStine":
Pat G Custom Turbo CamMotion Camshaft | AGP TT BB Garrett 62/65's | AGP/Fore Triple Pumps | ID1700X Injectors | Alky Control Twin Nozzle Meth | Custom 3" Exhaust | 3.27 gear set w/ Tru Trac | McLeod Twin RXT | Barton Short Throw Shifter | 6th Gen ZL1 Wheels | BMR 1.4" drop springs | Pfadt rear trailing arms & tie rods | Installed by Me & Tuned by Pat G |
01-10-2018, 09:49 PM | #13 |
Drives: Moneypit Join Date: Nov 2013
Location: Jax FL
Posts: 163
|
9:1 and swapped out the 3.91's with 3.27 as recommended
Now trying to decide on keeping the 20's and throwing mt et's on them or sell both sets of rims and get a set of 17 or 18's |
01-10-2018, 09:50 PM | #14 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
20 fronts 18s rear drag pack
Sent from my SM-N950U using Tapatalk |
|
|
|
|