SD Concepts Engineering Dyno Day videos! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

v6sonoma · 10-31-2010, 02:06 AM

Well I can honestly say it was a successful event. Good turnout and lot's of fun.

The food they had was EXCELLENT! Kudo's to the chef. She did great and everyone appreciated it.

It was great talking with everyone and fun to see everyone pop their Dyno cherry! lol

We even Dynoed the tow truck! lol Sorry guys that left early you missed it! Here's the vids I took.

They are all in HD but you may have to select it as I think it defaults to 480p.

95RedCamaroz28 · 10-31-2010, 10:29 AM

was that on a mustang dyno?

v6sonoma · 10-31-2010, 03:40 PM

It was on a Dyno-Max dyno. It seemed to read a bit lower than most. I think Paul's lower numbers were do to him only having 1600 miles still, what really threw me was when Bee's went up it's numbers fell right inline with where an L99 should be. So Who knows! lol It was still a fun day.

R6P · 10-31-2010, 06:25 PM

Cool vids, wish I could have been there... working saturdays sucks :(

2010 SSRS · 10-31-2010, 06:47 PM

awesome vids, wish I could have made it there.

Monte · 11-01-2010, 07:56 AM

I was amazed at how many of you guys showed up! Had a great day....still don't know how I got roped into running the dyno again though

.

PAUL SS · 11-01-2010, 08:05 AM

Quote:

Originally Posted by v6sonoma

It was on a Dyno-Max dyno. It seemed to read a bit lower than most. I think Paul's lower numbers were do to him only having 1600 miles still, what really threw me was when Bee's went up it's numbers fell right inline with where an L99 should be. So Who knows! lol It was still a fun day.

Nice vids of the big monitor, I reviewed them for some info. Ken Hoffman made 342 hp and his torque was about the same number. I only made 326 hp, but my torque maxed out at 340 at 4600 rpm's. Not sure what this means but it is interesting. I am not happy about being down 100 horsepower at the rear wheels.

v6sonoma · 11-01-2010, 08:51 AM

Quote:

Originally Posted by PAUL SS

Nice vids of the big monitor, I reviewed them for some info. Ken Hoffman made 342 hp and his torque was about the same number. I only made 326 hp, but my torque maxed out at 340 at 4600 rpm's. Not sure what this means but it is interesting. I am not happy about being down 100 horsepower at the rear wheels.

You could always try the fuse pull. It's possible you got some bad gas.

Also you haven't even changed it's oil yet! That alone could hurt it a bit. I mean it's been in there for over a year! Of course since you're putting it away for the winter I'd wait till you take it out next year. Keep in mind you only did one pull. Normally you would do 3 pulls and it would probably have gone higher.

PAUL SS · 11-01-2010, 09:01 AM

I think they did the pull in 6th gear! Does it matter if traction controll is on or off?

v6sonoma · 11-01-2010, 09:06 AM

Traction control should be off but 6th gear wouldn't matter. Although the dyno probably wouldn't have liked it spinning to 155mph. Of course if it was in 5th or 6th it would have hit the speed limiter long before 6500 rpm's.

v6sonoma · 11-01-2010, 09:08 AM

Here's a copy of my dyno run earlier this year.

PAUL SS · 11-01-2010, 09:09 AM

Here are some video's and pictures of the event.

Ken and Hap

PAUL SS · 11-01-2010, 09:14 AM

Quote:

Originally Posted by v6sonoma

Here's a copy of my dyno run earlier this year.

Might have to visit that dyno next spring.

v6sonoma · 11-01-2010, 09:58 AM

Quote:

Originally Posted by PAUL SS

Might have to visit that dyno next spring.

I wouldn't worry to much. I would say if you're REALLY concerned do the fuse pull and see if it feels any different, but I don't think it's anything to worry about.

10-31-2010, 02:06 AM	#1
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Dyno Day videos! Well I can honestly say it was a successful event. Good turnout and lot's of fun. The food they had was EXCELLENT! Kudo's to the chef. She did great and everyone appreciated it. It was great talking with everyone and fun to see everyone pop their Dyno cherry! lol We even Dynoed the tow truck! lol Sorry guys that left early you missed it! Here's the vids I took. They are all in HD but you may have to select it as I think it defaults to 480p. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery! Last edited by v6sonoma; 11-01-2010 at 09:59 AM.

10-31-2010, 03:40 PM	#3
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	It was on a Dyno-Max dyno. It seemed to read a bit lower than most. I think Paul's lower numbers were do to him only having 1600 miles still, what really threw me was when Bee's went up it's numbers fell right inline with where an L99 should be. So Who knows! lol It was still a fun day. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

10-31-2010, 06:25 PM	#4
R6P Drives: 2010 Camaro Join Date: Aug 2009 Location: Quahog, Rhode Island Posts: 1,171	Cool vids, wish I could have been there... working saturdays sucks :( __________________

10-31-2010, 06:47 PM	#5
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	awesome vids, wish I could have made it there. __________________ Jannetty Racing JRE Street Package

11-01-2010, 07:56 AM	#6
Monte Drives: '88 Monte Carlo SS, '10 Camaro SS Join Date: Jan 2010 Location: RI Posts: 224	I was amazed at how many of you guys showed up! Had a great day....still don't know how I got roped into running the dyno again though . __________________ -Chris '10 Camaro SS '88 Monte Carlo SS

10-31-2010, 10:29 AM	#2
95RedCamaroz28 Drives: 2010 Camaro 2SS/RS M6 Rally Yellow Join Date: Sep 2008 Location: Rhode Island Posts: 142	was that on a mustang dyno?

11-01-2010, 09:01 AM	#9
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	I think they did the pull in 6th gear! Does it matter if traction controll is on or off? __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

11-01-2010, 09:06 AM	#10
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Traction control should be off but 6th gear wouldn't matter. Although the dyno probably wouldn't have liked it spinning to 155mph. Of course if it was in 5th or 6th it would have hit the speed limiter long before 6500 rpm's. __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

11-01-2010, 09:08 AM	#11
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Here's a copy of my dyno run earlier this year. Attached Images __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

11-01-2010, 09:09 AM	#12
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Here are some video's and pictures of the event. Ken and Hap __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MarylandSpeed DYNO TESTED: Diablosport Predator Canned Tune on 2010 SS A6	MarylandSpeed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	27	05-18-2013 10:01 PM