01-24-2011, 09:33 AM | #1 |
Drives: 2010 Camaro 2SS Black/Purple Join Date: Jul 2008
Location: Thousand Oaks, CA
Posts: 49
|
Ventura County exhaust install/tune?
Apologies if this has been addressed already, but I have searched and found no definitive answer to the following question:
Who would you recommend for a cat-back/axle-back install and tune in Ventura county? Would I be better off ordering the kit and just having them install it, or do the best shops not like you bringing in your own eggs to get cooked breakfast? Thanks in advance for the feedback! -Mordeen
__________________
1100 - 3/16
<chirp chirp> <chirp chirp> <chirp chirp> <chirp chirp> 1100 - 6/30 ?!?!?! Cancelled - 6/30 Purchased and driven home from new dealer - 7/1 Last edited by Mordeen; 01-24-2011 at 10:32 AM. Reason: fatfingers |
01-24-2011, 09:49 AM | #2 |
Depends on what exhaust you are putting on. But most manufacturer's have a dealer link on their web sites and you can find someone that way. Even your dealer will most likely install it for you though will probably be expensive. I went Borla Shorites and Cat Back and since they are local to Ventura County and used my car for some R&D, they installed for me for free.
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
01-24-2011, 09:56 AM | #3 |
Drives: 2010 Camaro 2SS Black/Purple Join Date: Jul 2008
Location: Thousand Oaks, CA
Posts: 49
|
I'm definitely not going the dealer route, cuz I'm not a fan of getting gouged. I did a search on Borla's site for a local installer, but to no avail. I brought my inquiry here because I know I'll get valuable feedback and not just a listing.
I'm leaning towards the SLP Loudmouth II, but I'm not set on it. I'll take a recommendation from a trusted installer. -Mordeen
__________________
1100 - 3/16
<chirp chirp> <chirp chirp> <chirp chirp> <chirp chirp> 1100 - 6/30 ?!?!?! Cancelled - 6/30 Purchased and driven home from new dealer - 7/1 |
01-24-2011, 10:04 AM | #4 |
Not sure if you are using the Locator correctly. I just did Camarillo Zip (don't know TO zip) and it came up with 9 installers with in 25 miles. None of them Borla specific just certified to install. Good luck though.
Heres a search from the SLP sight and this looks like the closest to you. SWEENEY'S CUSTOM MUFFLER 1617 W. SEPOLVEDA BLVD # 3 TORRANCE, CA 90501 (310) 326-0611
__________________
2010 2SS/RS RJT, ADM CAI, Borla Shorties, Borla "S" Cat Back, Edelbrock E-Force Supercharger, GMS Wires, GMS Rear Trailing Arms, GMS Rotors, GMS End Links, GMS Tunnel Brace, GMS Rear Tie Rods, GMS 1G Suspension Package, GMS Stage 3 CNC ported heads, GMS Spec'd R12 Custom Ground Camshaft, Snow Meth Injection, GMS Custom Tuned, Norris Catch Can, MTI Brake Lines, Pfadt Coilovers, Sway Bars, Camber Kit, and Rear LCA Reinforcement, , AAC Footwell, Trunk, DRL and Dome LED Lighting, Technostalgia Tail Lights, RED B/A Pedals, Kompression Custom Wheels with Nitto tires, 621RWHP/584RWTQ
|
|
01-24-2011, 10:37 AM | #5 |
Drives: 2010 Camaro 2SS Black/Purple Join Date: Jul 2008
Location: Thousand Oaks, CA
Posts: 49
|
That's weird, because I just put 93012 in the Borla locator, and got a mere 3 installers in the search range; one of which was in Ventura Co., and they're a vette specialty shop.
Regardless, as the day progresses, I'm sure I'll get some feedback on here. Thanks for helping Tom. -Mordeen
__________________
1100 - 3/16
<chirp chirp> <chirp chirp> <chirp chirp> <chirp chirp> 1100 - 6/30 ?!?!?! Cancelled - 6/30 Purchased and driven home from new dealer - 7/1 |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OK...I'm starting a better V6 exhaust examples thread!! | KMPrenger | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 611 | 07-01-2020 08:49 AM |
*/* Exhaust and Intake's */* Borla/Magnaflow/ Agency Power/ K&N/ AEM */* | ImportImage | V8 Bolt-Ons & Tunes | 73 | 11-01-2010 10:21 PM |
(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s) | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 162 | 07-09-2009 06:39 AM |