03-18-2014, 07:19 PM | #1 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Tube replacement?
Hi all- I was working on my car tonight and I broke the tube in the picture below. It connects to the cold air intake tube and the vacuum line next to the throttle body. Does anyone know what this part is called and if it's easy to find a replacement? I was thinking it's part of the PCV system because there is some oil in it, but the picture of this piece doesn't show in the parts catalog.
Any help is appreciated! |
03-18-2014, 08:48 PM | #2 |
Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011
Location: MN
Posts: 2,250
|
That's actually the clean side oil separator. It connects to the driver side intake tract. Should be available from the local dealer. Wasn't it connected?
|
03-18-2014, 09:01 PM | #3 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Yes, I found out it's the breather cannister and it's $100 to replace because it can't be bought separately. Gonna try to plastic weld it. I had to remove the intake elbow and this was attached and when I removed it it snapped apart.
|
03-18-2014, 10:01 PM | #4 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
JB Weld for plastic to the rescue! $7 at Oreillys brother! I did the exact same thing then spray painted it black? You'll never notice the difference!
__________________
ADM built 2013 Triple Black ZL-1 Convertible M6
ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq |
03-19-2014, 12:08 AM | #5 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
Yep....same thing here!!
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
03-19-2014, 07:26 AM | #6 |
COTW 12/3/12
Drives: 2012 Ashen Gray ZL1 Join Date: Aug 2011
Location: Glen Carbon, IL
Posts: 3,279
|
Glad to hear I'm not alone in this! I was really surprised when the piece pretty much came apart in my hand with very little pressure. I'll be picking up some JB Weld today!
|
|
|
|
|