ZL1 or Z/28 belly pan on a 2013 1LE - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

olblue75 · 07-07-2016, 10:17 AM

Quote:

Originally Posted by BlackenedRR

Where did you get that Stormtrooper cup?!?! LOL

Disney Star Wars Cruise back in January...

olblue75 · 07-07-2016, 10:18 AM

Quote:

Originally Posted by Firefighter

Cool so I'll have to do pretty similar...

I just realized you put the car description there. I should have read better the first time.

Thinking about getting some nut plate/clips to put in those 3 holes to really tie it all down..

fishcop · 07-07-2016, 12:53 PM

Quote:

Originally Posted by olblue75

2010 SS/RS with a 1LE splitter. I used body bolts from Lowes their self tapping so need for the inserts.

do you have an exact link for me ? I need to know the size of the bolt before I order... thank you

olblue75 · 07-07-2016, 05:09 PM

There like 3/4 inch long an maybe a 3/8 just go to Lowe an go over to the fastener section and check out there automotive hardware. 3/8 or 5/16x3/4 I think a 5/8 in length would work well to.

cdb95z28 · 07-07-2016, 07:32 PM

Quote:

Originally Posted by fishcop

I bought a belly pan z28 in Germany - can someone exactly tell me what kind of screws I need to order to install that belly pan on my 2013 SS

Thank you in advance

If you can get GM parts, here is what I used on my 2014
I'm looking at my receipt:

-11 Insert nuts, # 11570215, use in square holes on subframe
-3 clip nuts, #11517841, use these at the leading edge of the front of belly pan @ bumper cover, use existing bolts
- As for the remaining bolts (11), M6x25 will work, use a flat washer with them

olblue75 · 07-07-2016, 08:15 PM

Since his is a 2013 he'll already have the holes for the inserts which is big help..

fishcop · 07-08-2016, 04:54 AM

Perfect ... Thank you very much - i will have a look into these gm parts !! I am quite sure that I can order it here ��

fishcop · 08-09-2016, 12:45 PM

I found an insert nut in an online shop the picture is like this in ghe attachment - can you confirm thats the same like the insert nut?

cdb95z28 · 08-09-2016, 03:04 PM

No, they are steel, though if I remember correctly, this is not exactly what they look like
Name: 13-776.jpg
Views: 1043
Size: 81.5 KB

fishcop · 08-09-2016, 03:08 PM

perfect thank you - this helps a lot

HogsFan75 · 08-09-2016, 03:16 PM

I just installed mine on my 2015.

You need 11 of the following and the bolts that screw into them.
11570215 Underbody Shield Retainer
M6x1x25

I also had to trim the leading edge of the pan to get it to fit. Used a dremel

fishcop · 08-09-2016, 03:26 PM

Yes but you cant buy this here in Germany - i called some gm dealer but noone could help me - now I know how they look like and this helps a lot.

HogsFan75 · 08-09-2016, 03:31 PM

Quote:

Originally Posted by fishcop

Yes but you cant buy this here in Germany - i called some gm dealer but noone could help me - now I know how they look like and this helps a lot.

They literally snap into the frame. I bought mine from from either ebay or GM Parts direct.

The problem is that I knew what I needed, but all the parts images for that number show a generic part which looks completely different.

Finally I just ordered the number and hoped for the best and they were correct.

larry_g · 12-17-2017, 09:24 AM

Resurrecting an older thread here. Been thinking about adding a belly pan to my 2014 1LE daily driver to see if it will help keep some of the road grime out of the engine compartment, did any of you notice a difference with that?

As far as aero stability, did adding the belly pan throw anything out of balance that you needed to offset?

Thanks for any input.

07-07-2016, 05:09 PM	#116
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,061	There like 3/4 inch long an maybe a 3/8 just go to Lowe an go over to the fastener section and check out there automotive hardware. 3/8 or 5/16x3/4 I think a 5/8 in length would work well to. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

07-07-2016, 08:15 PM	#118
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,061	Since his is a 2013 he'll already have the holes for the inserts which is big help.. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

07-08-2016, 04:54 AM	#119
fishcop Drives: Camaro SS Join Date: Aug 2015 Location: Germany Posts: 8	Perfect ... Thank you very much - i will have a look into these gm parts !! I am quite sure that I can order it here �� __________________ 2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits

08-09-2016, 12:45 PM	#120
fishcop Drives: Camaro SS Join Date: Aug 2015 Location: Germany Posts: 8	I found an insert nut in an online shop the picture is like this in ghe attachment - can you confirm thats the same like the insert nut? Attached Images __________________ 2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits

08-09-2016, 03:04 PM	#121
cdb95z28 Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008 Location: Johnstown, PA Posts: 3,200	No, they are steel, though if I remember correctly, this is not exactly what they look like __________________ 2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD

08-09-2016, 03:08 PM	#122
fishcop Drives: Camaro SS Join Date: Aug 2015 Location: Germany Posts: 8	perfect thank you - this helps a lot __________________ 2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits

08-09-2016, 03:16 PM	#123
HogsFan75 Drives: 2015 2SS/RS/1LE Join Date: Feb 2016 Location: NW Arkansas Posts: 334	I just installed mine on my 2015. You need 11 of the following and the bolts that screw into them. 11570215 Underbody Shield Retainer M6x1x25 I also had to trim the leading edge of the pan to get it to fit. Used a dremel

08-09-2016, 03:26 PM	#124
fishcop Drives: Camaro SS Join Date: Aug 2015 Location: Germany Posts: 8	Yes but you cant buy this here in Germany - i called some gm dealer but noone could help me - now I know how they look like and this helps a lot. __________________ 2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits

12-17-2017, 09:24 AM	#126
larry_g Drives: 2014 1SS/1LE Join Date: Nov 2015 Location: Louisville, KY Posts: 826	Resurrecting an older thread here. Been thinking about adding a belly pan to my 2014 1LE daily driver to see if it will help keep some of the road grime out of the engine compartment, did any of you notice a difference with that? As far as aero stability, did adding the belly pan throw anything out of balance that you needed to offset? Thanks for any input. Last edited by larry_g; 12-17-2017 at 12:39 PM.