Remote Start System Installation – Need Assistance - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Railcar · 06-09-2010, 04:45 PM

Has anyone installed the Remote Start System on their 2010 Camaro? I have a 1LT that does not have a remote start, and I’m looking for help in finding installation instructions for this system.

I ordered and received the “Remote Starting System” (Part # 92213216) from gmpartsdirect.com which is described as:

DESCRIPTION: Remote Starting System

2010 Camaro Remote Starting System, Factory-Enabled

Remote starting allows you to start your Camaro to let it heat up on a cold morning or cool down with air conditioning on a hot day.

2-way technology and a convenient display screen shows the vehicles current status (locked or remote-start engaged, for instance) and critical vehicle data, including tire air pressure, fuel level, odometer and theft alarm status. This fob offers greater operating range then the factory keyless entry system, and can control a second, ARSS-equipped vehicle.

Remote start package does not include remote key fob.

Below is a picture of what I received:

The only information that came with these parts has an Authorization Code and instructions that say “Instructions for installation of this part are available through GM Service Information (S.I.) within the “Accessories Manual” section specific to the vehicle for which you purchased the accessory.”

Not being able to access the “Accessories Manual” I gather that this harness runs from a control module in the dash to an antenna located by the rear view mirror. The black case above can be seen next to the rear view mirror in a picture found on the web.

Underneath this black cover I think is an antenna which I need to order and can not find the part number. I found this picture below under electrical, then Keyless entry components on gmpartsdirect.com which I think shows the antenna.

1 is described as “Receiver” and 2 is “Receiver Cover”.

I am looking for installation instructions and an antenna part number. I will need to eventually buy a key fob and have it synced to my camaro. Any help would be appreciated.

Darth Martel · 06-09-2010, 05:20 PM

I'll see what I can find tomorrow. I'll check back in to see if anybody finds anything in the meantime. But, if not, I'll see what I can dig up.

slick rick · 06-09-2010, 06:14 PM

http://www.camaro5.com/forums/showthread.php?t=63855

Quote:

Now for the real kicker. The actual Remote Start module is already installed in the vehicle. It is in the dashboard! The Remote Start (P/N: 92213216) 'module' that I purchased is actually an extension wire harness and a plastic case for the module in the dashboard. These are needed to move the actual module from the dashboard to the top of the windshield, just right of the rear view mirror. The Tech told me that the module needs to be moved to extend the range of the transmitter. So you are paying $115.00 for a little wire harness, a small plastic case and four tye wraps.

Darth Martel · 06-10-2010, 08:28 AM

Click on the link and download this. It's a pdf.

http://www.occgamers.org/Downloads/R...rt install.pdf

Railcar · 06-10-2010, 06:52 PM

Thanks a lot Darth, just what I was looking for! I'll work on this in the next couple weeks and see if I can add this myself. Found the "SIR Disabling and Enabling" at:

http://www.camaro5.com/forums/showthread.php?p=1451070

Once again thanks for the link.

Darth Martel · 06-10-2010, 09:15 PM

no problemo... glad I can help.

It looks like a pain in the ass so good luck with it. It might not be so bad once you get to doing it but, just from glancing over the instructions, I would be hard pressed to try it myself.

Angrybird 12 · 06-30-2010, 01:45 PM

Quick question, does the new wiring harness just extend the module to the top of the windshield or is there additional connections in it that are needed to help enable the remote start. If you don;t move the module will it still work but at a reduced distance, My car is usally parked no farther than 10'-20' away when I want to remote start it, do you think it would still work at that distance?

Darth Martel · 11-23-2010, 08:10 AM

bump for members thinking about doing this with the onset of cold temps. Might be a good idea for those using their Camaro and not storing it for Winter.

Angrybird 12 · 11-23-2010, 07:53 PM

Quote:

Originally Posted by Skyman 08

Quick question, does the new wiring harness just extend the module to the top of the windshield or is there additional connections in it that are needed to help enable the remote start. If you don;t move the module will it still work but at a reduced distance, My car is usally parked no farther than 10'-20' away when I want to remote start it, do you think it would still work at that distance?

Anyone got an answer to my question?

xx_ED_xx · 12-03-2010, 04:02 PM

now if i could have it on an m6 car and my truck m6 as well

camaro guy · 12-03-2010, 04:23 PM

Quote:

Originally Posted by xx_ED_xx

now if i could have it on an m6 car and my truck m6 as well

you can get an aftermarket Viper remote start for our M6

Angrybird 12 · 12-03-2010, 06:21 PM

Quote:

Originally Posted by GMParts

Yes,it will,did this to my 2011 1SS,works fine for me decent distance too!!

Cool, thanks

nbrugal · 12-04-2010, 04:52 PM

The install actually dosn't look that bad, but I'm confused about what happens after the remote start is relocated. So I go to my dealer and order a key FOB with a remote start button, then what? Do I have to have program uploaded or will it automatically work?

nbrugal · 12-04-2010, 05:46 PM

so once installed and a new key FOB is ordered do I have to get the vehicle programmed at the dealer?

06-09-2010, 04:45 PM	#1
Railcar Blazer Drives: 2010 Camaro Join Date: Oct 2009 Location: Portland Posts: 29	Remote Start System Installation – Need Assistance Has anyone installed the Remote Start System on their 2010 Camaro? I have a 1LT that does not have a remote start, and I’m looking for help in finding installation instructions for this system. I ordered and received the “Remote Starting System” (Part # 92213216) from gmpartsdirect.com which is described as: DESCRIPTION: Remote Starting System 2010 Camaro Remote Starting System, Factory-Enabled Remote starting allows you to start your Camaro to let it heat up on a cold morning or cool down with air conditioning on a hot day. 2-way technology and a convenient display screen shows the vehicles current status (locked or remote-start engaged, for instance) and critical vehicle data, including tire air pressure, fuel level, odometer and theft alarm status. This fob offers greater operating range then the factory keyless entry system, and can control a second, ARSS-equipped vehicle. Remote start package does not include remote key fob. Below is a picture of what I received: The only information that came with these parts has an Authorization Code and instructions that say “Instructions for installation of this part are available through GM Service Information (S.I.) within the “Accessories Manual” section specific to the vehicle for which you purchased the accessory.” Not being able to access the “Accessories Manual” I gather that this harness runs from a control module in the dash to an antenna located by the rear view mirror. The black case above can be seen next to the rear view mirror in a picture found on the web. Underneath this black cover I think is an antenna which I need to order and can not find the part number. I found this picture below under electrical, then Keyless entry components on gmpartsdirect.com which I think shows the antenna. 1 is described as “Receiver” and 2 is “Receiver Cover”. I am looking for installation instructions and an antenna part number. I will need to eventually buy a key fob and have it synced to my camaro. Any help would be appreciated.

06-30-2010, 01:45 PM	#7
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	Quick question, does the new wiring harness just extend the module to the top of the windshield or is there additional connections in it that are needed to help enable the remote start. If you don;t move the module will it still work but at a reduced distance, My car is usally parked no farther than 10'-20' away when I want to remote start it, do you think it would still work at that distance? __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remote Start	BlackCamaro	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	19	04-16-2010 04:04 PM
Does anyone have an L99 1SS with Automatic Start?	SamIyam	5th Gen Camaro SS LS LT General Discussions	29	02-25-2010 04:58 PM
Remote Start Available for the Manual Tranny?	Rodrunner	5th Gen Camaro SS LS LT General Discussions	36	12-30-2008 10:35 AM
Remote Start	l008com	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	34	11-18-2008 03:19 PM

06-09-2010, 05:20 PM	#2
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	I'll see what I can find tomorrow. I'll check back in to see if anybody finds anything in the meantime. But, if not, I'll see what I can dig up.

06-10-2010, 08:28 AM	#4
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	Click on the link and download this. It's a pdf. http://www.occgamers.org/Downloads/R...rt install.pdf

06-10-2010, 06:52 PM	#5
Railcar Blazer Drives: 2010 Camaro Join Date: Oct 2009 Location: Portland Posts: 29	Thanks a lot Darth, just what I was looking for! I'll work on this in the next couple weeks and see if I can add this myself. Found the "SIR Disabling and Enabling" at: http://www.camaro5.com/forums/showthread.php?p=1451070 Once again thanks for the link.

06-10-2010, 09:15 PM	#6
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	no problemo... glad I can help. It looks like a pain in the ass so good luck with it. It might not be so bad once you get to doing it but, just from glancing over the instructions, I would be hard pressed to try it myself.

11-23-2010, 08:10 AM	#8
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	bump for members thinking about doing this with the onset of cold temps. Might be a good idea for those using their Camaro and not storing it for Winter.

12-03-2010, 04:02 PM	#10
xx_ED_xx Drives: 04 Silverado Join Date: Jun 2010 Location: Floriduh! Posts: 1,113	now if i could have it on an m6 car and my truck m6 as well

12-04-2010, 04:52 PM	#13
nbrugal Drives: 2011 Camaro 1LT Join Date: Nov 2010 Location: Memphis, TN Posts: 7	The install actually dosn't look that bad, but I'm confused about what happens after the remote start is relocated. So I go to my dealer and order a key FOB with a remote start button, then what? Do I have to have program uploaded or will it automatically work?

12-04-2010, 05:46 PM	#14
nbrugal Drives: 2011 Camaro 1LT Join Date: Nov 2010 Location: Memphis, TN Posts: 7	so once installed and a new key FOB is ordered do I have to get the vehicle programmed at the dealer?