The V6 Lounge - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroC-17 · 01-17-2013, 09:19 PM

Good evening V6 nation! What's going on?!

Sent from my DROID RAZR using Tapatalk 2

kjkjr27 · 01-17-2013, 09:52 PM

Nm waiting to get payed tomorrow so I can buy a mod haha!

lscamaro · 01-17-2013, 09:54 PM

Debating on whether to get wheels at a killer deal or nitrous and a few other things for my baby...

ChadG · 01-18-2013, 11:45 AM

Quote:

Originally Posted by --Magic--

Thought I may share some pics with you guys. These pics were were taken sometime last summer.

Is that your house!?!? Super nice!

--Magic-- · 01-18-2013, 12:53 PM

Oh no hehe. It's a local museum surrounded by woods and and little lake. I just wish that my car didnt have that fugly license plate mount in the front.

kjkjr27 · 01-18-2013, 06:38 PM

Well ended up buying a plenum spacer...good idea? bad idea?

Lil' Nasty · 01-18-2013, 06:41 PM

Quote:

Originally Posted by kjkjr27

Well ended up buying a plenum spacer...good idea? bad idea?

I say good, made my acceleration easier and the idle a little smoother...damn long tubes

kjkjr27 · 01-18-2013, 06:44 PM

Quote:

Originally Posted by Lil' Nasty

I say good, made my acceleration easier and the idle a little smoother...damn long tubes

Didn't know you had one but glad to hear it wasn't a waste lol....not gonna lie I love this thread. Now I can ask all the stupid questions I want without starting a whole new thread about it lol.

Lil' Nasty · 01-18-2013, 07:08 PM

Quote:

Originally Posted by kjkjr27

Didn't know you had one but glad to hear it wasn't a waste lol....not gonna lie I love this thread. Now I can ask all the stupid questions I want without starting a whole new thread about it lol.

Hahahahaha check out my sig bro

but I think it's a good mod, like I said

kjkjr27 · 01-18-2013, 07:13 PM

Quote:

Originally Posted by Lil' Nasty

Hahahahaha check out my sig bro

but I think it's a good mod, like I said

Lol I did after your first post. I usually have a motto, if there are more than 5 words I don't read lol

Botoasy · 01-20-2013, 02:48 PM

still having problems with my elite catch can, could some1 tell me how to connect the houses. on the factory system does the tube come off of the elbows the go into the intake and from the engine or do I need to cut the hoses off.

CamaroC-17 · 01-20-2013, 03:43 PM

Quote:

Originally Posted by Botoasy

still having problems with my elite catch can, could some1 tell me how to connect the houses. on the factory system does the tube come off of the elbows the go into the intake and from the engine or do I need to cut the hoses off.

You do not have to remove the tube from the valve cover. Simply cut the tube in half as shown in the 1st picture. Then where the tube comes out of the intake manifold cut it just a few inches from the elbow that enters the manifold (2nd picture). Now the tube that comes out of the rear passenger valve covers connects to top of the catch can with the supplied 90 degree elbow. The tube that comes out of the intake manifold connects to other hole on the catch can
Simple. Now your CC may be attached to the radiator. Mine is on the other side so don't let it confuse you. Elite just now started sending out the new mount.

Where you cut the stock tube is where you connect the supplied ribber hose

Sent from my DROID RAZR using Tapatalk 2

Botoasy · 01-20-2013, 04:18 PM

thank you, I figured thats what I had to do is cut. But i didnt want to if there was another way.

CamaroC-17 · 01-21-2013, 08:56 AM

So this is what is in my catch can after 46 miles. Its like tanish water with a slimy residue

Sent from my DROID RAZR using Tapatalk 2

01-17-2013, 09:52 PM	#170
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Nm waiting to get payed tomorrow so I can buy a mod haha! __________________ Twitch Youtube

01-17-2013, 09:54 PM	#171
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Debating on whether to get wheels at a killer deal or nitrous and a few other things for my baby... __________________ Click Picture for Build Thread

01-18-2013, 06:38 PM	#174
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Well ended up buying a plenum spacer...good idea? bad idea? __________________ Twitch Youtube

01-21-2013, 08:56 AM	#182
CamaroC-17 Formerly Camaroc5 Drives: 2010 Camaro LT/RS M6 Join Date: May 2010 Location: USA Posts: 1,647	So this is what is in my catch can after 46 miles. Its like tanish water with a slimy residue Sent from my DROID RAZR using Tapatalk 2 Attached Images

01-17-2013, 09:19 PM	#169
CamaroC-17 Formerly Camaroc5 Drives: 2010 Camaro LT/RS M6 Join Date: May 2010 Location: USA Posts: 1,647	Good evening V6 nation! What's going on?! Sent from my DROID RAZR using Tapatalk 2

01-18-2013, 12:53 PM	#173
--Magic-- Drives: like a granny Join Date: Sep 2012 Location: CT Posts: 17	Oh no hehe. It's a local museum surrounded by woods and and little lake. I just wish that my car didnt have that fugly license plate mount in the front.

01-20-2013, 02:48 PM	#179
Botoasy Drives: 2015 RRM 1LE Join Date: Dec 2011 Location: Blackwood, New Jersey Posts: 446 View My Garage	still having problems with my elite catch can, could some1 tell me how to connect the houses. on the factory system does the tube come off of the elbows the go into the intake and from the engine or do I need to cut the hoses off.

01-20-2013, 04:18 PM	#181
Botoasy Drives: 2015 RRM 1LE Join Date: Dec 2011 Location: Blackwood, New Jersey Posts: 446 View My Garage	thank you, I figured thats what I had to do is cut. But i didnt want to if there was another way.