PQs Camaro [COTW 9/20/10] - Page 264 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PQ · 07-12-2012, 05:20 PM

Quote:

Originally Posted by SSE 4 2SS

Why Ima stomp a mudhole in that geckos backside when I see im for not giving you a new windshield...

Darth_Emma · 07-12-2012, 05:21 PM

PQ:
I had the shop put a brand new windshield in my car. I think the one they took out is still sitting at the glass shop (I can check on it if you'd like). You can have it if you want it. Stop in Columbus before the fest and have them put it in.

*SSE 4 2SS* · 07-12-2012, 05:25 PM

There you go Pq...

Cool Deal DE..

Darth_Emma · 07-12-2012, 09:57 PM

Quote:

Originally Posted by SSE 4 2SS

There you go Pq...

Cool Deal DE..

I'll try to confirm that they still have the windshield. They should also have the rear window. Not sure what they'd charge to put it in your car though. I'll see what I can find out. It might be Monday because the mechanic working on my car won't be in tomorrow.

dianeokie · 07-12-2012, 10:24 PM

Quote:

Originally Posted by stieger

Nah - PQ cracked his windshield ages ago and has never gotten around to getting it fixed. He just learned that Indy probably won't let him race with a cracked windshield. So PQ looked up how much a new windshield costs - he's not happy about how much a new windshield costs.

You know I was really trying to picture what he had done this time...............

Quote:

Originally Posted by Darth_Emma

I'll try to confirm that they still have the windshield. They should also have the rear window. Not sure what they'd charge to put it in your car though. I'll see what I can find out. It might be Monday because the mechanic working on my car won't be in tomorrow.

Camaro 5 brothers and sisters are awesome!

PQ · 07-12-2012, 10:31 PM

Quote:

Originally Posted by Darth_Emma

I'll try to confirm that they still have the windshield. They should also have the rear window. Not sure what they'd charge to put it in your car though. I'll see what I can find out. It might be Monday because the mechanic working on my car won't be in tomorrow.

PQ · 07-12-2012, 10:34 PM

Well did the gauges earlier. Drove the car with it open so I could be sure that the speed needle was accurate.

Finally got rid of my electrical tape bushing inserts too.

BUT, I broke a bolt off in the car to the sway bar bracket.

So I'll tap it out tomorrow and finish it. Always something.

PQ · 07-13-2012, 01:00 AM

Ok folks.

LOTS of typos. But you get the point.

If I had to do it again I could do it in 15 minutes. Really quick and easy.

EDIT: I forgot to put a step for making sure you plug it in before you make the final install.

Name: DSC00014.JPG
Views: 955
Size: 74.3 KB

Name: DSC00014.JPG
Views: 955
Size: 74.3 KB

Name: DSC00015.JPG
Views: 979
Size: 225.7 KB

Name: DSC00016.JPG
Views: 981
Size: 224.0 KB

Name: DSC00017.JPG
Views: 924
Size: 140.7 KB

Name: DSC00018.JPG
Views: 843
Size: 236.8 KB

Name: DSC00020.JPG
Views: 861
Size: 158.0 KB

Name: DSC00024.JPG
Views: 844
Size: 253.8 KB

Name: DSC00025.JPG
Views: 913
Size: 230.1 KB

Name: DSC00027.JPG
Views: 902
Size: 233.1 KB

Name: DSC00028.JPG
Views: 937
Size: 208.4 KB

Name: DSC00029.JPG
Views: 920
Size: 236.9 KB

Name: DSC00031.JPG
Views: 906
Size: 206.7 KB

Name: DSC00032.JPG
Views: 841
Size: 216.3 KB

Name: DSC00033.JPG
Views: 902
Size: 232.1 KB

Name: DSC00035.JPG
Views: 916
Size: 199.9 KB

Name: DSC00036.JPG
Views: 860
Size: 157.7 KB

Name: DSC00037.JPG
Views: 968
Size: 249.5 KB

Name: DSC00043.JPG
Views: 1136
Size: 208.3 KB

Name: DSC00044.JPG
Views: 1143
Size: 205.3 KB

Name: DSC00045.JPG
Views: 909
Size: 313.7 KB

Name: DSC00046.JPG
Views: 938
Size: 252.6 KB

Name: DSC00047.JPG
Views: 832
Size: 196.6 KB

Name: DSC00049.JPG
Views: 895
Size: 171.0 KB

Name: DSC00050.JPG
Views: 898
Size: 187.0 KB

Name: DSC00057.JPG
Views: 915
Size: 102.4 KB

Name: DSC00067.JPG
Views: 902
Size: 162.7 KB

Name: DSC00068.JPG
Views: 933
Size: 189.4 KB

Name: DSC00073.JPG
Views: 838
Size: 256.7 KB

Name: DSC00074.JPG
Views: 896
Size: 230.0 KB

Name: DSC00075.JPG
Views: 839
Size: 207.9 KB

Name: DSC00076.JPG
Views: 984
Size: 255.0 KB

Name: DSC00077.JPG
Views: 904
Size: 204.7 KB

Name: DSC00078.JPG
Views: 945
Size: 270.9 KB

*mlee* · 07-13-2012, 01:06 AM

Keep this up and we'll have to move your Journal thread to the DIY section..

PQ · 07-13-2012, 01:10 AM

Well, I can do a DIY on how to get a broke of bolt in the sway bar bracket hole.

Should come out pretty easy with a drill bit and easy out. Guess I don't know my own strength. hahaha

*mlee* · 07-13-2012, 01:22 AM

Quote:

Originally Posted by PQ

Well, I can do a DIY on how to get a broke of bolt in the sway bar bracket hole.

Should come out pretty easy with a drill bit and easy out. Guess I don't know my own strength. hahaha

Too much ugggghhhhhhhhh... tone it back to ugghhh next time.

hrpiii · 07-13-2012, 06:16 AM

Looks awesome PQ, very good work and must say, very very sharp interior with the new look for the gauges.

pierre777 · 07-13-2012, 06:57 AM

great work man ,very precise

,i say it's so good you should make a DIY out of it.

Dr Jkel · 07-13-2012, 07:16 AM

Dude you never cease to amaze me......these look great.

07-12-2012, 05:25 PM	#3685
SSE 4 2SS Boosted Moderator Drives: Bone Stock LS3 Join Date: Sep 2009 Location: Marion Tx Posts: 15,492	There you go Pq... Cool Deal DE.. __________________ If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough...

07-12-2012, 10:34 PM	#3689
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Well did the gauges earlier. Drove the car with it open so I could be sure that the speed needle was accurate. Finally got rid of my electrical tape bushing inserts too. BUT, I broke a bolt off in the car to the sway bar bracket. So I'll tap it out tomorrow and finish it. Always something. __________________

07-13-2012, 01:00 AM	#3690
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Ok folks. LOTS of typos. But you get the point. If I had to do it again I could do it in 15 minutes. Really quick and easy. EDIT: I forgot to put a step for making sure you plug it in before you make the final install. __________________ Last edited by PQ; 07-13-2012 at 09:48 AM.

07-13-2012, 01:06 AM	#3691
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,500 View My Garage	Keep this up and we'll have to move your Journal thread to the DIY section.. __________________

07-13-2012, 01:10 AM	#3692
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Well, I can do a DIY on how to get a broke of bolt in the sway bar bracket hole. Should come out pretty easy with a drill bit and easy out. Guess I don't know my own strength. hahaha __________________

07-12-2012, 05:21 PM	#3684
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	PQ: I had the shop put a brand new windshield in my car. I think the one they took out is still sitting at the glass shop (I can check on it if you'd like). You can have it if you want it. Stop in Columbus before the fest and have them put it in.

07-13-2012, 06:16 AM	#3694
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,529	Looks awesome PQ, very good work and must say, very very sharp interior with the new look for the gauges.

07-13-2012, 06:57 AM	#3695
pierre777 HT5 COTW 9/3/2012 Drives: Cyber Bullet Join Date: Jun 2011 Location: lebanon Posts: 4,555 View My Garage	great work man ,very precise ,i say it's so good you should make a DIY out of it. __________________

07-13-2012, 07:16 AM	#3696
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	Dude you never cease to amaze me......these look great.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 05:33 PM