run fog halos w/ drl??? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CyberBri · 08-31-2012, 09:48 AM

I just got the fog halo kit for my car!! what do i need to run the fog light halo and the top halos?? also what plasma bulb do i need to install in the fog lights to make them match the top? i have the aac halo...I heard there was a drl harness or something but i do not see it on their web site!!!!

2SSRS@Gen5diy · 08-31-2012, 10:01 AM

Your bulbs are p13w for your 2010 car, and all you do is t-tap to the 2 outside wires on the upper RS headlight connector, one will be black and its the ground and the other is PU, good luck, and if you want a DRL harness go to the sit below.

CyberBri · 08-31-2012, 11:32 AM

Quote:

Originally Posted by 2SSRS

Your bulbs are p13w for your 2010 car, and all you do is t-tap to the 2 outside wires on the upper RS headlight connector, one will be black and its the ground and the other is PU, good luck, and if you want a DRL harness go to the sit below.

but how do i make so i can run with just the top and bottom halo`s on??
I dont want to always have to have the headlights on with the top halo

The Stig · 08-31-2012, 11:42 AM

Wire the fog halos up to your front side markets.

CyberBri · 08-31-2012, 11:53 AM

Quote:

Originally Posted by stieger

Wire the fog halos up to your front side markets.

then when the headlights are one will the drls be on as well??

what i want to accomplish is be able to run just the two sets of halos in the day.
Also at night i want to run the drl fog lights and halos with the headlights on.Is this possible???

2SSRS@Gen5diy · 08-31-2012, 11:53 AM

Quote:

Originally Posted by CyberBri

but how do i make so i can run with just the top and bottom halo`s on??
I dont want to always have to have the headlights on with the top halo

The 2 wires are not the headlight but the running lights same a stieger said, and all you do is turn your headlight switch one click for the running lights to come on.

2SSRS@Gen5diy · 08-31-2012, 11:55 AM

Quote:

Originally Posted by CyberBri

then when the headlights are one will the drls be on as well??

what i want to accomplish is be able to run just the two sets of halos in the day.
Also at night i want to run the drl fog lights and halos with the headlights on.Is this possible???

So you dont want the DRL's on in the day time?

CyberBri · 08-31-2012, 01:59 PM

not the actual fog light bulb... is there any way to control the halo and the buld in the fog light seperately???

FwyFlyer · 08-31-2012, 08:39 PM

Quote:

Originally Posted by CyberBri

not the actual fog light bulb... is there any way to control the halo and the buld in the fog light seperately???

I have built custom harnesses for literally hundreds of members here on C5. PM me with your specific needs and I will work with you to ensure your 100% satisfaction.

Sirwestofash · 08-31-2012, 11:57 PM

Quote:

Originally Posted by 2SSRS

Your bulbs are p13w for your 2010 car, and all you do is t-tap to the 2 outside wires on the upper RS headlight connector, one will be black and its the ground and the other is PU, good luck, and if you want a DRL harness go to the sit below.

I have a 2011 1LT are the P13w's the ones i need to make my fog lights match my newly installed HID's too?

Not trying to thread jack just was curious myself!!

2SSRS@Gen5diy · 09-01-2012, 08:51 AM

Quote:

Originally Posted by Sirwestofash

I have a 2011 1LT are the P13w's the ones i need to make my fog lights match my newly installed HID's too?

Not trying to thread jack just was curious myself!!

If you have a RS car yes, if you dont have a RS then its a 5202 bulb.

CyberBri · 09-01-2012, 10:29 AM

I want to be bale to drive with just both sets of halo`s on by themselves. and i want to be able to drive at night with the drl and halo on...

Sirwestofash · 09-01-2012, 11:09 AM

Quote:

Originally Posted by 2SSRS

If you have a RS car yes, if you dont have a RS then its a 5202 bulb.

Are any harnesses needed for 5202?

snaphappy · 09-01-2012, 11:59 AM

Currently I have my DRL's wired to my sidemarkers. So when the the DRL's turn on automatically, so do the Halos around my headlights.

I wrote about the wiring process here: http://www.camaro5.com/forums/showthread.php?t=240590

When I order the the Halo DRl's from AAC I plan on using them only as Halos. As far as I know, if I leave the factory bulb out, then the DRL's will simply be Halos. And since my DRL's are wired to the sidemarkers I should have two sets of Halos that turn on automatically.

08-31-2012, 09:48 AM	#1
CyberBri BRUCE WAYNES DD Drives: 2010 2SS/RS CGM Join Date: Dec 2011 Location: wilmington NC Posts: 511	run fog halos w/ drl??? I just got the fog halo kit for my car!! what do i need to run the fog light halo and the top halos?? also what plasma bulb do i need to install in the fog lights to make them match the top? i have the aac halo...I heard there was a drl harness or something but i do not see it on their web site!!!! __________________ JBA 1 7/8 LT`s, High flow mids, and Cat back,Airaid intake, JRE Tune, & alot of flat black....

08-31-2012, 11:42 AM	#4
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Wire the fog halos up to your front side markets. __________________

08-31-2012, 01:59 PM	#8
CyberBri BRUCE WAYNES DD Drives: 2010 2SS/RS CGM Join Date: Dec 2011 Location: wilmington NC Posts: 511	not the actual fog light bulb... is there any way to control the halo and the buld in the fog light seperately??? __________________ JBA 1 7/8 LT`s, High flow mids, and Cat back,Airaid intake, JRE Tune, & alot of flat black....

09-01-2012, 10:29 AM	#12
CyberBri BRUCE WAYNES DD Drives: 2010 2SS/RS CGM Join Date: Dec 2011 Location: wilmington NC Posts: 511	I want to be bale to drive with just both sets of halo`s on by themselves. and i want to be able to drive at night with the drl and halo on... __________________ JBA 1 7/8 LT`s, High flow mids, and Cat back,Airaid intake, JRE Tune, & alot of flat black....

08-31-2012, 10:01 AM	#2
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	Your bulbs are p13w for your 2010 car, and all you do is t-tap to the 2 outside wires on the upper RS headlight connector, one will be black and its the ground and the other is PU, good luck, and if you want a DRL harness go to the sit below.

09-01-2012, 11:59 AM	#14
snaphappy Drives: 2011 Camaro Convertible SS2/RS LS3 Join Date: Jun 2012 Location: Olive Branch, Ms Posts: 742	Currently I have my DRL's wired to my sidemarkers. So when the the DRL's turn on automatically, so do the Halos around my headlights. I wrote about the wiring process here: http://www.camaro5.com/forums/showthread.php?t=240590 When I order the the Halo DRl's from AAC I plan on using them only as Halos. As far as I know, if I leave the factory bulb out, then the DRL's will simply be Halos. And since my DRL's are wired to the sidemarkers I should have two sets of Halos that turn on automatically.