Yard Sale (stock wheels, tires, side skirts, x pipe, hood, bumper etc)

[Aequitas & Veritas]

Howdy, I need to get rid of my take off parts and make room in my garage. I would prefer to do local pick up on the big things but can try to ship if need be. I do not have a way to move the Hood/Bumper. I'm located in Leavenworth, Kansas just north of Kansas City.

All prices are obo since I needed to put prices on things, so offer up. Most likely I will say yes since I just want this stuff gone, if it doesn't sell it'll most likely get tossed.

I bought the following for $250 shipped and will do the same as I did not use this and do not need to profit off of this.

Pedders 27mm rear Swaybar, bushings and bracket
Pedders 32mm rear Swaybar, bushings and OE bracket
Pedders old style endlinks with 12mm studs on both ends.





Brand new BMR end links, never installed. Only opened the box to take some photos. I purchased to go with the above bars. $40 shipped



X-Pipe $80 shipped



2010 Midnight Silver RS Wheels with 245/40/20 and 275/35/20 General GMax tires with 17,000 miles on three and 3,000 on the front right. It was replaced because a tire had a bulge after a curb hit. And I went with a wider wheel/tire set up on my car. They do include Tire Sensors and the OEM lug nuts with one locking lug per wheel. Also have very minor curb rash that the Plasti Dip covers up but the white is old and does need to be recoated. If I have time I will be peeling the PlastiDip off. $750 shipped

















Pirelli Pzero 245/45/ZR20 has less than 30 miles on it. I had a tire blowout and this was the replacement. After that I replaced all 4 and kept this one because it was basically brand new. $90 shipped Shipping is about $40-60 so basically the tire is $40-50 a steal compared to the $200+ on tirerack.com







V6 RS IOM full front bumper with upper and lower grill as well as DRLs $250

IOM OEM rockers, small chips where the tape from the Havoc skirts peeled $50

IOM stock hood with white stock stripes $250





Up for sale is a set of painted IOM Havoc Side Skirts. They were painted by Gary from Gary’s Customz. They are in excellent shape, the paint is a 100% match to IOM, and they look excellent. They were only on my Camaro for 3,000 miles, no chips of any kind.

No drilling required! They install over the OEM rocker panels with 3M Automotive Tape and 5 pushpins in the bottom.

Some of the push pins that came with it were a little bent. However I will be including a brand new set of these!

I know RPI sells them painted for $800 shipped. But I’ve heard mix reviews about their paint matching on the outside. Get these here that were painted by Gary, who did a wonderful job. And for less than RPI is selling them.

$490 shipped. I’ll be spending near $100 to ship them because of their size and to keep them protected.

Here are the photos. There are a few glares that look like smudges but those are just glares. My apartment is really dark and it was cloudy outside so I did my best to capture the orange color. And I included a photo of what they looked like on my car (*car not included).

Thanks for looking!











Stock suspension pieces, make offers. Just wanted to see if anyone wanted any of this before I trashed it. Let me know.

[HotelCali]

interested in xpipes ..but first what do they do? and can they go on a 2013

[45thCamaro]

You have some great stuff for sale. Best of luck.

[Aequitas & Veritas]

Originally Posted by HotelCali

interested in xpipes ..but first what do they do? and can they go on a 2013

They eliminate rasp which is generally caused by aftermarket exhausts and headers. Yes they work on all models as the exhaust did not change. I just chose to not install it. There is a lot of more detailed information on this form as a lot of people install these.

Originally Posted by 45thCamaro

You have some great stuff for sale. Best of luck.

Thanks, hopefully someone in the KC area can take some of the bigger things off of my hands.

[TwentyTen2SSRS]

Those BMR end links fit their SB039 sways?

[Aequitas & Veritas]

Originally Posted by TwentyTen2SSRS

Those BMR end links fit their SB039 sways?

I am not 100% sure which sways they do or do not fit. I would assume so as they are both BMR.

I would ask Tyler at JDP (my go to guy for all my parts) or one of the BMR reps on here.

[K1SSRSS]

These are the factory parts I would like. Thanks.

[mpiersd]

Where are you in Kansas? I have family in 2 corners(Leavenworth & Pittsburgh) that could possibly do a local pick up for me.

[spadz93]

Willing to split the wheels? looking for the rears. perfect tire match for me too!

[Aequitas & Veritas]

Originally Posted by K1SSRSS

These are the factory parts I would like. Thanks.

Awesome, I will get them boxed up today and sent your way tomorrow.

Originally Posted by mpiersd

Where are you in Kansas? I have family in 2 corners(Leavenworth & Pittsburgh) that could possibly do a local pick up for me.

Sent a pm your way.

Originally Posted by spadz93

Willing to split the wheels? looking for the rears. perfect tire match for me too!

Not quite at this time but may be willing too. What is your timeframe? Only trying to move everything at once since I just re-listed everything a few days ago.

Thanks for the interest though!

[spadz93]

no particular rush, just trying to go square is all

[Aequitas & Veritas]

Originally Posted by spadz93

no particular rush, just trying to go square is all

Gotcha, if they do not sell by Mid May they will probably be yours if you still want them. Just trying to move my stuff

[spadz93]

yeah, i'd say within a month i'll be knocking on your inbox

[Aequitas & Veritas]

OEM LCAs and cradle mounts sold.

Pedders 32mm rear sway pending.