What's your personal ET goals/plans. - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pro Stock John · 02-15-2014, 11:50 AM

Quote:

Originally Posted by 62nalide

All I want to do is hurt some of these cammed guys on here saying a "Bolt-On" car can't do this or that (oh oh shots fired

). I'm a heavy set guy and getting on a diet just to hit my goals

, ok after the popcorn i'll diet.

Yeah me too.

Personally I really want to do an 11.8 on drag radials. But for sure 10.9x H/C.

62nalide · 02-15-2014, 03:14 PM

Quote:

Originally Posted by Pro Stock John

Yeah me too.

Personally I really want to do an 11.8 on drag radials. But for sure 10.9x H/C.

You already have that in the pocket

dekan513 · 02-15-2014, 04:19 PM

i traded my car for a vette after the tracks closed. i was hoping to run 10's all motor. ran a 11.6 with a 1.87 60' @119 car trapped a bit more tho that was off the trailer didnt make no more passes as a truck wreaked and we left . put in a clutch and was waiting for the track to open back up. but found a vette that i liked at a price i liked. so i switched. i wished i would have keep it for a few mmore months to see if icould get in the 10's on motor.

hoping for 10.5 cam only in the vette and 9.99 on a 150 shot. then ill adjust my goal after that on nitrous

Neumatic · 02-15-2014, 04:43 PM

Shooting for mid-10's. As long as the car stays together Ill be happy though lol.

Motion427 · 02-15-2014, 06:31 PM

Quote:

Originally Posted by Neumatic

Shooting for mid-10's. As long as the car stays together Ill be happy though lol.

Same here.As fast it can go,but can drive it back home in one piece.

Bad70supreme · 02-15-2014, 07:35 PM

Quote:

Originally Posted by 62nalide

All I want to do is hurt some of these cammed guys on here saying a "Bolt-On" car can't do this or that (oh oh shots fired

). I'm a heavy set guy and getting on a diet just to hit my goals

, ok after the popcorn i'll diet.

Sound like fightin words to me! Bring that big pig to chi town this spring, Ill show you how it's done! Lmfao

Cat988h · 02-15-2014, 08:00 PM

11.70 with cam and gears,is what I hope to see this summer. I don't think that is asking too much.

62nalide · 02-15-2014, 08:00 PM

Quote:

Originally Posted by Bad70supreme

Sound like fightin words to me! Bring that big pig to chi town this spring, Ill show you how it's done! Lmfao

It'll be in Rhino79's hands by then but if your welling to pay for my ticket and car to be shipped over sure

Jchaluja · 02-15-2014, 08:43 PM

I accomplished mid 10's on orignal 20's with nittos drag radials driving to the track 2 hours away, now, I just want to run hard and pray I don't break anything, my pocket is hurting....maybe I'll chase 9.99 this year...we'll see how it runs at pony wars!

I am having a lot of fun driving my car daily with my new 4L80!

Bad70supreme · 02-15-2014, 09:06 PM

Just a question. Your car setup, was it thought out and parts picked by yourself, worked on by you?

62nalide · 02-15-2014, 09:56 PM

Quote:

Originally Posted by Bad70supreme

Just a question. Your car setup, was it thought out and parts picked by yourself, worked on by you?

Yes done by me 5th car build I've done

I did do research before I did anything to it.

Bad70supreme · 02-15-2014, 10:24 PM

Quote:

Originally Posted by 62nalide

Yes done by me 5th car build I've done

I did do research before I did anything to it.

Sounds good, was gonna have to start bustin your balls! Lol

All in all I hope your reach your goals, I am damn proud of what some guys have done. Camaro community needed it, we were getting a bad rep for bit. I was taking all kinds of crap on tech when I got my 5th gen! Fat pig, should have stuck with a 4th gen... Vids posted on 5th gen kills... Was getting to be to much. I knew I would get my car to run well, and in the right hands these things would start whopping some aZZ.

BEASSTING · 02-15-2014, 11:19 PM

Quote:

Originally Posted by Mr. Nasty

I have a lot of work to do after the mod to get it dialed in. The car ran crazy on the first 4 passes a 10.46 10.57 10.38 10.49

it was all over the place on times. So cut the meth off 2 passes at 10.45 that better their the same. Cut the meth back on and 2 passes at 10.38 . I think when I get it dialed in their should be some low 10.30 and maybe high 10.20

I did make a new PB with the 10.38

Awesome! I don't think you'll have any problems hitting that number! At the rate you're going you'll be in the 9's before you know it. How was the track? What'd you 60 on that 10.38 pass?

Quote:

Originally Posted by Motion427

Same here.As fast it can go,but can drive it back home in one piece.

x1000. I want a trailer, but at the same time. I'm like people break axles, trans, etc on the street too? I'd prefer it not be 2hrs from home though!

Quote:

Originally Posted by 62nalide

Yes done by me 5th car build I've done

I did do research before I did anything to it.

I don't think I've owned 5 cars, lol!

Bad70supreme · 02-15-2014, 11:41 PM

Sh$t I picked up number 14! 96 z71, always wanted this truck!

02-15-2014, 04:19 PM	#31
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	i traded my car for a vette after the tracks closed. i was hoping to run 10's all motor. ran a 11.6 with a 1.87 60' @119 car trapped a bit more tho that was off the trailer didnt make no more passes as a truck wreaked and we left . put in a clutch and was waiting for the track to open back up. but found a vette that i liked at a price i liked. so i switched. i wished i would have keep it for a few mmore months to see if icould get in the 10's on motor. hoping for 10.5 cam only in the vette and 9.99 on a 150 shot. then ill adjust my goal after that on nitrous __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

02-15-2014, 08:00 PM	#35
Cat988h Drives: Rally yellow 2011 Camaro 1SSRS Join Date: Apr 2012 Location: Parksville Bc Posts: 263 View My Garage	11.70 with cam and gears,is what I hope to see this summer. I don't think that is asking too much. __________________ ATI Super Damper, Katech C5R Chain, Jannetty 470 Comp Cam, Comp Valve Springs, Mellings Oil Pump, Manley Push Rods, Comp Tringion Upgrade, Cold Air Inductions Intake, 1-7/8 American Racing Headers w Cats, MBRP 3 Inch Exhaust, RX Catch Can, Eaton Tru Trac, 3.91 OEM, DSS Drive And Half Shafts, LPW Diff Cover,3 Inch Noweeds, Amsoil Z-Rod, Tuned by Jannetty Racing

02-15-2014, 09:06 PM	#38
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	Just a question. Your car setup, was it thought out and parts picked by yourself, worked on by you? __________________ 10.91 at 122 H/C stock block N/A

02-15-2014, 11:41 PM	#42
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	Sh$t I picked up number 14! 96 z71, always wanted this truck! __________________ 10.91 at 122 H/C stock block N/A

02-15-2014, 04:43 PM	#32
Neumatic Drives: 2010 Camaro 2SS M6 Join Date: Oct 2011 Location: Ohio Posts: 1,448 View My Garage	Shooting for mid-10's. As long as the car stays together Ill be happy though lol.

02-15-2014, 08:43 PM	#37
Jchaluja Drives: ZL1 Camaro Join Date: Feb 2009 Location: Jacksonville, FL Posts: 1,321	I accomplished mid 10's on orignal 20's with nittos drag radials driving to the track 2 hours away, now, I just want to run hard and pray I don't break anything, my pocket is hurting....maybe I'll chase 9.99 this year...we'll see how it runs at pony wars! I am having a lot of fun driving my car daily with my new 4L80!