Treasure Coast Camaro 5 ***TCC5***

[Rencor]

2nd Place is the new "First Place"....

Originally Posted by Black11SS

Was at Extreme yesterday test fitting the hood....gonna look sweet.....then i saw Mike's car
guys, better hit as many car shows and get your trophies while his car is down.
Mike....you car is truly going to be a rolling work of art

[DesignAlot]

Is it Saturday yet??!! Kevin, how about a picture of the new panels before install?

[mikepage0007]

after i get my 1st win , i will not enter any more shows...unless there are badass supercharged and turbo mustangs that i cannot allow them to beat my brothers..i want you guys to rule, so i will try not to enter same class

[Drago77]

Mike- Tony; rough cost estimate to have your shift plate and steering wheel trim painted as you guys did???

Tom... nothing really to see... gonna sand the windows tonight, try a before/after there.... Sat; my house-11 still good?

[mikepage0007]

i think tony went with the boot, and covered his shift plate...my new auto shift plate, gary did as a pkg deal with the fenders..i would def consider getting the 2 stage paint in spray can...it would be simple and you may want to do some other stuff down the road...its like 30.00 for the base and clear coat...and you are handy..problem is 20.00 plus just for shipping both ways, and can be a little tedious...look at staples for the small black letters or make them with a razor knife...shoot the console trim white, add p-r-n-d-2-1, then add clear..2-3 coats...or more and you can wetsand the clear with some 1500 ...just some ideas...i sent gary-georges console trim/speedo/sterring wheel.also mine.i was like 130 for each set..with shipping..somewhere in that ballpark...

[Drago77]

Thanks Mike... but I mis-typed, I have the stick shift like you (did), looking to paint that entire plastic piece, including the 4 gauge cluster...

I'm not a very good painter, afraid to even try, lol!

[mikepage0007]

alright, i forgot m6..lol...what is it you want white with black stripe and steering wheel...no speedo...i,ll call gary when you know for sure..

[Drago77]

Originally Posted by mikepage0007

alright, i forgot m6..lol...what is it you want white with black stripe and steering wheel...no speedo...i,ll call gary when you know for sure..

You have a pic of your old one Mike? I'm still truing to make my mind up on the color seperation... working on getting the speedo chromed.

[mikepage0007]

here is mine

[Drago77]

Originally Posted by DesignAlot

Is it Saturday yet??!! Kevin, how about a picture of the new panels before install?

Here ya' go Tom... you asked for it!
Panels... the following pics show the paint removal process to exend the ABL all the way to the dash:

Pic #1- 4 Piece trim kit... with my yellow-ish garage lighting...

Pic #2- Close up of inside of panel, near dash- specifically, the "fabric" that helps blocks the ABL from extending to the dash

Pic #3- The fabric trimmed away to expose the needed area to sand

Pic #4- The "showing" side of the two panels, top= stock, bottom= trimmed/sanded. Note the extended "window"

Pic #5- Both panels trimmed/sanded, ready for the light pipes!!!!

[DesignAlot]

Saturday at 11is still good... Too bad i can't get the amp in too... I will need your address before Saturday.

[mikepage0007]

some new pics, new folding tag-mike fabricating some back seat panels-dynamat trunk with recessed fuel cell-front speaker layout..

[baby02]

NICE!!!!!!!!!

[BumbleBeeSS2009]

Mike - Looking GREAT!! love the oldschool license plate fold down!! speakers in the rear panels should sound nice too....

Kev- I think my shifter surround was around 75-100 bucks with a core exchange... I forgot who painted it... might be able to check through my old PMs and see.. and yes Mike I did go with the boot but instead of just "covering" my PRNDS plate I actually removed it and just replaced it with the OEM manual boot.. cleans it up better imo...