10-25-2013, 05:14 PM | #1 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
adding 1LE sways to older camaros lots of fun
has any one done this< looks like the cage hole's are smaller on the old sway bar, so now to make it work.
|
10-25-2013, 05:15 PM | #2 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
I put 1LE sways in my 2012 LS before I switched to LSR sways. No issues
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
10-25-2013, 06:32 PM | #3 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
You went from a FE4 to FE 6 parts, but us FE3 guys have smaller holes in the struts, and the studs on the front cradle that hold down the clamps are smaller
|
10-25-2013, 09:02 PM | #4 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
I went from base FE2 suspension to full OEM 1LE to A/M sways..... I replaced the struts and shocks with the 1LE stuff too, otherwise I would have had to enlarge the strut hole where the 12mm link attaches
That is the 1LE bar versus the LSR bar, the OE bar is much smaller on the FE2
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
Last edited by sycraft; 10-25-2013 at 09:21 PM. |
10-26-2013, 12:40 AM | #5 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Thanks but i have coil overs on the car so drilling is the only way, LOL, i will post pics of what i mean in the AM so you all see.
|
|
|
|
|