04-24-2014, 10:04 AM | #1 |
No Pain No Gain
Drives: Yellow 5th Gen 2SS RS Join Date: Aug 2009
Location: GA
Posts: 1,519
|
Air Compressor and Impact Gun
I need to get a bolt off of one of the front strut in the engine bay. I managed to get both off when I first installed coilovers a couple years ago, but I can't seem to get one of them off. Can't remember if I did some kind of trick or workaround to get them off. Or if it was just that easy to get the stock stuff off.
So something that can do this job and possibly remove lug nuts off of the wheels as well.
__________________
2010 2SS/RS/L99 - Headers/CAI/SWAYs/CoilOvers/Tune/Steel Braided Brake Lines/Frozen Slotted Rotors
|
04-25-2014, 08:55 PM | #2 |
Drives: 2013 2SS/RS/1LE Join Date: Apr 2010
Location: St Louis, MO
Posts: 3,087
|
Minimum 30gal, preferably a 60gal. for good torque with a quality impact gun.
See here: http://www.camaro5.com/forums/showthread.php?t=338658 |
04-27-2014, 09:19 PM | #3 |
Drives: 2015 2SS/RS Join Date: Apr 2012
Location: Southeast Louisiana
Posts: 2,112
|
Hop on eBay and get a 1/2" Snap On cordless impact. My friend has one, it busted the u bolts loose on my pickup trucks axle with zero drama. Makes lug nuts a cake walk too.
__________________
2015 Camaro 2SS/RS SIM
2016 Jeep Wrangler 2DR Willys Wheeler 1993 C1500 Single Cab Stepside 5.3L LS Swap |
04-27-2014, 10:09 PM | #4 |
No Pain No Gain
Drives: Yellow 5th Gen 2SS RS Join Date: Aug 2009
Location: GA
Posts: 1,519
|
yeah...i picked up a craftman and it did the job real easy. removed the strut nut, lug nuts for 6 wheels and took off the caliper bolts ...and it's still charged.
__________________
2010 2SS/RS/L99 - Headers/CAI/SWAYs/CoilOvers/Tune/Steel Braided Brake Lines/Frozen Slotted Rotors
|
|
|
|
|