04-30-2013, 06:11 PM | #1 |
Drives: Black 2012 ZL1 Join Date: Mar 2013
Location: Buffalo Grove
Posts: 433
|
Caliper bolt specs
I'm pulling the rear calipers so I can paint the rear rotor hats black. What are the specs to tighten them back up?
|
05-01-2013, 08:34 AM | #2 |
Perma Grinning
Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012
Location: Schaumburg, IL
Posts: 452
|
I had found 96 ft/lbs.
|
05-01-2013, 01:38 PM | #3 |
Deep Sea
Drives: 2012 Camaro ZL1 Join Date: Sep 2011
Location: Palm Beach Gardens, Fl.
Posts: 969
|
Tight as you can get them, hard to get lots of leverage so use a breaker bar and muscle them up. They have a yellow P-patch on them but once they come out most of that comes off so utilize Loc-tite blue 242.
|
05-01-2013, 02:19 PM | #4 |
Perma Grinning
Drives: 2012 Tom Henry Racing ZL1 Join Date: Feb 2012
Location: Schaumburg, IL
Posts: 452
|
Rears are 100 times easier than the fronts . . .
The front torque spec is 129 ft/lbs . . . fyi . . . |
05-01-2013, 02:26 PM | #5 |
Drives: Black 2012 ZL1 Join Date: Mar 2013
Location: Buffalo Grove
Posts: 433
|
|
|
|
|
|