01-30-2022, 12:58 PM | #1 |
Drives: 2019 zl1 6 speed Join Date: Jul 2017
Location: Lake Havasu Arizona
Posts: 979
|
Good tires
Hey guys, I raced a charger today and lost, smh, because I couldn't get traction. Spun first, quickly shifted to second, kept spinning and hit a curb with my rear tire. I'm using ps4's, what do you guys recommend to use to get traction that isn't strictly a drag tire? I'm around 490 hp and a manual. I know r888's used to be good, are they still the best? I don't want to lose like that again lol.
|
01-30-2022, 01:04 PM | #2 |
Drives: 2018 1SS 1LE Join Date: Dec 2012
Location: NY
Posts: 395
|
Save the money and practice on you’re driving.
|
01-30-2022, 01:16 PM | #3 |
Drives: 2019 zl1 6 speed Join Date: Jul 2017
Location: Lake Havasu Arizona
Posts: 979
|
I understand, but its well known ps4's are terrible for launching. So I can't practice without having the correct tire
|
01-30-2022, 01:41 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,621
|
The PS4S is only for roll racing, try Nitto 555RIIs in the rear instead if you want to launch from a dig.
Those Toyos whine like a monster truck all the time above 40 mph, which is tolerable if you don't mind, but I had to get rid of them, they went on my nerves unfortunately.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-30-2022, 04:51 PM | #5 |
Drives: 2019 zl1 6 speed Join Date: Jul 2017
Location: Lake Havasu Arizona
Posts: 979
|
Great, that's what I'm looking to hear, tyvm sir! I will check those out.
|
|
|
Post Reply
|
|
|