My dealer is offering a new spoiler - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

smokingcamaro · 06-15-2011, 06:55 AM

Has chevy put out a new spoiler, I put link on here but I do not know if I like it very much. I think it would make it look like a ricer

HookemHorns · 06-15-2011, 06:59 AM

I like the dovetail much better.

dmginc · 06-15-2011, 06:59 AM

there is a high wing spoiler, looks nice but that is just my opinion...

Neriah · 06-15-2011, 07:03 AM

Dovetail much better.

Jayrcr3 · 06-15-2011, 07:09 AM

I saw one yesterday, and ricer was the first thing that popped into my head.

v6sonoma · 06-15-2011, 07:16 AM

Quote:

Originally Posted by Jayrcr3

I saw one yesterday, and ricer was the first thing that popped into my head.

The only problem is on a Camaro it's actually functional. Where on a FWD not so much. I'd have to see a bigger picture but so far I kinda like it. Not enough to buy one.

Can't_C_Me · 06-15-2011, 07:18 AM

Yea that's the High wing spoiler AKA the T3/BumbleBee spoiler. There's a member around here with one on a yellow LLT. It requires swapping out the trunks lil air strut with one that comes with the kit. The wing is way heavier.

Tigg · 06-15-2011, 07:19 AM

I want to get the ZL1 spoiler when it becomes available.

smokingcamaro · 06-15-2011, 08:52 AM

I have a Cyber Grey Camaro, If i wanted to get one of these could since the paint is no longer available?

Darth_Emma · 06-15-2011, 09:17 AM

I just got the MPD1 spoiler. I like it.

CamaroSkooter · 06-15-2011, 09:25 AM

I want to see it installed.

I kind of like it, but for me to get one, I would have to replace the entire trunk lid, wouldn't I?

The holes for the high-wing spoiler don't match up with the holes on the SS spoiler, or am I wrong?

Moorepheus · 06-15-2011, 09:28 AM

If I didn't already have the factory spoiler on my Camaro, I would go with that High Wing Spoiler.....I like how it looks.

Moorepheus · 06-15-2011, 09:29 AM

Quote:

Originally Posted by CamaroSkooter

I want to see it installed.

I kind of like it, but for me to get one, I would have to replace the entire trunk lid, wouldn't I?

The holes for the high-wing spoiler don't match up with the holes on the SS spoiler, or am I wrong?

I think you are correct

GRYGOOS · 06-15-2011, 09:48 AM

Quote:

Originally Posted by smokingcamaro

Has chevy put out a new spoiler, I put link on here but I do not know if I like it very much. I think it would make it look like a ricer

http://www.stevemoorechevrolet.com/GMAccessories

That spoiler definately has GM lineage even though I can see how it could be construed as borrowed from the imports. See the Olds 442 spoiler for 1970 vs the 2011 Camaro, there are similarities.

06-15-2011, 06:55 AM	#1
smokingcamaro Drives: 2010 Camaro LS Join Date: Dec 2010 Location: Charlotte,NC Posts: 394 View My Garage	My dealer is offering a new spoiler Has chevy put out a new spoiler, I put link on here but I do not know if I like it very much. I think it would make it look like a ricer

06-15-2011, 06:59 AM	#3
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	there is a high wing spoiler, looks nice but that is just my opinion... __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

06-15-2011, 07:03 AM	#4
Neriah Drives: 2011 2SS/RS Join Date: May 2011 Location: Brentwood, CA Posts: 860	Dovetail much better. __________________ Built By Blu808 LG G6X3 Cam, UD Pully, Rotofab Intake. Dynatech LT's. Borla ATAK Catback. Full BMR bushings and suspension.

06-15-2011, 07:09 AM	#5
Jayrcr3 Drives: 2011 IOM 2SS/RS Join Date: Dec 2010 Location: Chatham, Illinois Posts: 756	I saw one yesterday, and ricer was the first thing that popped into my head. __________________ American Racing 1 7/8" Headers and Hi-Flow Cats, CAI cold air intake, Flowmaster AT exhaust, Vengeance Racing Stage 2 cam, VMax ported throttle body, TEA valve springs and titanium retainers, Trick Flow hardened pushrods, 180* T-stat, Comp Trunion kit, ZL1 Fuel Pump, ADM Fuel Pump Control Module, 20% window tint, Whipple Supercharger. Tuned by Mike Norris Motorsports. 656rwhp/584rwtq @10 PSI.

06-15-2011, 07:18 AM	#7
Can't_C_Me Don't Sleep on My V6 Drives: 2016 C7 1LT Join Date: Dec 2010 Location: Oxford, GA Posts: 3,596 View My Garage	Yea that's the High wing spoiler AKA the T3/BumbleBee spoiler. There's a member around here with one on a yellow LLT. It requires swapping out the trunks lil air strut with one that comes with the kit. The wing is way heavier. __________________

06-15-2011, 06:59 AM	#2
HookemHorns Drives: 2023 Camaro ZL1 Red Hot Convertible Join Date: May 2011 Location: Arkansas Posts: 859	I like the dovetail much better.

06-15-2011, 07:19 AM	#8
Tigg Irreverent Schmoe Drives: Black 2010 2SS Join Date: Apr 2010 Location: pennsylvania Posts: 366	I want to get the ZL1 spoiler when it becomes available. __________________ Black 2SS,M6,Sunroof,R6P.11390

06-15-2011, 08:52 AM	#9
smokingcamaro Drives: 2010 Camaro LS Join Date: Dec 2010 Location: Charlotte,NC Posts: 394 View My Garage	I have a Cyber Grey Camaro, If i wanted to get one of these could since the paint is no longer available?

06-15-2011, 09:17 AM	#10
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	I just got the MPD1 spoiler. I like it.

06-15-2011, 09:25 AM	#11
CamaroSkooter Retarded One-Legged Owl Drives: 2010 Black Camaro 2SS Join Date: Oct 2008 Location: San Antonio, TX Posts: 9,745	I want to see it installed. I kind of like it, but for me to get one, I would have to replace the entire trunk lid, wouldn't I? The holes for the high-wing spoiler don't match up with the holes on the SS spoiler, or am I wrong? __________________ My VIN = 2G1FK1EJ9A9105017 Build Date: 04-23-2009 according to: http://www.compnine.com/vid.php

06-15-2011, 09:28 AM	#12
Moorepheus Drives: 2013 Dodge Charge R/T Plus AWD Join Date: Jul 2009 Location: Niagara Falls, NY Posts: 1,307 View My Garage	If I didn't already have the factory spoiler on my Camaro, I would go with that High Wing Spoiler.....I like how it looks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All order status requests in here (up to status 3800). List of Order Status Codes.	GTAHVIT	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	54436	12-28-2016 08:04 AM
2011 Camaro SS/RS MPD1 Spoiler Install	Extinct	Camaro DIY & HOW-TO instructions & discussions	32	08-02-2015 12:06 PM
2011 Rear Spoiler issue	Memphis SS	5th Gen Camaro SS LS LT General Discussions	28	12-22-2010 09:08 PM
Dealer Spoiler??	Jaime068	Cosmetics and Lighting Modification Discussions	9	12-10-2010 01:01 AM
Stripe Issue...dealer wants to give me credit, should I?	lostinvt	5th Gen Camaro SS LS LT General Discussions	15	09-25-2009 11:48 AM