Attention High HP Camaros New Polyurethane Transmission Mount - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MJ · 01-03-2012, 01:54 PM

Installed MTI polyurathane trans mount 2 weeks ago. Stock rubber mount is very loose and allows for a lot of movement - too much in my opinion - when running higher hp levels. MTI mount is beefier with thick strip of polyurathane. Didn't notice any increase in noise or vibration at idle or part throttle. Did notice some increase in vibration during hard acceleration but nothing that I'd consider to be an issue. I'm also running Prothane motor mounts.

MTI Racing Kevin · 01-13-2012, 11:17 AM

I have these mounts in stock and ready to ship.

lakers67 · 01-13-2012, 11:43 PM

Is the automatic version in the works?

MTI Racing · 01-16-2012, 07:51 AM

Not at this time Lakers67.

I recommend these products...

http://www.mtiracing.com/Purchase/Ne...nectors-2.html

http://www.mtiracing.com/Purchase/Ne...l-Brace-2.html

http://www.mtiracing.com/Purchase/Ne...r-Package.html

http://mtiracing.com/Purchase/New-20...en-Camaro.html

http://mtiracing.com/Purchase/New-20...o-1410106.html

lakers67 · 01-16-2012, 04:54 PM

I've actually have all those products you just recommended! So are you saying I dont need a Poly trans mount?

MTI Racing · 01-17-2012, 05:22 PM

Everyone can improve the trans mount. I was just giving suggestions on other ways to improve.

Hope that helps!

-Stephen

DandD · 03-07-2012, 07:32 PM

Ok the weather is finally breaking here and I got my car back with one of the items installed being the polyurethane trans mount. I've only got just over 300 miles on it since getting the car back, but the trans mount is great, no more movement of the trans at all unlike with the stock mount. Noise and vibrations are a non issue. Count me as a very satisfied customer, thanks Stephen!

Dan

mstanford.us · 03-07-2012, 09:15 PM

Seems like this would mate up well with semi-solid motor mounts and semi solid rear diff mounts. I'm having the latter installed next week. JRE prepped 3.91 diff. Pfadt has totally solid motor mounts, the only motor mounts I've seen so far. Seems like semi solid might be a little more forgiving. I've seen this description before and it definitely peaked my interest.

MTI Racing · 03-08-2012, 08:13 AM

You are welcome Dan!

Availability is good. We have stock ready to ship!

Crime2 · 03-08-2012, 07:08 PM

Are you still doing the free shipping on this? I was on he site and it wants $16.20 for ground shipping. If you still are doing the free shipping I will be in for one.

MTI Racing Kevin · 03-09-2012, 09:27 AM

Quote:

Originally Posted by Crime2

Are you still doing the free shipping on this? I was on he site and it wants $16.20 for ground shipping. If you still are doing the free shipping I will be in for one.

I adjusted the online parameters. Now FREE shipping for the lower 48 states!!

calbert1999 · 03-09-2012, 09:42 AM

Subscribed.
May consider this when I do my 9" setup.

Crime2 · 03-09-2012, 10:29 AM

Quote:

Originally Posted by MTI Racing Kevin

I adjusted the online parameters. Now FREE shipping for the lower 48 states!!

Thank you! Order will go in today when I get home for work.

Sent from my iPhone using Tapatalk. If is spelllled wrong deal with it.

MTI Racing · 03-12-2012, 08:26 AM

Great, you'll enjoy it!

01-03-2012, 01:54 PM	#15
MJ Drives: 2010 Camaro SS/RS Join Date: Mar 2009 Location: NY Posts: 403	MTI Trans mount - some feedback... Installed MTI polyurathane trans mount 2 weeks ago. Stock rubber mount is very loose and allows for a lot of movement - too much in my opinion - when running higher hp levels. MTI mount is beefier with thick strip of polyurathane. Didn't notice any increase in noise or vibration at idle or part throttle. Did notice some increase in vibration during hard acceleration but nothing that I'd consider to be an issue. I'm also running Prothane motor mounts. Last edited by MJ; 01-03-2012 at 03:59 PM.

03-07-2012, 07:32 PM	#21
DandD Drives: 2010 2SS and 2011 LS Join Date: Aug 2011 Location: Western burbs of the Motor City Posts: 628 View My Garage	Ok the weather is finally breaking here and I got my car back with one of the items installed being the polyurethane trans mount. I've only got just over 300 miles on it since getting the car back, but the trans mount is great, no more movement of the trans at all unlike with the stock mount. Noise and vibrations are a non issue. Count me as a very satisfied customer, thanks Stephen! Dan __________________ Around here we like baseball, hot dogs, apple pie, and Chevrolet

03-07-2012, 09:15 PM	#22
mstanford.us Mark Stanford Drives: Black 2010 SS LS3 Join Date: Aug 2010 Location: Wauconda, IL Posts: 78	Seems like this would mate up well with semi-solid motor mounts and semi solid rear diff mounts. I'm having the latter installed next week. JRE prepped 3.91 diff. Pfadt has totally solid motor mounts, the only motor mounts I've seen so far. Seems like semi solid might be a little more forgiving. I've seen this description before and it definitely peaked my interest. __________________ Mark Stanford 2010 M6 Midwestracing on FB CAI, Kooks 1 7/8" 3", LG G6X3, Remote tune by Ted Jannetty JRE God of Tuning, ID 8500 injectors, ZL1 Fuel system, BMR, Yellaterra, Lunati Valve train, Street Slayer Carbon Twin. Numbers pending Dyno test.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camo shots of a Camaro	bballr4567	Camaro ZL1 Forum - ZL1 Specific Topics	150	02-18-2010 12:13 PM

01-13-2012, 11:17 AM	#16
MTI Racing Kevin Drives: 2010 Camaro Join Date: Feb 2010 Location: Marietta, GA Posts: 525	I have these mounts in stock and ready to ship.

01-13-2012, 11:43 PM	#17
lakers67 Drives: Camaro 2SS Join Date: Jan 2010 Location: NJ Posts: 321	Is the automatic version in the works?

01-16-2012, 07:51 AM	#18
MTI Racing Drives: 2010 Camaro SS Join Date: May 2009 Location: Marietta, GA Posts: 442	Not at this time Lakers67. I recommend these products... http://www.mtiracing.com/Purchase/Ne...nectors-2.html http://www.mtiracing.com/Purchase/Ne...l-Brace-2.html http://www.mtiracing.com/Purchase/Ne...r-Package.html http://mtiracing.com/Purchase/New-20...en-Camaro.html http://mtiracing.com/Purchase/New-20...o-1410106.html

01-16-2012, 04:54 PM	#19
lakers67 Drives: Camaro 2SS Join Date: Jan 2010 Location: NJ Posts: 321	I've actually have all those products you just recommended! So are you saying I dont need a Poly trans mount?

01-17-2012, 05:22 PM	#20
MTI Racing Drives: 2010 Camaro SS Join Date: May 2009 Location: Marietta, GA Posts: 442	Everyone can improve the trans mount. I was just giving suggestions on other ways to improve. Hope that helps! -Stephen

03-08-2012, 08:13 AM	#23
MTI Racing Drives: 2010 Camaro SS Join Date: May 2009 Location: Marietta, GA Posts: 442	You are welcome Dan! Availability is good. We have stock ready to ship!

03-08-2012, 07:08 PM	#24
Crime2 Got Boost? Drives: 2010 1SS RS Join Date: Aug 2011 Location: Clearwater, FL Posts: 606	Are you still doing the free shipping on this? I was on he site and it wants $16.20 for ground shipping. If you still are doing the free shipping I will be in for one.

03-09-2012, 09:42 AM	#26
calbert1999 Camaro SS Lover Drives: 2010 Camaro 2SS/RS Black IOM Join Date: Jun 2010 Location: Toronto, Ontario (Canada) Posts: 2,863	Subscribed. May consider this when I do my 9" setup.

03-12-2012, 08:26 AM	#28
MTI Racing Drives: 2010 Camaro SS Join Date: May 2009 Location: Marietta, GA Posts: 442	Great, you'll enjoy it!