Attention High HP Camaros New Polyurethane Transmission Mount - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Crime2 · 03-20-2012, 05:50 PM

Had mine installed on Monday and so far so good. No vibration or drivetrain noise with it. Had a new clutch installed as well so have not gone WOT yet. Will post again when I have some more miles on it.

Thanks for the free and fast shipping!

Sent from my iPhone using Tapatalk. If is spelllled wrong deal with it.

MTI Racing Kevin · 03-21-2012, 09:35 AM

[QUOTE=Crime2;4677237]Had mine installed on Monday and so far so good. No vibration or drivetrain noise with it.

That sounds great Crime2. Replacing the weak rubber mount with the poly mount translates to more power to the rear tires.

1stGM · 03-21-2012, 10:05 AM

Just ordered mine last night...

MTI Racing Kevin · 05-08-2012, 02:42 PM

I have the mounts in stock and ready to ship.

xtreme industries · 05-15-2012, 09:08 AM

will this work on a V6 standard tranny?

MTI Racing · 05-16-2012, 08:23 AM

Quote:

Originally Posted by xtreme industries

will this work on a V6 standard tranny?

The mount is designed for the V8.

Scott@Bjorn3D · 09-15-2013, 06:58 PM

Does this get rid of the clunking sound that makes you think the drivetrain is going to fall off the car when shifting?

MTI Racing Kevin · 09-16-2013, 11:18 AM

Quote:

Originally Posted by Scott@Bjorn3D

Does this get rid of the clunking sound that makes you think the drivetrain is going to fall off the car when shifting?

I know the clunking noise you are talking about. I cannot guarantee the mount will cure your problem but it is a big upgrade over the oem rubber mount. The rubber mount is soft to begin with and when you add heat from driving the car it gets even softer. Poly will not do this.

lakers67 · 09-16-2013, 12:34 PM

Make one for an automatic

MTI Racing Kevin · 09-17-2013, 02:21 PM

Quote:

Originally Posted by lakers67

Make one for an automatic

Poly trans mount for the automatic will be available in a couple of weeks. Keep up with our Facebook, website, and Camaro5 for the announcement they have arrived.

FrankT · 09-17-2013, 06:23 PM

I just ordered mine today (for a manual). Didn't get free shipping though.

AF1Strider · 03-09-2015, 09:31 AM

Are these still available?

SNSSTR · 03-09-2015, 02:22 PM

I've had this for about a year or so now and the urethane is starting to separate from the metal on one side of the mount. Noticed this when I went to change my clutch a month or two ago. Wondering if there's anything that can be done to fix it?

woodside783 · 10-17-2015, 08:53 AM

They don't make these anymore wonder if that is why

03-21-2012, 10:05 AM	#31
1stGM Drives: IOM 2SS/RS M6 Join Date: Oct 2009 Location: Kenosha, Wisconsin Posts: 240	Just ordered mine last night... __________________ 2010 2SS..LS3..Procharger..4l80e..DSS 9"

05-08-2012, 02:42 PM	#32
MTI Racing Kevin Drives: 2010 Camaro Join Date: Feb 2010 Location: Marietta, GA Posts: 525	Transmission Poly Mount I have the mounts in stock and ready to ship.

09-16-2013, 12:34 PM	#37
lakers67 Drives: Camaro 2SS Join Date: Jan 2010 Location: NJ Posts: 321	Make one for an automatic __________________ 2SS, L99 to LS3 Conversion, Ported Heads, JRE Rough Idle Cam, MagnaCharger, ID850, 3.4 pulley, SCT, JRE tuned, Kooks 1 7/8 Headers, Magnaflow Exhaust, ADM Race CAI, Vmax TB, 3.70 AAM Gears, Dual Fuel Pump, BMR/Pfadt bushings and suspension,

09-17-2013, 06:23 PM	#39
FrankT 400HP used to be enough.. Drives: 2010 2SS rs manual Join Date: Aug 2009 Location: Central NC Posts: 772	I just ordered mine today (for a manual). Didn't get free shipping though. __________________ Build thread: http://www.camaro5.com/forums/showthread.php?t=47925

03-09-2015, 02:22 PM	#41
SNSSTR All About That Speed Drives: 2010 Camaro 2SS/RS Join Date: Mar 2013 Location: Memphis Posts: 1,181	I've had this for about a year or so now and the urethane is starting to separate from the metal on one side of the mount. Noticed this when I went to change my clutch a month or two ago. Wondering if there's anything that can be done to fix it? __________________ 2010 SS M6 \| 416 CI \| H/C/I \| GPI TUNED \| SNSSTR

03-20-2012, 05:50 PM	#29
Crime2 Got Boost? Drives: 2010 1SS RS Join Date: Aug 2011 Location: Clearwater, FL Posts: 606	Had mine installed on Monday and so far so good. No vibration or drivetrain noise with it. Had a new clutch installed as well so have not gone WOT yet. Will post again when I have some more miles on it. Thanks for the free and fast shipping! Sent from my iPhone using Tapatalk. If is spelllled wrong deal with it.

03-21-2012, 09:35 AM	#30
MTI Racing Kevin Drives: 2010 Camaro Join Date: Feb 2010 Location: Marietta, GA Posts: 525	[QUOTE=Crime2;4677237]Had mine installed on Monday and so far so good. No vibration or drivetrain noise with it. That sounds great Crime2. Replacing the weak rubber mount with the poly mount translates to more power to the rear tires.

05-15-2012, 09:08 AM	#33
xtreme industries Drives: 2010 Camaro 2lt RS Join Date: Sep 2009 Location: Calgary, AB, Canada Posts: 548	will this work on a V6 standard tranny?

09-15-2013, 06:58 PM	#35
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	Does this get rid of the clunking sound that makes you think the drivetrain is going to fall off the car when shifting?

03-09-2015, 09:31 AM	#40
AF1Strider Drives: 2011 Camaro 1SS/RS Join Date: Jan 2007 Location: Navarre, FL Posts: 496 View My Garage	Are these still available?

10-17-2015, 08:53 AM	#42
woodside783 Casey Woodside Drives: a very fun car Join Date: Jun 2010 Location: Tn Posts: 1,906	They don't make these anymore wonder if that is why __________________ Instagram @caseywoodside http://youtu.be/CSc9aPh_X_w

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camo shots of a Camaro	bballr4567	Camaro ZL1 Forum - ZL1 Specific Topics	150	02-18-2010 12:13 PM