03-07-2009, 12:37 PM | #1 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
Nelson Twin Turbo LS3 Engines for Camaro
For anyone that is interested - Nelson Racing Engines just posted what I feel is a great deal for a complete drop-in Twin Turbo LS3 engine. It would definitely make the new Camaro scream. After seeing all the post of power adders I figured to post this for anyone looking for a big step up in power. I love power adders, but am always afraid of the bottom end coming unglued. This is a completely new engine build with the best parts.
I am not affiliated with Tom Nelson, but have one of his engines in my Firebird and I can't say enough about the quality and support I received. His stuff is absolutely top notch. So, if you a want some insane streetable power for your new Camaro you might want to take a look. http://www.lateral-g.net/forums/showthread.php4?t=19531 His phone number is 818-998-5593, but be forewarned you will probably have to call a bunch of times before he gets back to you. I used to always try to call and he was never in his office, always out in their shop or on the dyno... |
03-07-2009, 01:02 PM | #2 |
just can't seem to leave
|
__________________
Eve ('00 FRC): hot-air intake
Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408 |
03-07-2009, 01:11 PM | #3 |
Drives: The Imperial Army Join Date: Feb 2009
Location: The Darkside
Posts: 15,742
|
nice
|
03-07-2009, 01:44 PM | #4 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
cool, tho I wonder why they chose to mount the wastegates past a 90* angle from the downpipe. maybe its just for room clearance and whatnot, but I would change that before putting it into my car. dunno, but ive always tried to keep it set up like this.
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
Last edited by CamaroSpike23; 03-07-2009 at 01:56 PM. |
||
03-07-2009, 02:06 PM | #5 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
another thing I just noticed, they are using a dual blade throttle body. im suprised they didnt go with a monoblade. in fact, the one they are using looks like a 58mm LT1 throttle body. maybe im just nitpicking, but I woulda gone with something like this instead.
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
03-07-2009, 02:24 PM | #6 |
just can't seem to leave
|
maybe spike should go teach mr nelson a thing or two!
__________________
Eve ('00 FRC): hot-air intake
Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408 |
03-07-2009, 02:25 PM | #7 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
JMO on the matter. cus if im going to spend 20k on a TT motor, there would be some changes to it.
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
03-07-2009, 04:43 PM | #8 |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
Spike -
Those are good observations and great ideas. I do know that the wastegates are done that way for clearance. When I had Tom do a motor for me before, I brought up some "new" ideas and he incorporated many of them in the build. He gave me good feedback on the ones that weren't such a hot idea. If you don't mind, I would like to bring the throttle body one up. Looks like you've been down this path before. Thanks. |
03-07-2009, 05:00 PM | #9 | |||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
Quote:
the one thing i can think of as far as the t/b goes is that possibly the dual blade setup allows for better air mixing from each turbo into the intake, but I dont have any airflow data that would substantiate either way, but one would imagine that running a monoblade setup over a dual, split blade setup would prove to be less restrictive. as for the waste gate routing, the only other option i can think of off hand is to run it in a "Y" fashion right where the downpipe bends down to the turbo. then you could run a shorter oil line (whoopity do...lol), and run the waste gate pretty much straight forward and somewhat parallel to the turbo itself with overall shorter length of tubing for the wastegate as well.. and while im sure this setup is pushing 800hp... ya never know... could be pushing 817hp with a few minor changes...
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
|||
03-07-2009, 05:04 PM | #10 |
More human than human
|
Yeah it kind of looks like a stealth ram setup for an L98
__________________
1100 - 10/22/2008 3000 - 05/27/2009 3300 - 06/06/2009 3800 - 06/29/2009 4B00 - 06/29/2009 Warehouse 13 survivor Blood stains,speed kills,fast cars,cheap thrills,rich women,fine wine,i lost my sense i lost control i lost my mind. |
03-07-2009, 05:07 PM | #11 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
arent sheet metal intakes beautiful?
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
03-07-2009, 05:16 PM | #12 |
aka Patrick
|
wow... $20k price tag...
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
03-07-2009, 05:22 PM | #13 | ||
Truth Enforcer
Drives: anything I can get my hands on Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,797
|
__________________
Never race anything you can't afford to light on fire and push off a cliff
A group as a whole tends to be smarter than the smartest person in that group until one jackass convinces everyone otherwise. Quote:
Quote:
|
||
03-07-2009, 09:19 PM | #14 | |
SST...
Drives: SST Camaro 2010 Join Date: Oct 2008
Location: East Coast of Florida
Posts: 5,927
|
Quote:
I'll be sure to bring it up. Thank You Again. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Would you Twin Turbo for the right price? | peteypab2133 | 5th Gen Camaro SS LS LT General Discussions | 79 | 11-09-2009 05:57 PM |
LS3 Specs revealed: GM's 436hp Sick 6.2L LS3 | TAG UR IT | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 28 | 07-30-2009 06:02 PM |
2011 mustang possible Twin turbo V6 | Devil-eyes | General Automotive + Other Cars Discussion | 40 | 03-19-2009 03:00 PM |
HSV Clubsport R8 317 LS3 twin turbo | Caliman93230 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 15 | 10-15-2008 10:42 AM |