07-11-2012, 04:13 PM | #1 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
JANNETTY RACING LS3 NEW SUPERSTREET BRAWLER PACKAGE
Utilizing the Whipple Supercharger system and combining Some JRE components and tuning the results are Pretty impressive.
Our Customer Shawn from Massachusetts purchased and installed the JRE Do it yourself Street Brawler and JRE Rough Idle Blower Cam package and supporting fuel components. I sent him a base tune to drive it here and I just finished tuning it on the dyno. LS3/M6 JRE Rough Idle blower cam package Whipple supercharger 3.75 pulley ZR-1 Map ZR-1 Plugs LPE Dual fuel pump system Injector Dynamics ID-850s CAI with JRE Scoop Rotofab washer bottle relocation Dynatech LT Headers w OR pipes JRE Custom Tuning 690 RWHP 588 RWTQ on 93 octane pump gas.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 12-10-2014 at 12:11 PM. |
07-11-2012, 04:39 PM | #2 |
"Go on the last yellow.."
Drives: 2010 2SS/RS L99 CGM Join Date: Jan 2010
Location: Ocala, FL
Posts: 171
|
Nice!! How much boost, and what gauges do you guys use?
__________________
Blown and built by Ty Sochacki, tuned by Jeremy Formato. Member of the 11 second club.
|
07-11-2012, 05:26 PM | #3 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
Nice. I can't wait i just ordered a Whipple from Ted and already have the rough idle blower cam
|
07-11-2012, 05:37 PM | #4 |
Perpetual Order
Drives: indeed Join Date: Jun 2012
Location: Texas Hill Country
Posts: 1,277
|
anyone remember when it was hard to get 690 rwhp? lol. cool.
|
07-11-2012, 05:52 PM | #5 |
3bood
Drives: Camaro 2010 Join Date: Feb 2012
Location: UAE
Posts: 185
|
Very nice, haw much boost?
|
07-11-2012, 06:01 PM | #6 |
Drives: Maggie blown LS3 vette Join Date: Aug 2009
Location: SE TX
Posts: 1,490
|
The green line that has "Man P" stamped is boost....I'm guessing. 11 psi.
|
07-11-2012, 06:46 PM | #7 |
Drives: 2010 Victory Red Camaro SS/RS LS3 Join Date: Oct 2010
Location: Long Island
Posts: 166
|
How safe is this amount of wheel hp and amount of boost on a stock bottom end?
__________________
ARH 1 7/8 headers catless 3'' long system, Whipple sc 4.00 pulley 9 lbs boost, msd boost-a-pump, CAI intake, Pfadt coilovers, toe links, trailing arms, solid cradle bushings, sway bars, Forgestar CF5 19x9.5/19x11, M/T et street II radials
|
07-11-2012, 07:11 PM | #8 | |
USAF retired! Thank God!
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28 Join Date: Jul 2011
Location: North Texas
Posts: 2,799
|
Quote:
Depends on a bunch of variables such as how hard you drive it, the tune (which in this case is no issue), and fueling which also seems more than adequate, and of course luck. Safe probably is not the best word, reliable is probably more adequate....have a back up just in case Things can and do happen.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
|
|
07-11-2012, 07:16 PM | #9 |
|
awesome numbers, another Jannetty monster 5th Gen
__________________
Jannetty Racing JRE Street Package
|
07-11-2012, 07:17 PM | #10 |
Drives: 2010 Victory Red Camaro SS/RS LS3 Join Date: Oct 2010
Location: Long Island
Posts: 166
|
Id give up a few pounds of boost and hp to a larger 3.75 pulley, to be a little bit more on the safe side. Those are awesome numbers thou! Ted tuned my car and it runs better then perfect.
__________________
ARH 1 7/8 headers catless 3'' long system, Whipple sc 4.00 pulley 9 lbs boost, msd boost-a-pump, CAI intake, Pfadt coilovers, toe links, trailing arms, solid cradle bushings, sway bars, Forgestar CF5 19x9.5/19x11, M/T et street II radials
|
07-11-2012, 07:24 PM | #11 |
Drives: 2010 A6 SS/RS Join Date: Sep 2009
Location: Connecticut
Posts: 525
|
Nice work Ted......cant wait for mine to be done...
__________________
Scott(Retired Navy)(Paralyzed Triathlete)
New Car 99 Camaro SS with Dart 427, F1x, Rossler 210, 9 inch and BS3... scary ride SOLD 2010 A6 ss/rs White-VORTECH YSI/LPE fuel system/ID 850's/LG Motorsports full Exhaust/Protorque 3400 stall/Livernois Stage 3 Heads/Cam/Bogarts/ Moroso subframes/JRE Rear with 3:70 gears/Aluminium DS/line lock/drag alignment/Suspension/JW Racing 10 pt cage/13.6 psi 719.34 rwhp 558.4 TQ/ Best Pass 1.51 60ft 10.08 136.78 mph JRE Built |
07-11-2012, 07:40 PM | #12 |
Drives: LS3S/C Join Date: Aug 2008
Location: CALI
Posts: 1,344
|
HOLY MONKEY.WOOT
__________________
MODS whipple 2.9L s/c, ADM race scoop, 600 rwhp 550 wrtq, .
|
07-11-2012, 08:27 PM | #13 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
The Power is still climbing at 7200 so I don't know how much more it would make if I let it. It has a 3.750 pulley Edit .
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
07-11-2012, 08:28 PM | #14 |
Drives: 2010 2SS Camaro Join Date: Mar 2012
Location: Boynton beach, FL
Posts: 114
|
Sweet Ted! You are the man! I've got the same supporting mods and now saving up for the Whipple. I can't wait!
|
|
|
|
|