05-12-2015, 12:16 PM | #85 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
I just saw this. Congrats on COTW.
One of these day I'm going to be able to hang with the big dogs. Congrats man, nice work.
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
05-12-2015, 02:59 PM | #86 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Thanks brother, I appreciate it! If I can then anyone can, it's taken me a long time and little mod by little mod. Sometimes it gets discouraging looking at the guys with fat wallets and how fast they can mod their cars but I have the sense of pride I earned it and did most of the work myself. You have a beautiful ride and next time we meet up we will have to chat.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
05-13-2015, 06:03 PM | #87 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Looks so much better lowered, hated looking like a small 4x4!
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
05-14-2015, 12:45 PM | #88 |
|
congrats on COTW!!!
|
05-14-2015, 02:40 PM | #89 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
05-26-2015, 12:09 PM | #90 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Did the heater hose relocation for the early 5th gens courtesy of the kit I got from Katech. Fairly easy mod, just cut the old hoses off the firewall to not damage the heater core and new hoses slid right on. The only pain was putting the new clamps on the hoses, its a tight space in the back of the engine bay. Looks better than the lousy hoses placed directly on top of the hot engine.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
05-26-2015, 12:11 PM | #91 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Observed Memorial Day by visiting my local National Cemetery, so many brave men and women. It was an honor to visit with them.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
05-27-2015, 08:16 AM | #92 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
So here in Virginia the dealerships mount front tags unless you are one of the lucky few to catch them before hand and stop them. So until I can get a ZL1 front bumper I found a cheap temporary fix for the holes left behind after removing the plate holder....went to the parts store and picked up some trim plugs for a few dollars and then to my local chevy dealer for correct paint code touch up paint. Hit the plugs with some primer and then with the touch up paint. I had to clean up the holes with a drill bit and then used touch up paint to hit areas around the holes and placed the trim plugs in. Cheap, easy, and better than the plate being there in my opinion.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
06-08-2015, 07:58 AM | #93 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Pics
Novice shots I took of my car over the weekend. Brought my car up to Long Island and researched cool areas for photos, stumpled upon Kings Park Pyschiatric Center which has been abandoned for many years. I went around the blocked off entrance via an old bike path and make my way to the roadway lol. A cop was escorting kids out of an abandoned building and spotted me, luckily I had just finished my photos, and the cop was very cool and escorted me the best road back since the roads were horrible from zero maintenance over the years. BTW I dont endorse anyone trespassing, to be fair the sign said road closed and gated, not no trespeassing (i know i know its the same thing)
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
06-27-2015, 09:07 PM | #94 |
Congrats on this man. Car is looking nice.
|
|
06-28-2015, 09:46 AM | #95 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
Thank you very much brother, likewise
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
09-29-2015, 07:42 AM | #96 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
dipped fuse box cover
had my fuse box cover dipped. Now to get the slp coil pack covers and have them dipped to clean things up
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
03-16-2016, 02:44 PM | #97 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
BTR Stage 3 Cam
https://youtu.be/OCRmvpxPO-0
First rough tune on my car after my BTR Stage 3 cam install, sounds good here but so much better in the video I took yesterday. I will upload more videos later once I get them off my phone. Very impressed with the driveability and power this Cam offers.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
03-16-2016, 03:02 PM | #98 |
AnarchySS
Drives: 2010 SS/RS "Anarchy" Join Date: May 2013
Location: Virginia & Long Island, NY
Posts: 352
|
BTR Cam
https://youtu.be/OCRmvpxPO-0
Another rough tune video.....I'll get the final tune video on here in a few hours when I get home.
__________________
ANARCHY- 2010 Camaro 1SS/RS 630rwhp/620LbsTq |
|
|
Thread Tools | |
|
|