09-09-2010, 12:20 PM | #141 |
NUPOC Candidate
|
Is there an update on the progress?
__________________
No more Charlotte...
Currently driving an '08 Honda Accord... Will be driving a ZL1 before you know it! |
09-10-2010, 10:13 AM | #142 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Great work Jordan. Keep us 'posted'
|
09-13-2010, 03:58 PM | #143 |
Think Fast.
Drives: 2010 National Speed NZ1200 Camaro Join Date: Aug 2010
Location: Wilmington, NC
Posts: 37
|
I apologize guys, it's been especially hectic around here lately with all the projects going on, I'm just now getting around to updating this thread. Granted, there's not a huge amount to update with, as wiring is only so entertaining, but I'll update what I can.
The rear valence fitted, not permanently installed... Chris working on the breather box... Fitting in place... Filters in place, almost finalized... Just for fun, while the valve covers were off at powder coating, I had to snap this picture... Chris Crawford (veee8) and Ben Salasko working on the wiring for transmission control/automatic conversion and the Variable Power On Demand switch... The wheels ready to have the tires mounted... 315/30R20 Nitto NT-05 mounted... Very aggressive tread... The wheels really set the car off, they look beautiful... It looks excellent from the rear... |
09-13-2010, 04:37 PM | #144 |
NUPOC Candidate
|
Heck yeah! I just put some NT05s on this week and went to the dragstrip last night. Even though they aren't the NT05R's, they hooked up really nice and they have better treadwear than the softer compound. Nice choice guys!
__________________
No more Charlotte...
Currently driving an '08 Honda Accord... Will be driving a ZL1 before you know it! |
09-13-2010, 05:40 PM | #145 |
The Freak Kid
|
Can't wait to see this finished. Some amazing work done on this car. I have to say this thing belongs in a museum its ARTWORK.
__________________
|
09-14-2010, 11:28 AM | #146 | ||
Think Fast.
Drives: 2010 National Speed NZ1200 Camaro Join Date: Aug 2010
Location: Wilmington, NC
Posts: 37
|
Quote:
Quote:
The breather box almost complete, heading to powder coating now... Just a few documentation shots of the wiring below. Ben is an absolute artist with wiring, every bit of wiring he does is in this manner, very clean. Any wiring done in the vehicle is easy to identify by this quality... During the process; Ben getting ready to knock a few harnesses out... Exposed... Shrink wrapped and protected, ready for installation... The boost control solenoids setup, wired and ready for installation... To be secured somewhere under the cowl, with the transmission control components as well... Now, this enclosed module here is something integral that Ben was able to come up with. Essentially, the clutch pedal on these Camaros is not as simple as an open switch like most older vehicles, it actually utilizes two separate potentiometers for pedal position. Meaning? Ben had to design a module to simulate potentiometer operation for the automatic conversion. This is that module... |
||
09-14-2010, 11:48 AM | #147 |
Think Fast.
Drives: 2010 National Speed NZ1200 Camaro Join Date: Aug 2010
Location: Wilmington, NC
Posts: 37
|
The intake and charge system back from powder coating, going back together.
(apologies, I couldn't for the life of me get a clear picture from this angle) From the front... From the rear... (note, the turbocharger intakes follow behind the bumper cover to the fender wells) Where the turbocharger intake filters route, nice and high, sheltered from the elements (once the splash shields are in place); Passenger side, no splash shield in place... Driver side, splash shield in place... Engine oil cooler converted from a wet housing cooler to independent air cooler, mounted front and center of the lower grill (please note, the intercooler and transmission cooler recieve the majority of their air flow from the upper grill)... |
09-14-2010, 11:59 AM | #148 |
Drives: 2011 Camaro Join Date: Apr 2010
Location: NYC
Posts: 627
|
Nice. This + Speedster SST = Pride of Camaro5
|
09-14-2010, 01:02 PM | #149 |
NUPOC Candidate
|
What tires did you decide to go with on the fronts?
__________________
No more Charlotte...
Currently driving an '08 Honda Accord... Will be driving a ZL1 before you know it! |
09-14-2010, 07:38 PM | #150 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
AWESOME WORK GUYS!!!! Cant wait for a ride!!!
|
09-14-2010, 07:58 PM | #151 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
09-15-2010, 11:52 AM | #152 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
|
09-16-2010, 09:23 AM | #153 |
cheap and fast
Drives: older Join Date: Apr 2009
Location: Abilene, TX
Posts: 237
|
love it
|
09-16-2010, 10:25 AM | #154 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA | irocnroll | 5th Gen Camaro SS LS LT General Discussions | 101 | 02-27-2012 12:25 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
Detroit News panel wants GM to build Camaro concept | Tran | 5th Gen Camaro SS LS LT General Discussions | 12 | 03-15-2009 04:38 PM |