Dynomax VT - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BigVic · 06-24-2012, 06:13 AM

I put in the url from RaceMartat, and it did a price match at Jeg's.

Dynomax #289-38493

VT Axle-Back Exhaust System 2010-11 Chevy Camaro
3.6L
2.5" Tubing Diameter
4" Polished Stainless Steel Tips
http://www.jegs.com/i/Dynomax/289/38493/10002/-1

Normally $446.99
With price match, $366.69 + $13.00 handling = $380.68, less $75 rebate/gift card = $305.68

http://www.race-mart.com/Dynomax-DYO-38493.html

Just over $300 bucks shipped is not bad.

Part #38493 fits 2010-2012 V6's Camaro's, even though it says 2010-2011 on Jeg's.

DynoMax link:
http://tinyurl.com/7a6dzbt

06_warrior · 06-24-2012, 07:56 AM

Wondering if a Camaro has the GM-X body kit do you need to extend the exhaust tips on this exhaust due to the square and extended rear bumper cover?

joep · 06-24-2012, 09:56 AM

I just bought Dynomax VT from Jegs. Great deal. Should have it next week. Hope it sounds like the video.

Diazr1 · 06-24-2012, 03:19 PM

Joep did u price match. Is this new jegs feature. I'm stoked

joep · 06-25-2012, 07:38 AM

Yup, I did price match.

Henry G. · 06-29-2012, 11:06 PM

Diaz did you get your Dynomax installed?

Diazr1 · 07-02-2012, 03:14 PM

Yeah then havent gotten to really get a hear for it from the outside. I like cabin sound you can hear it good . Not too loud and abnoxious and no longer stock. I was going willy nilly on the fwy for 8 seconds then hit traffic. But im in the hospital right now

Henry G. · 07-02-2012, 06:03 PM

Hope you get better soon and off the chemo, so you can drive your Camaro. Take care bud.

joep · 07-03-2012, 05:04 AM

Hi all, I just installed Dynomx-VT last night. I am very happy with the sound, it has a deeper more throaty sound at idle then stock and when you step on it, it comes alive. Coupled with Roto-Fab cai it is the perfect compliment. I must admit the sound track is pretty good, but you have to hear the VT in person.

Diazr1 · 07-03-2012, 08:38 AM

My place Told me i can remove the resonators for a 20% increase in noise... Would that make it sound good?

joep · 07-03-2012, 02:49 PM

Well I guess its up to you how loud you want it. Right now its pretty loud when you step on it. However I am an older member, I have had a lot of hipo cars and this exhaust makes me happy, for a v6.

blackswan · 07-04-2012, 11:54 AM

Quote:

Originally Posted by Dylaqn4567

I dont know about the 2012s... im looking for an exhaust also possible the mrt v2 but there are some videos on youtube of them. They sound pretty nice im just worried about the piece that makes the drone go away, if it breaks then what?

Going by this audio alone I think the Dynomax has my attention, and $$$$, for best sound quality. Not looking for loud and if that valve really works for drone, this is a great deal.

Diazr1 · 07-04-2012, 01:21 PM

It seems to be welded pretty good only the flap were to loose would cause that but I don't think so, I'm no mechanic

Diazr1 · 07-06-2012, 04:05 PM

Getting out the hospital today. Here I come ladies

Henry G. · 07-06-2012, 06:10 PM

Find an on ramp to the 210 and let 'er rip!!!

Diazr1 · 07-06-2012, 06:13 PM

On it

Diazr1 · 07-18-2012, 01:21 PM

Loving the Dynomax VT

06-24-2012, 06:13 AM	#51
BigVic Speed Racer Drives: 2012 AGM 1LS Join Date: May 2012 Location: SE Florida Posts: 165	Prices! I put in the url from RaceMartat, and it did a price match at Jeg's. Dynomax #289-38493 VT Axle-Back Exhaust System 2010-11 Chevy Camaro 3.6L 2.5" Tubing Diameter 4" Polished Stainless Steel Tips http://www.jegs.com/i/Dynomax/289/38493/10002/-1 Normally $446.99 With price match, $366.69 + $13.00 handling = $380.68, less $75 rebate/gift card = $305.68 http://www.race-mart.com/Dynomax-DYO-38493.html Just over $300 bucks shipped is not bad. Part #38493 fits 2010-2012 V6's Camaro's, even though it says 2010-2011 on Jeg's. DynoMax link: http://tinyurl.com/7a6dzbt __________________ \| Rx Catch-Can \| ACC Fog Lights \| CAI cold air intake \| Ported Throttle Body \| 45th Anniversary wheels \| BigWorm bowtie blackout \| Iggee Seat Covers \| Leather shifter \| Sequential Turn Signals \| Rockford Fosgate Punch 10" powered subwoofer \| 4-Gauge Pack \| Trifecta tune \| Last edited by BigVic; 06-24-2012 at 06:48 AM. Reason: added info, links

06-24-2012, 09:56 AM	#53
joep Drives: 2012 45th anniversary edition Join Date: Jan 2012 Location: Massachusetts Posts: 12	Dynomax vt I just bought Dynomax VT from Jegs. Great deal. Should have it next week. Hope it sounds like the video.

06-24-2012, 07:56 AM	#52
06_warrior Drives: 2012 1SS LS3 M6 black on black :) Join Date: May 2012 Location: Georgia Posts: 960	Wondering if a Camaro has the GM-X body kit do you need to extend the exhaust tips on this exhaust due to the square and extended rear bumper cover?

06-24-2012, 03:19 PM	#54
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	Joep did u price match. Is this new jegs feature. I'm stoked

06-25-2012, 07:38 AM	#55
joep Drives: 2012 45th anniversary edition Join Date: Jan 2012 Location: Massachusetts Posts: 12	Yup, I did price match.

06-29-2012, 11:06 PM	#56
Henry G. Drives: 2012 Camaro LFX,CAI,DynomaxVT,RX CC Join Date: Feb 2012 Location: So Cal Mtns Posts: 495	Diaz did you get your Dynomax installed?

07-02-2012, 03:14 PM	#57
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	Yeah then havent gotten to really get a hear for it from the outside. I like cabin sound you can hear it good . Not too loud and abnoxious and no longer stock. I was going willy nilly on the fwy for 8 seconds then hit traffic. But im in the hospital right now

07-02-2012, 06:03 PM	#58
Henry G. Drives: 2012 Camaro LFX,CAI,DynomaxVT,RX CC Join Date: Feb 2012 Location: So Cal Mtns Posts: 495	Hope you get better soon and off the chemo, so you can drive your Camaro. Take care bud.

07-03-2012, 05:04 AM	#59
joep Drives: 2012 45th anniversary edition Join Date: Jan 2012 Location: Massachusetts Posts: 12	Hi all, I just installed Dynomx-VT last night. I am very happy with the sound, it has a deeper more throaty sound at idle then stock and when you step on it, it comes alive. Coupled with Roto-Fab cai it is the perfect compliment. I must admit the sound track is pretty good, but you have to hear the VT in person.

07-03-2012, 08:38 AM	#60
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	My place Told me i can remove the resonators for a 20% increase in noise... Would that make it sound good?

07-03-2012, 02:49 PM	#61
joep Drives: 2012 45th anniversary edition Join Date: Jan 2012 Location: Massachusetts Posts: 12	Well I guess its up to you how loud you want it. Right now its pretty loud when you step on it. However I am an older member, I have had a lot of hipo cars and this exhaust makes me happy, for a v6.

07-04-2012, 01:21 PM	#63
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	It seems to be welded pretty good only the flap were to loose would cause that but I don't think so, I'm no mechanic

07-06-2012, 04:05 PM	#64
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	Getting out the hospital today. Here I come ladies

07-06-2012, 06:10 PM	#65
Henry G. Drives: 2012 Camaro LFX,CAI,DynomaxVT,RX CC Join Date: Feb 2012 Location: So Cal Mtns Posts: 495	Find an on ramp to the 210 and let 'er rip!!!

07-06-2012, 06:13 PM	#66
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	On it

07-18-2012, 01:21 PM	#67
Diazr1 Drives: 2012 RS LFX SIM Join Date: Jan 2012 Location: Montebello Posts: 102 View My Garage	Loving the Dynomax VT