10-06-2009, 04:05 PM | #1 |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Scrming Exhaust Experiment - UPDATE!
Ok, I know it been a VERY LONG time! But I just got word today. MRT has FINALLY received their order of Aero Turbine resonators and are now actually building kits!
Ok... these look a lot nicer than mine!!! LOL! For those of you unfamiliar with my exhaust experiment this thread has all the details: http://www.camaro5.com/forums/showthread.php?t=31844 Ok, quick run down... this axle back kit is completely 304 Stainless Steel, including the hangers! Also, I know some folks were looking for 4 inch tips, but for now this kit is a 3.5 inch tips. Normal retail on the kit is going to be $499... BUT Scott is offering an introductory price of $429. They currently don't have this up on their website yet so bet is to give MRT a call at (734) 455-5807.
__________________
|
10-06-2009, 04:23 PM | #2 |
Drives: 2LT/RS Join Date: Jul 2009
Location: San Antonio
Posts: 844
|
cool.... craftsmanship looks great!
|
10-06-2009, 06:35 PM | #3 |
Drives: 2016 & 1967 Camaro, 2015 Impala, +1 Join Date: Jul 2009
Location: New York
Posts: 1,165
|
[QUOTE=scrming;1012137]Ok, I know it been a VERY LONG time! But I just got word today. MRT has FINALLY received their order of Aero Turbine resonators and are now actually building kits!
Ok... these look a lot nicer than mine!!! LOL! Ok, quick run down... this axle back kit is completely 304 Stainless Steel, including the hangers! Also, I know some folks were looking for 4 inch tips, but for now this kit is a 3.5 inch tips. Scrming, Looks very good but..... How come these resonators look different than yours ?...... Yours has beveled ends. Look at the photo of yours to see what I mean. http://www.camaro5.com/forums/showthread.php?t=31844 Thanks, Last edited by 97one; 10-06-2009 at 07:00 PM. Reason: Try to add photo of your AR25,s |
10-06-2009, 06:46 PM | #4 |
Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009
Location: Florida
Posts: 1,529
|
Figures... I didn't want to wait so I bought the AR25s yesterday! Aargg! What kind of backlog do they have at this point? How many are they gonna make with this run of Aeros? Thanks....
|
10-06-2009, 06:53 PM | #5 |
PWA Relapse
|
Looks very nice!
- X
__________________
2017 1LT/RS A8 Hyper Blue Metallic |
10-06-2009, 07:07 PM | #6 | |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Quote:
I immediately got on the phone with Scott to double check... Yes, these genuine Aero Turbine resonators! I believe Scott uses Aero Turbine because they are 304 Stainless Steel! As far as the differences... the Aero Turbines we used on my car we some older ones that Scott had on the shelf... Looking closely at mine I'm thinking these were used and they might not have looked that way when they were new. If you look really close at mine it appears that the inlet and outlet are different shapes... also don't know how much the camera angle has to do with it... Looking at at some other websites looks like the new ones are slightly different... Check this: http://www.aeroexhaust.com/import_resonator_ar25.html
__________________
|
|
10-06-2009, 07:08 PM | #7 |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Sorry... that I do not know...
__________________
|
10-07-2009, 03:48 AM | #8 |
Wow, look so good ! I really want to try this setup.
Scrming, will you replace yours with this new kit? |
|
10-07-2009, 04:25 AM | #9 |
Red Brick of Vengeance!
Drives: 12 Second Brick Join Date: Jun 2009
Location: at my pulpit
Posts: 7,745
|
Yes, I will put one of these kits on. I do car shows during the summer and the production version looks so much better than than the prototype I currently have on...
__________________
|
10-07-2009, 07:29 AM | #10 |
Drives: 2010 Camaro 2LT Rally Yellow Join Date: Aug 2009
Location: Victoria, Tx
Posts: 244
|
Just did my exhaust
Man I just did my exhaust yesterday as well. Damn if I knew they were going to have a bolt on I would have waited. All that welding heating bending was a pain in the butt. I'll have pics and vids soon I hope, think you will like what I did. Tried something different myself. Took a page out of Scrmng book and did an experiment. More to come.
__________________
Its Just A State Of Play!!
|
10-07-2009, 11:06 AM | #11 |
Drives: 1994 Quasar Z28, 2010 SIM 2SS, 6M Join Date: Mar 2009
Location: chicago
Posts: 38
|
Are they going to make them with 4" tips?
|
10-07-2009, 11:09 AM | #12 |
Drives: 1994 Quasar Z28, 2010 SIM 2SS, 6M Join Date: Mar 2009
Location: chicago
Posts: 38
|
Is this for the V6 or the V8?
|
10-07-2009, 11:19 AM | #13 |
PWA Relapse
|
__________________
2017 1LT/RS A8 Hyper Blue Metallic |
10-07-2009, 11:35 AM | #14 |
Drives: 2016 & 1967 Camaro, 2015 Impala, +1 Join Date: Jul 2009
Location: New York
Posts: 1,165
|
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OK...I'm starting a better V6 exhaust examples thread!! | KMPrenger | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 611 | 07-01-2020 08:49 AM |
axle back vs catback exhaust | kozzmo49 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 43 | 03-28-2012 09:27 AM |
RPI Designs KOOKS HEADERS AND EXHAUST SYSTEMS on sale thru September! | RPI Designs | V8 Bolt-Ons & Tunes | 3 | 08-04-2010 03:17 PM |
(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s) | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 162 | 07-09-2009 06:39 AM |
Car Law- i.e. tire size, exhaust noise | Kyle.Gilmour | General Automotive + Other Cars Discussion | 11 | 08-06-2007 11:09 AM |