04-05-2015, 11:47 PM | #1 |
Opinions on custom upgrade idea
I have a 99 with the 3.8 v6
Unfortunately there's not much aftermarket support for the 3.8 so here's my idea There's plenty of room in the front of the engine. When looking at cai kits on eBay they were simple tubing going to an open cone filter. My thinking is since there's so much room up front why not do a y tube set up from the engine and have dual cai with one on each side in the front I've looked at some custom threads for intakes on here but never seen anyone try this Is there a such thing as it would give it too much air? What are your thoughts? |
|
04-07-2015, 01:13 PM | #2 |
Really over 60 people looked and no one has an opinion.....?
|
|
04-10-2015, 08:06 PM | #3 |
Drives: '10 Black/IOM Camaro SS/RS Join Date: Mar 2010
Location: Fayetteville NC
Posts: 530
|
I think 3 different companies already have made this exact design. look over on ls1tech for more info
__________________
2010 Camaro 2SS/RS Black/IOM //// 1998 Pontiac Trans AM 819 RWHP @ 12 PSI (Turbo)
|
04-10-2015, 08:07 PM | #4 |
Drives: '10 Black/IOM Camaro SS/RS Join Date: Mar 2010
Location: Fayetteville NC
Posts: 530
|
__________________
2010 Camaro 2SS/RS Black/IOM //// 1998 Pontiac Trans AM 819 RWHP @ 12 PSI (Turbo)
|
|
|
Thread Tools | |
|
|