Albuquerque Cruising! - Page 344 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZZTOM · 07-10-2013, 07:37 PM

Quote:

Originally Posted by Ivan @ Southwest Speed

For my front Fascia and GFX? Hell....I'll fix it if I have to.

You don't want to get rid of your front for a SS with GFX piece. You got the wicked cool Danny Bally scoops man. I dig that front end!!

Been curious to see what you wanted for your fascia.......might need it sooner than later.

If i was to sell the facia you would have to buy the whole car, part of the custom paint is on it.

raidernation3017 · 07-11-2013, 09:02 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

Oh its definitely worse than yours. Lol. The one that got caught in the car wash.

It's gonna need repairs but its got the gm gfx front piece on it that sells for $710. Lol with some v attention, it'll be sweet once again. I just aint got time for it like I thought I would.

Owell, Mine is pretty chipped up. damn rocks

AngelSpeedFreak · 07-11-2013, 09:36 PM

I drove the camaro to work today for the first time in a really long time and on the way home remembered it had an A/C...... damn that thing works pretty well. lol

raidernation3017 · 07-11-2013, 09:46 PM

had to knock the dust off

SSmokinSS · 07-11-2013, 11:02 PM

Quote:

Originally Posted by Ivan @ Southwest Speed

Was there somebody local asking me for the door panels?? The ones with the ABL in them....

Anybody who might want a front GFX piece, make me a deal on my old SS Fascia and come pick it up. Gas money deal stuff and it's yours.

Note to self....if you need (C6) Carlise Blue Paint, you're screwed. Only available in max gallon packs from GM. Paint stores cannot mix it. They can "match" it but we all know how that goes.

Arby's on Paseo has some of the best Arby's in town but the lady at the counter has the personality of a cinder block.

Woot!
Ivan

I'm still prepping for the car wrap. Got a pic of the damage on the GFX? I wouldn't need to paint it, since I will be covering at least the front half of the SS.
Let me know what you want for it...
May be interested in the door panels if they aren't scooped up yet.
My SS is back to stock on the outside. Looks freaky all white again.

AngelSpeedFreak · 07-12-2013, 09:16 AM

Quote:

Originally Posted by raidernation3017

had to knock the dust off

Oh the dust definitely went flying....

Ivan @ Southwest Speed · 07-12-2013, 09:44 AM

Quote:

Originally Posted by ZZTOM

If i was to sell the facia you would have to buy the whole car, part of the custom paint is on it.

I meant your REAR diffuser we talked about..

Quote:

Originally Posted by raidernation3017

Owell, Mine is pretty chipped up. damn rocks

Yours is guaranteed in better shape than mine. LOL

Quote:

Originally Posted by AngelSpeedFreak

I drove the camaro to work today for the first time in a really long time and on the way home remembered it had an A/C...... damn that thing works pretty well. lol

LOL....this guy. LOL Sounding like Andre now. Guessing you got the car back ok??

Quote:

Originally Posted by SSmokinSS

I'm still prepping for the car wrap. Got a pic of the damage on the GFX? I wouldn't need to paint it, since I will be covering at least the front half of the SS.
Let me know what you want for it...
May be interested in the door panels if they aren't scooped up yet.
My SS is back to stock on the outside. Looks freaky all white again.

What's good Phil!! Yes, the fascia would need not only paint, but some work as in filler and prep. Shoot me a text message and I'll get ya a pic this afternoon of it. Heck, I think I owe ya a little don't I? LOL I'll make ya a killer deal on it.

Door panels might be spoken for. Debbie hit me up on em. I was supposed to take them to the CCNM meeting but .....lost a radiator hose on the truck way up on Lomas and Tramway and had to get a bailout from Lawrence. We both missed the meeting. If she doesn't end up scooping em, you're next on the list sir.

Friday....awesome. Oh wait, I have DWE this weekend. Nevermind.

Ivan

AngelSpeedFreak · 07-12-2013, 09:47 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

Guessing you got the car back ok??

Yep, It feels pretty strong but then again I've been driving a Jeep that cant keep at 50mph going up a hill so I guess the difference could be in my mind

Ivan @ Southwest Speed · 07-12-2013, 09:54 AM

Quote:

Originally Posted by AngelSpeedFreak

Yep, It feels pretty strong but then again I've been driving a Jeep that cant keep at 50mph going up a hill so I guess the difference could be in my mind

Might be a marketing strategy that some other shops might be able to benefit from....LOL

Glad to hear you're in it again. Lemme know when y'all get out again. I wanna see that machine run em down in person. Or if you and Expat get after it again. Now that he should be cammed right?!

AngelSpeedFreak · 07-12-2013, 09:58 AM

He isn't cammed yet, but should be soon after he gets home in about 2 weeks.

I have to wait a bit for the track as I still don't have a cage and was warned (before the new power) that I needed a cage or I have to slow down. I will run a pass or two and get the boot for the season until I throw a cage in.

Dragging my feet as always about just doing it already.....

Ivan @ Southwest Speed · 07-12-2013, 10:15 AM

LOL....I forget that Expat has to actually "work." Hopefully he can get that handled up on when he gets back. Or have somebody get that done for him.

Maybe you can hammer the first 1/8th and let up the back half.....lol

...or just go balls out and get the boot so that you know where you stand.

I'd be willing to bet you get a cage in there before you know it. Just a thought but I can't see you not carrying on the way you have been.

Especially if you can get that Snow kit out of the car and actually sell it. Speaking of...lemme go bump it.

AngelSpeedFreak · 07-12-2013, 10:35 AM

Oh I am sure I will do it, I'm just a cheapskate and a procrastinator. Not a good mix when it comes to getting anything done on this expensive car

AngelSpeedFreak · 07-12-2013, 10:37 AM

Quote:

Originally Posted by Ivan @ Southwest Speed

Especially if you can get that Snow kit out of the car and actually sell it. Speaking of...lemme go bump it.

Speaking of Procrastinating.... I have an inbox full of offers to buy that setup but I am just too lazy to pull it out of the car

. lol

Ivan @ Southwest Speed · 07-12-2013, 11:06 AM

Quote:

Originally Posted by AngelSpeedFreak

Oh I am sure I will do it, I'm just a cheapskate and a procrastinator. Not a good mix when it comes to getting anything done on this expensive car

...and how's that car so damn fast again? LOL

Quote:

Originally Posted by AngelSpeedFreak

Speaking of Procrastinating.... I have an inbox full of offers to buy that setup but I am just too lazy to pull it out of the car

. lol

Dude...let's take that ish off and get you some rollbar money. Bring the DP.

07-11-2013, 09:36 PM	#4805
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	I drove the camaro to work today for the first time in a really long time and on the way home remembered it had an A/C...... damn that thing works pretty well. lol __________________

07-12-2013, 09:58 AM	#4812
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	He isn't cammed yet, but should be soon after he gets home in about 2 weeks. I have to wait a bit for the track as I still don't have a cage and was warned (before the new power) that I needed a cage or I have to slow down. I will run a pass or two and get the boot for the season until I throw a cage in. Dragging my feet as always about just doing it already..... __________________

07-12-2013, 10:35 AM	#4814
AngelSpeedFreak Most hated in NM.... Drives: Sold the 6POINT2, went to a 50THZ06 Join Date: Sep 2011 Location: New Mexico Posts: 2,904	Oh I am sure I will do it, I'm just a cheapskate and a procrastinator. Not a good mix when it comes to getting anything done on this expensive car __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CARS AND COFFEE ALBUQUERQUE? ANYONE INTERESTED	jnewberr2ssrs	USA - Southwest	55	05-15-2011 08:55 AM
Moutain Cruise Meet up - Sandia Peak (Albuquerque)	jnewberr2ssrs	USA - Southwest	21	04-02-2010 04:14 PM
Saw a SIM V6 in Albuquerque, NM	BL202	USA - Southwest	3	02-04-2010 09:19 PM
Smokey Mountains and Blue Ridge Parkway cruising.	CamaroSS_LS3	5th Gen Camaro SS LS LT General Discussions	26	09-01-2009 05:12 AM
High altitude cruising	Rob53	Member Car Journals	7	07-16-2009 06:21 PM

07-11-2013, 09:46 PM	#4806
raidernation3017 2nd mosted hated in NM Drives: Tuned for her Pleasure Join Date: Aug 2012 Location: Rio Rancho Posts: 578	had to knock the dust off

07-12-2013, 10:15 AM	#4813
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	LOL....I forget that Expat has to actually "work." Hopefully he can get that handled up on when he gets back. Or have somebody get that done for him. Maybe you can hammer the first 1/8th and let up the back half.....lol ...or just go balls out and get the boot so that you know where you stand. I'd be willing to bet you get a cage in there before you know it. Just a thought but I can't see you not carrying on the way you have been. Especially if you can get that Snow kit out of the car and actually sell it. Speaking of...lemme go bump it.